Installation of a Fujitsu AMUG-XLTH Central Heat Pump in Notre-Dame-de-Grâce, Montreal
Discover the installation of the Fujitsu AMUG-XLTH central heat pump in Notre-Dame-de-Grâce. Offering exceptional performance and energy efficiency, this heating and cooling system is ideal for Montreal residents.
Take a tour of the installation
Each number is a point we check on site. Switch between summer and winter to watch air and heat move.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
It captures or rejects heat outside. It sits on a level base, above the snow, with free space all around.
The insulated refrigerant lines enter the house through a sealed opening and run to the indoor coil.
A shut-off switch near the outdoor unit isolates it safely for service.
Sitting on the indoor module, it moves heat between the house air and the refrigerant.
Electric furnace or air handler: its fan pushes air through the ducts. The electric backup takes over in extreme cold.
Supply ducts bring air to the rooms; returns bring it back to the unit. Their condition matters as much as the unit's.
It protects the coil and the fan. A dirty filter cuts airflow, so it gets checked regularly.
It runs the heat pump and the backup heat. It must be compatible with the installed system.
At AirGreen, we are proud to present the recent installation of a Fujitsu AMUG-XLTH central heat pump in Notre-Dame-de-Grâce, Montreal. This installation is part of our efforts to provide efficient and sustainable heating and cooling solutions tailored to our clients' specific needs.
Why Choose the Fujitsu AMUG-XLTH Central Heat Pump?
The Fujitsu AMUG-XLTH is a high-performance central heat pump from the Infinite Comfort series, designed to deliver optimal comfort in various environments. Thanks to Inverter technology, this heat pump guarantees heating performance up to 67% better compared to a standard model. Additionally, it is eligible for a grant of up to $5,000, making it even more accessible for residents of Montreal, Laval, Longueuil, and the North and South Shores.
Key Features of the Fujitsu AMUG-XLTH Heat Pump
-
Exceptional energy efficiency: With a SEER up to 19.0 and a COP of 3.64, this heat pump ensures energy savings while providing optimal heating and cooling performance.
-
Compact outdoor unit: Designed to be installed in tight spaces, this single or double fan outdoor unit allows for space savings without compromising performance.
-
Low noise level: With its variable-speed compressor, the system operates at reduced noise levels, ensuring a quiet indoor environment even under heavy use.
-
Constant indoor temperature: With its smart control and Wi-Fi compatibility, you can easily manage the temperature of your home from anywhere using the FGLair app or smart systems like Amazon Echo or Google Home.
The Fujitsu AMUG-XLTH Heat Pump Installation Process in Notre-Dame-de-Grâce
The installation of the Fujitsu AMUG-XLTH central heat pump in Notre-Dame-de-Grâce was completed during the winter months, with a cold outdoor environment, a situation our technicians are well-equipped to handle. Here are the key steps of the process:
-
Site preparation: Before installation, our team thoroughly inspected the location to ensure that the outdoor unit could be optimally placed while respecting the clearance space requirements.
-
Outdoor unit installation: The outdoor unit was secured on a stable platform to avoid excessive vibration and ensure prolonged durability. The gas and liquid connections (3/8" and 5/8") were also checked to ensure smooth and efficient performance.
-
Indoor unit installation: The indoor unit was strategically placed to allow for optimal airflow throughout the living space while remaining discreet. Due to its compact design, only 21 inches of clearance at the front were required for maintenance.
-
Testing and commissioning: After installation, our technicians conducted thorough tests to ensure the system was functioning as expected, adjusting the unit's settings to maximize efficiency.
Benefits for the Client and Recommendations
One of the main advantages of this installation is the improved energy efficiency, which allows the client to save on heating and cooling bills. Additionally, the Wi-Fi compatibility offers remote control, ensuring constant comfort throughout the year.
We also recommend regular maintenance of your system to guarantee its longevity and maintain optimal performance. At AirGreen, we offer preventive maintenance services to ensure your Fujitsu heat pump operates at its best.
Conclusion
The installation of the Fujitsu AMUG-XLTH central heat pump in Notre-Dame-de-Grâce highlights AirGreen’s commitment to providing high-quality, reliable, and high-performance HVAC solutions for our clients. With its cutting-edge technology, exceptional comfort features, and energy efficiency, this heat pump is an excellent choice for residents of Montreal, Laval, Longueuil, and the surrounding areas.
The big day, step by step
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the ducts, the current indoor module, the electrical panel and the planned spot for the outdoor unit.
The equipment combination, capacity and price, in writing. We check whether the combination qualifies for assistance programs.
Access protected, old unit disconnected and removed when it is being replaced.
Electric furnace or air handler, with its coil, connected to the supply and return ducts.
On a level base, raised above the snow, with free space all around.
Insulated, they enter through a sealed opening and run to the indoor coil.
Dedicated circuits, accessible disconnect, a thermostat that works with the heat pump and the backup heat.
Leak test, vacuum, start-up, airflow check and a test of both modes.
Filter, thermostat, backup heat in extreme cold: what to know before winter.
- The on-site estimateWe look at the ducts, the current indoor module, the electrical panel and the planned spot for the outdoor unit.
- The quoteThe equipment combination, capacity and price, in writing. We check whether the combination qualifies for assistance programs.
- Getting readyAccess protected, old unit disconnected and removed when it is being replaced.
- The indoor moduleElectric furnace or air handler, with its coil, connected to the supply and return ducts.
- The outdoor unitOn a level base, raised above the snow, with free space all around.
- The refrigerant linesInsulated, they enter through a sealed opening and run to the indoor coil.
- Electrical and thermostatDedicated circuits, accessible disconnect, a thermostat that works with the heat pump and the backup heat.
- Tests and start-upLeak test, vacuum, start-up, airflow check and a test of both modes.
- The walkthroughFilter, thermostat, backup heat in extreme cold: what to know before winter.
What would it look like at your place?
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
Four mistakes we do not make
Flip each card to see what we do instead.
Your own project, step by step
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Check the indoor module's filter.
- Clear winter debris from the outdoor unit.
- Test cooling before the heat arrives.
- Check the filter more often in peak season.
- Keep registers and returns clear.
- Watch condensate drainage near the coil.
- Change or clean the filter.
- Test heating and backup heat before the cold.
- Book periodic maintenance.
- Clear snow around the outdoor unit.
- Store nothing in front of the indoor module.
- Note any unusual noise or smell and call us.
Is your home ready?
Check what applies at your place. A "no" is not a refusal: it is what we sort out during the estimate.
Four statements: true or false?
It all comes down to details you have just seen.
1. A central heat pump uses the house's ducts.
It connects to the existing ducts to heat and cool everywhere.
2. In extreme cold, electric backup heat can take over.
The indoor module (furnace or air handler) works with the heat pump and takes over in extreme cold.
3. The filter only gets changed when the unit breaks down.
A dirty filter cuts airflow. It gets checked regularly.
4. You can reuse the old unit's size without checking.
The house may have changed: insulation, windows, added rooms. Capacity is confirmed on site.
0 / 4 right answers
What people ask us about this kind of work
Can I keep my current ducts?
What happens in extreme cold?
Furnace, air handler, ducted: what is the difference?
Are there grants?
Do I need a permit?
How much can I save?
How is the LogisVert assistance calculated?
Will my current thermostat work?
Central or wall units: which one?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
Every house has its constraints. We see them before we install.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).