Installation of a Gree Crossover Wall-Mounted Heat Pump in Pierrefonds-Roxboro
Step into the story of a home transformed by AirGreen with the Gree Crossover, where silent efficiency meets custom comfort in Pierrefonds-Roxboro.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
A Tale of Comfort: The Gree Crossover Transformation in Pierrefonds-Roxboro
Introduction to Excellence
In the heart of Pierrefonds-Roxboro, a suburb known for its picturesque landscapes and vibrant community, AirGreen embarked on an HVAC journey that not only showcased our technical prowess but also underscored our commitment to delivering unparalleled comfort. The installation of a Gree Crossover Wall-Mounted Heat Pump stands as a testament to our dedication to quality, efficiency, and customer satisfaction.
Why Choose Gree Crossover?
Unmatched Efficiency and Control
The Gree Crossover is not just any heat pump; it's a marvel of modern HVAC technology. With a staggering 23.0 SEER efficiency, this unit is designed to provide maximum comfort with minimal energy consumption. The inclusion of WiFi control and the GREE+ app offers users an unprecedented level of control and convenience, allowing for adjustments from anywhere at any time.
Designed for Comfort
Gree's proprietary G10 Inverter technology ensures that the Crossover operates at peak efficiency, regardless of the weather conditions outside. From its adjustable LED display to its multi-speed fan and precise airflow control, every feature of this heat pump is engineered for your comfort. The dehumidification and smart preheating functions further enhance the living environment, making your home a haven of comfort year-round.
Silence and Sustainability
One of the standout features of the Gree Crossover is its silent operation. With sound pressure levels as low as 35 dB(A) indoors, it ensures that your peace and quiet are undisturbed. Furthermore, the use of Eco-responsible refrigerant R410A highlights our commitment to sustainability, making the Gree Crossover an environmentally friendly choice for heating and cooling.
The Installation Story: A Symphony of Skill and Precision
Our latest installation in Pierrefonds-Roxboro was not just a routine job; it was a showcase of AirGreen's expertise and meticulous planning. The homeowner's request for the indoor unit to be placed on the front-facing wall and the outdoor unit on the side of the house presented us with a unique set of challenges. However, our skilled technicians rose to the occasion, ensuring that the entire installation process was smooth, efficient, and tailored to the homeowner's needs.
The extra piping needed for the outdoor unit's placement was expertly handled, ensuring optimal performance and aesthetics. The strategic placement of the electrical wiring, taking advantage of the electrical panel's location, exemplified our attention to detail and our commitment to providing customized solutions that go beyond expectations.
Customer Delight: The Ultimate Reward
The homeowner's reaction to the completed installation was nothing short of ecstatic. The silence and efficiency of the Gree Crossover, coupled with AirGreen's professional and clean installation, left them thoroughly impressed. Their satisfaction reaffirms our belief that at the heart of every successful installation is a happy customer.
Warranty and Grants: Peace of Mind Included
With the Gree Crossover, peace of mind is part of the package. The 10-10-10 extended warranty on the compressor, parts, and labor ensures that your investment is protected for years to come. Additionally, the eligibility for Federal and Provincial Grants makes the Gree Crossover an even more attractive option for those looking to enhance their home's HVAC system.
Why AirGreen?
Choosing AirGreen for your HVAC needs means partnering with a company that puts quality, efficiency, and customer satisfaction at the forefront. Our experienced team is dedicated to providing solutions that not only meet but exceed your expectations. From our meticulous installation process to our after-sales support, we are with you every step of the way.
Conclusion: Your Comfort, Our Commitment
The installation of the Gree Crossover Wall-Mounted Heat Pump in Pierrefonds-Roxboro is more than just another project for us; it's a symbol of our commitment to delivering the highest level of comfort and satisfaction to our customers. At AirGreen, we believe in creating environments where warmth and coolness coexist harmoniously, powered by the most advanced and efficient HVAC solutions available.
Let us help you transform your home into a sanctuary of comfort and efficiency. Contact AirGreen today and experience the difference that comes with choosing the best in the business.
How it goes, from the first call to the end
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
Model, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
Floors and furniture protected, wall plate position marked level, wall opening located.
A single opening, with the slope the drain needs to flow outside.
Set on a stand raised above the snow, with the clearances the manufacturer requires.
Connected, insulated and protected. The opening is then sealed against water, cold air and insects.
A dedicated circuit and an accessible disconnect near the outdoor unit.
Leak test, vacuum, then start-up and a check of heating and cooling.
Remote, modes, filters: we show you the essentials before we leave.
- The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
- The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
- Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
- The wall openingA single opening, with the slope the drain needs to flow outside.
- The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
- Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
- The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
- Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
- The walkthroughRemote, modes, filters: we show you the essentials before we leave.
And at your place?
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
Which type of equipment for your project?
Pick what looks like your need.
Four mistakes we do not make
Flip each card to see what we do instead.
What people ask us about this kind of work
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
How cold can it heat?
How much can I save?
How is the LogisVert assistance calculated?
Is it noisy?
The outdoor unit is covered in ice: is that normal?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
Useful pages for what comes next
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
Tell us about your house. We come and see it for free.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).