Installation of a Gree Crossover Wall-Mounted Heat Pump in Senneville
Discover the silent, efficient comfort of the Gree Crossover heat pump installed by AirGreen in Senneville, where technology meets tailored solutions.
- City
- Region
- Equipment
- Brand
- Challenges
- Published
The job on one screen
The article, chapter by chapter
The Perfect Harmony of Comfort and Technology
When it comes to enhancing the comfort of your living space, the choice of a heating, ventilation, and air conditioning (HVAC) system plays a pivotal role. AirGreen, a leading HVAC company based in Montréal, recently completed an installation that exemplifies the seamless blend of modern technology, efficiency, and customer-centric solutions. In the picturesque locale of Senneville, a Gree Crossover wall-mounted heat pump was installed, marking yet another successful project that underscores our commitment to excellence and innovation in HVAC services.
Project Overview: A Tale of Tailored Comfort
This project came to fruition as a result of a client's discerning need for an additional heat pump specifically designed for their living room. Despite having a Gree heat pump already installed, the homeowner sought to augment the airflow and maintain a consistent temperature throughout the area, ensuring that comfort is never compromised. The Gree Crossover model, known for its compact size, silent operation, and high efficiency, emerged as the ideal solution.
Key Features of the Gree Crossover Heat Pump:
- Energy Efficiency: Boasting a 25.3 SEER rating, this unit is a testament to energy-saving technology, making it an eco-friendly and cost-effective choice for homeowners.
- Connectivity and Control: With WiFi capabilities, users can easily control their home’s climate remotely, adding a layer of convenience and modernity.
- Silent Operation: The indoor unit operates at a sound pressure level of 25/40 dB(A), ensuring that your peace and quiet are undisturbed.
- Extended Warranty: Offering a comprehensive 10-year warranty on the compressor, parts, and labor, the Gree Crossover stands as a symbol of reliability and trust.
- Provincial Grant Eligibility: The model qualifies for a $365 provincial grant, making it an even more attractive investment for the eco-conscious homeowner.
The Installation Journey: Simplicity Meets Sophistication
The installation process in Senneville was a straightforward affair, yet it encapsulated the expertise and attention to detail that AirGreen is renowned for. Recognizing the importance of aesthetics in addition to functionality, our team meticulously concealed all pipes and electrical wiring behind the indoor unit. This not only ensured a clutter-free and visually appealing setup but also reflected our dedication to delivering clean and professional installation jobs.
Customer Satisfaction: The Heart of Our Mission
The homeowner's delight upon the project's completion was palpable. The Gree Crossover not only met but exceeded their expectations, particularly with its silent operation and the aesthetically pleasing installation. Such positive feedback is the cornerstone of our motivation at AirGreen, driving us to continue providing unmatched HVAC solutions that cater to the unique needs of each customer.
Why Choose AirGreen for Your HVAC Needs?
- Expertise in HVAC Solutions: With years of experience serving Montreal, Laval, Longueuil, North Shore, and South Shore, our skilled team is equipped to handle installations of any complexity.
- Customer-Centric Approach: We understand that every home is unique, which is why we offer personalized HVAC solutions tailored to your specific requirements and preferences.
- Commitment to Quality: From selecting the finest equipment to ensuring impeccable installation, quality is at the forefront of everything we do.
In Conclusion
The installation of the Gree Crossover wall-mounted heat pump in Senneville is a testament to AirGreen's expertise, commitment to quality, and the pursuit of customer satisfaction. As we continue to navigate the evolving landscape of HVAC technology, our mission remains clear: to provide innovative, efficient, and tailored solutions that enhance the comfort and wellbeing of our clients.
The job tools
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
How the job unfolds
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
Model, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
Floors and furniture protected, wall plate position marked level, wall opening located.
A single opening, with the slope the drain needs to flow outside.
Set on a stand raised above the snow, with the clearances the manufacturer requires.
Connected, insulated and protected. The opening is then sealed against water, cold air and insects.
A dedicated circuit and an accessible disconnect near the outdoor unit.
Leak test, vacuum, then start-up and a check of heating and cooling.
Remote, modes, filters: we show you the essentials before we leave.
- The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
- The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
- Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
- The wall openingA single opening, with the slope the drain needs to flow outside.
- The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
- Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
- The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
- Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
- The walkthroughRemote, modes, filters: we show you the essentials before we leave.
What we check on a job like this one
Each number is a point we check on site. Switch between summer and winter to watch air and heat move.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
Is your home ready?
Check what applies at your place. A "no" is not a refusal: it is what we sort out during the estimate.
Good habits, once the unit is in place
Six simple habits that keep the unit going. Your list stays on this device.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
The right pages, at the right time
Four statements: true or false?
It all comes down to details you have just seen.
1. In heating mode, the outdoor unit can produce water.
During defrost cycles. That water must drain away without forming ice.
2. You pick the capacity with a simple square-footage rule.
Windows, insulation, orientation and how the room is used all count. Capacity is chosen on site.
3. A multi-zone connects several indoor heads to a single condenser.
One head per room, all on the same condenser. Each room keeps its own temperature.
4. The disconnect can sit behind the patio furniture.
It must stay accessible: it is what shuts the unit off for service.
0 / 4 right answers
What people ask us about this kind of work
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
How cold can it heat?
How much can I save?
How is the LogisVert assistance calculated?
Is it noisy?
The outdoor unit is covered in ice: is that normal?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
An on-site estimate, the right capacity, the right equipment.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).