Installation of a Gree Extreme Wall-Mounted Heat Pump in Repentigny
Experience the future of home comfort with AirGreen's expert installation of the Gree Extreme Heat Pump in Repentigny—where technology meets tranquility.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
Transforming Comfort with Precision and Style
In the quaint town of Repentigny, a local homeowner recently experienced a significant upgrade to their home’s comfort system with the installation of the Gree Extreme Wall-Mounted Heat Pump, a pinnacle of efficiency and design. AirGreen, a leader in heating, ventilation, and air conditioning services throughout Montreal and its surrounding areas, was at the forefront of this sophisticated installation. Let’s dive into the details of this project that not only enhanced the homeowner's living space but also embodied the epitome of modern heating technology.
Innovative Installation in a Challenging Space
Nestled next to the bustling kitchen area, the installation of the Gree Extreme indoor unit presented a unique challenge. The desired location, not being an exterior wall, required a creative approach to route the connecting pipes. Our skilled technicians devised a smart solution by running the pipes along the near-ceiling wall, ensuring they remained unobtrusive yet functional. Post-installation, a professional plasterer was brought in to encase the pipes in a custom-designed box, finished with gyprock and paint matched precisely to the existing walls, rendering the installation practically invisible.
Top-Tier Technology Meets Aesthetic Appeal
The Gree Extreme model is not just about superior functionality; it’s also a statement of style. With its sleek design and compact dimensions, the unit blends seamlessly into any decor, further enhanced by the discreet pipe installation. The Heat Pump operates at an impressively low sound pressure level, making it one of the quietest on the market. This ensures that comfort comes without the common annoyance of noisy operation, making it a perfect fit for the serene environment of a home.
Unmatched Efficiency and Comfort
The Gree Extreme is renowned for its Energy Star® certification, symbolizing peak efficiency. With a 30.5 SEER rating, it stands out for its energy-saving capabilities. This model is equipped with G10 inverter technology, allowing for faster room temperature adjustments while reducing energy consumption. Additionally, the ability to heat effectively even at temperatures as low as -30°C makes this heat pump a stalwart companion through the harsh Canadian winters.
Smart Features for Enhanced Usability
Equipped with WiFi capabilities and the Gree+ app, the homeowner can effortlessly control the heat pump remotely, ensuring optimal comfort from anywhere. The unit's intelligent defrosting system prevents the buildup of ice without the need for manual intervention, a necessary feature in the frosty Canadian climate.
A Financially Smart Choice
This installation was not only about adding comfort but also about maximizing financial savings. The homeowner took advantage of a substantial $1,704 provincial grant provided by the LogisVert Program, making this high-quality upgrade more accessible. The full 10-year warranty on parts, labor, and compressor, courtesy of Gree Canada, further underscores the value of this investment, promising years of reliable service and peace of mind.
Conclusion: A Testament to Expertise and Quality
This installation showcases AirGreen’s commitment to delivering high-quality HVAC solutions that are both effective and aesthetically pleasing. The seamless integration of the Gree Extreme heat pump into the customer's home in Repentigny not only enhances the comfort and usability of the space but also aligns with sustainable practices, thanks to its energy-efficient design. It’s a prime example of how advanced technology and thoughtful installation can come together to create a harmonious living environment.
Another very happy and satisfied customer, testament to AirGreen's dedication to excellence and customer satisfaction in the realm of HVAC installations. If you’re looking to transform your home heating system, choose AirGreen for a blend of style, efficiency, and top-tier technology.
How it goes, from the first call to the end
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
Model, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
Floors and furniture protected, wall plate position marked level, wall opening located.
A single opening, with the slope the drain needs to flow outside.
Set on a stand raised above the snow, with the clearances the manufacturer requires.
Connected, insulated and protected. The opening is then sealed against water, cold air and insects.
A dedicated circuit and an accessible disconnect near the outdoor unit.
Leak test, vacuum, then start-up and a check of heating and cooling.
Remote, modes, filters: we show you the essentials before we leave.
- The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
- The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
- Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
- The wall openingA single opening, with the slope the drain needs to flow outside.
- The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
- Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
- The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
- Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
- The walkthroughRemote, modes, filters: we show you the essentials before we leave.
And at your place?
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
Which type of equipment for your project?
Pick what looks like your need.
Four mistakes we do not make
Flip each card to see what we do instead.
What people ask us about this kind of work
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
How cold can it heat?
How much can I save?
How is the LogisVert assistance calculated?
Is it noisy?
The outdoor unit is covered in ice: is that normal?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
Useful pages for what comes next
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
Tell us about your house. We come and see it for free.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).