Installation of a Gree Sapphire Mini-Split in Kirkland, Montreal
Explore how the Gree Sapphire Mini-Split transforms homes in Montreal with sleek design, superior efficiency, and ultimate comfort—choose AirGreen for your HVAC needs.
- City
- Region
- Equipment
- Brand
- Challenges
- Published
The job on one screen
The article, chapter by chapter
Experience the Future of Comfort with Gree
In the scenic suburb of Kirkland, Montreal, our latest installation of the Gree Sapphire 18,000 BTU Mini-Split has set a new benchmark for residential HVAC solutions. AirGreen, renowned for our dedication to enhancing indoor air quality and comfort across Greater Montreal, Laval, Longueuil, North Shore, and South Shore, recently completed this state-of-the-art installation, marrying cutting-edge technology with exceptional energy efficiency.
Why Choose Gree Sapphire?
The Gree Sapphire represents the pinnacle of ductless heating and cooling systems. With an impressive 24.5 SEER efficiency rating and the capability to provide ultra-efficient heating down to -30°C, this unit is not only powerful but also extraordinarily resilient. The inclusion of Wi-Fi connectivity and compatibility with the GREE+ app allows homeowners to adjust their indoor climate from anywhere, ensuring optimal comfort at all times.
The Installation Story
Our journey began when a family in Kirkland sought a sustainable and powerful heating and cooling solution that could handle the harsh Canadian winters and humid summers without compromising on their home's aesthetic. After a detailed consultation, the Gree Sapphire Mini-Split emerged as the ideal choice due to its sleek design and superior functionality.
The installation was strategically planned to ensure minimal disruption to the family’s daily life. Our certified technicians, equipped with years of expertise, conducted the installation efficiently. They installed the indoor unit above the large living room window, ensuring it blends seamlessly with the interior decor. The outdoor unit was placed discreetly on the side of the house, maintaining the home's external beauty.
Key Features of the Gree Sapphire Mini-Split
- Energy Star® certified: Promises lower electricity bills and reduced environmental impact.
- WiFi Included: Manage your climate from anywhere with an internet connection.
- High Efficiency: Up to 24.5 SEER and 15 HSPF for superior energy savings.
- Quiet Operation: The indoor unit operates at a sound level of 34 dB, quieter than a whispered conversation.
- Advanced Filtration: Offers improved air quality, making it ideal for allergy sufferers.
- Robust Warranty: Includes a 12-year warranty on both the compressor and parts.
Environmental Impact and Savings
Choosing the Gree Sapphire Mini-Split not only reduces carbon footprint but also offers considerable savings through the $1,704 LogisVert Grant by Hydro-Québec. This installation not only aligns with our commitment to sustainable living but also provides the homeowner with significant financial benefits through reduced energy consumption.
What This Means for You
This installation exemplifies our commitment to delivering tailored solutions that meet our clients' specific needs. Whether you are looking to upgrade your heating system or install a new cooling unit, AirGreen ensures that every project is handled with the utmost precision and care, promising a seamless integration of technology and design.
At AirGreen, we are not just about installing units; we are about creating environments where comfort and sustainability coexist. This recent project in Kirkland is a testament to our expertise and dedication to providing high-quality service that exceeds expectations.
Choose Comfort, Choose AirGreen
Are you ready to transform your home into a haven of comfort and efficiency? Contact AirGreen today, and let us help you find the perfect Gree product for your needs. Remember, when you choose us, you choose a partner who values your comfort as much as you do.
The job tools
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
How the job unfolds
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
Model, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
Floors and furniture protected, wall plate position marked level, wall opening located.
A single opening, with the slope the drain needs to flow outside.
Set on a stand raised above the snow, with the clearances the manufacturer requires.
Connected, insulated and protected. The opening is then sealed against water, cold air and insects.
A dedicated circuit and an accessible disconnect near the outdoor unit.
Leak test, vacuum, then start-up and a check of heating and cooling.
Remote, modes, filters: we show you the essentials before we leave.
- The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
- The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
- Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
- The wall openingA single opening, with the slope the drain needs to flow outside.
- The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
- Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
- The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
- Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
- The walkthroughRemote, modes, filters: we show you the essentials before we leave.
What we check on a job like this one
Each number is a point we check on site. Switch between summer and winter to watch air and heat move.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
Is your home ready?
Check what applies at your place. A "no" is not a refusal: it is what we sort out during the estimate.
Good habits, once the unit is in place
Six simple habits that keep the unit going. Your list stays on this device.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
The right pages, at the right time
Four statements: true or false?
It all comes down to details you have just seen.
1. In heating mode, the outdoor unit can produce water.
During defrost cycles. That water must drain away without forming ice.
2. You pick the capacity with a simple square-footage rule.
Windows, insulation, orientation and how the room is used all count. Capacity is chosen on site.
3. A multi-zone connects several indoor heads to a single condenser.
One head per room, all on the same condenser. Each room keeps its own temperature.
4. The disconnect can sit behind the patio furniture.
It must stay accessible: it is what shuts the unit off for service.
0 / 4 right answers
What people ask us about this kind of work
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
How cold can it heat?
How much can I save?
How is the LogisVert assistance calculated?
Is it noisy?
The outdoor unit is covered in ice: is that normal?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
An on-site estimate, the right capacity, the right equipment.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).