Installation of a Sharp ZU1 Mini Split in Charlemagne, North Shore
Transform your home with the Sharp ZU1 Mini Split—superior comfort, advanced technology, and sustainability in one smart solution.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
Discover the Sharp ZU1: A Smart Choice for Your Home Comfort
The Context of This Installation
Nestled in the serene town of Charlemagne on the North Shore, our latest project at AirGreen involved installing a state-of-the-art Sharp ZU1 Mini Split. This unit, known for its robust features and energy efficiency, was selected to provide both cooling and heating solutions to a residential client who prioritizes environmental sustainability and modern living comforts.
The Sharp ZU1: Features and Functionality
Key Specifications
- Cooling Capacity: 15,000 BTU
- Heating Capacity: Works down to -27°C
- Model Numbers: Interior - AY-XP15ZU1, Exterior - AE-X15ZU1
- Dimensions: Interior Unit (41.42 x 9.80 x 12.44 inches), Exterior Unit (30.72 x 10.59 x 21.25 inches)
- Sound Pressure Level: Interior - 23/46 dB(A), Exterior - 49.0 dB(A)
- Energy Efficiency: 24.0 SEER
- Freon Type: R-32, an environmentally friendlier option
Cutting-Edge Technologies
The Sharp ZU1 mini split is not just any heat pump; it’s equipped with several groundbreaking features:
- Plasmacluster Technology: Offers unmatched air purification, eliminating viruses, mold, and odors, providing a healthier indoor environment.
- Coanda Airflow Control: Ensures uniform air distribution without direct drafts, enhancing comfort in every corner of your home.
- Inverter Technology: Adjusts the operation to maintain consistent temperatures with greater energy efficiency, reducing electricity costs.
The Installation Story: Enhancing Lifestyle and Comfort
Our journey began when a family in Charlemagne reached out with a need to upgrade their home’s HVAC system. Their primary concern was finding a solution that would not only provide comfort but also align with their commitment to reducing environmental impact. The Sharp ZU1, with its R-32 refrigerant and high SEER rating, emerged as the perfect fit.
The installation process was meticulously planned to accommodate the aesthetics and functionality of their home. Positioned above the main doorway, the indoor unit blends seamlessly with the interior decor while ensuring optimal airflow. The exterior unit was strategically placed to minimize noise and maximize efficiency.
Why Choose the Sharp ZU1 Mini Split?
Efficient Performance in Extreme Conditions
One of the standout features of the Sharp ZU1 is its ability to perform efficiently under extreme weather conditions. Capable of heating in temperatures as low as -27°C, it provides reliable comfort during the harsh North Shore winters. Additionally, the advanced defrosting system shortens cycles and maintains a more stable indoor temperature.
Sustainable and Smart Technology
The choice of R-32 refrigerant not only enhances the unit's efficiency but also decreases its carbon footprint. Paired with smart connectivity features, such as real-time energy monitoring and remote control via a smartphone app, the Sharp ZU1 represents the pinnacle of modern, sustainable home comfort.
Benefits of Installing with AirGreen
Choosing AirGreen means partnering with experts who value quality and customer satisfaction. Our team ensures:
- Expert Installation: We provide professional, timely installations with attention to detail, ensuring your system performs optimally from day one.
- Tailored Solutions: Each installation is customized to meet the unique needs and preferences of our clients, backed by in-depth consultations and planning.
- Comprehensive Warranty and Support: Enjoy peace of mind with our robust warranty terms and responsive customer service.
Conclusion: A Partnership for Comfort and Sustainability
The installation of the Sharp ZU1 Mini Split in Charlemagne is more than just an upgrade—it’s a step towards smarter, more sustainable living. With AirGreen, you choose a partner dedicated to enhancing your home comfort while respecting the planet.
How it goes, from the first call to the end
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
Model, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
Floors and furniture protected, wall plate position marked level, wall opening located.
A single opening, with the slope the drain needs to flow outside.
Set on a stand raised above the snow, with the clearances the manufacturer requires.
Connected, insulated and protected. The opening is then sealed against water, cold air and insects.
A dedicated circuit and an accessible disconnect near the outdoor unit.
Leak test, vacuum, then start-up and a check of heating and cooling.
Remote, modes, filters: we show you the essentials before we leave.
- The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
- The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
- Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
- The wall openingA single opening, with the slope the drain needs to flow outside.
- The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
- Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
- The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
- Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
- The walkthroughRemote, modes, filters: we show you the essentials before we leave.
What the unit delivers when it is cold
The range as published on airgreen.ca: pick a size to see its capacity in deep cold.
| Size | Heating at −8 °C | Heating at −15 °C | Coldest certified point | COP at −15 °C | SEER | HSPF | Indicative LogisVert aid |
|---|---|---|---|---|---|---|---|
| Sharp ZU1 12 000 | 14,500 | 12,000 | −27 °C: 7,200 | 2.11 | 22.0 | 11.0 | $1,740 |
| Sharp ZU1 15 000 | 18,100 | 15,300 | −27 °C: 10,100 | 2.1 | 24.0 | 11.0 | $2,172 |
| Sharp ZU1 18 000 | 22,000 | 18,000 | −27 °C: 11,500 | 2.2 | 24.0 | 11.0 | $2,640 |
| Sharp ZU1 24 000 | 22,400 | 19,000 | −27 °C: 12,300 | 2.2 | 22.0 | 11.0 | $2,688 |
According to NEEP, it delivers 14,500 BTU/h at −8 °C (17 °F), more than at 8 °C (14,000 BTU/h). It heats as hard in moderate cold as in mild weather.
According to NEEP, its certified maximum capacity at −27 °C (−17 °F) is 7,200 BTU/h, 60% of its nominal 12,000 BTU size.
At 8 °C, its certified maximum capacity reaches 17,100 BTU/h, 42% more than its nominal 12,000 BTU size.
According to NEEP, it delivers 18,100 BTU/h at −8 °C (17 °F), more than at 8 °C (18,000 BTU/h). It heats as hard in moderate cold as in mild weather.
According to NEEP, its certified maximum capacity at −27 °C (−17 °F) is 10,100 BTU/h, 67% of its nominal 15,000 BTU size.
At 8 °C, its certified maximum capacity reaches 21,800 BTU/h, 45% more than its nominal 15,000 BTU size.
According to NEEP, it delivers 22,000 BTU/h at −8 °C (17 °F), more than at 8 °C (21,600 BTU/h). It heats as hard in moderate cold as in mild weather.
According to NEEP, its COP at −27 °C is 1.88: the highest of the ZU1 line, which ranges from 1.79 to 1.82 at that temperature.
According to NEEP, its certified maximum capacity at −27 °C (−17 °F) is 11,500 BTU/h, 64% of its nominal 18,000 BTU size.
At −27 °C, its certified minimum capacity is 3,200 BTU/h (5,500 at 8 °C). It slows down instead of cycling on and off.
According to NEEP, its certified heating capacity at −15 °C (5 °F) is 19,000 BTU/h, 79% of its nominal 24,000 BTU size. Its COP there is 2.20.
Data read live from the airgreen.ca page of each size (NEEP / AHRI certified performance). When the title names the installed size, it is highlighted; otherwise the whole range is shown. The aid shown is today’s, using Hydro-Québec’s rule ($120 per 1,000 BTU/h at −8 °C); amounts quoted in the article date from its publication. Only Hydro-Québec confirms the assistance granted.
And at your place?
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Baseboards and electric furnaces turn 1 kWh of electricity into 1 kWh of heat. A heat pump delivers more: that is its COP. At Hydro-Québec’s rate D (11.142¢/kWh above 40 kWh a day, since 1 April 2026):
Hydro-Québec: a heat pump can be up to three times more efficient than baseboards for heating in the colder months.
Estimate per kWh of heat, at the chosen temperature, using the certified COP from the product page. Taxes, access charge and backup heat not included.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
Which type of equipment for your project?
Pick what looks like your need.
Four mistakes we do not make
Flip each card to see what we do instead.
What people ask us about this kind of work
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
How cold can it heat?
How much can I save?
How is the LogisVert assistance calculated?
Is it noisy?
The outdoor unit is covered in ice: is that normal?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
Useful pages for what comes next
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
Tell us about your house. We come and see it for free.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).