Repair

Repair of an Air Handler in Old Port

Our AirGreen team recently repaired a Lincoln air handler in Old Port, restoring its functionality with electrical repairs and a thorough cleaning. Discover our HVAC repair expertise in Montreal.

By AirGreen Climatisation & Chauffage Admin3 min read
Repair of an Air Handler in Old Port
Repair of an Air Handler in Old Port
Generic diagram: central heat pump, indoor module and ducts

In summer, the outdoor unit rejects the house's heat outside.

Generic illustration of this type of installation, not a survey of this job site. Tap a number.

  1. It captures or rejects heat outside. It sits on a level base, above the snow, with free space all around.

  2. The insulated refrigerant lines enter the house through a sealed opening and run to the indoor coil.

  3. A shut-off switch near the outdoor unit isolates it safely for service.

  4. Sitting on the indoor module, it moves heat between the house air and the refrigerant.

  5. Electric furnace or air handler: its fan pushes air through the ducts. The electric backup takes over in extreme cold.

  6. Supply ducts bring air to the rooms; returns bring it back to the unit. Their condition matters as much as the unit's.

  7. It protects the coil and the fan. A dirty filter cuts airflow, so it gets checked regularly.

  8. It runs the heat pump and the backup heat. It must be compatible with the installed system.

Repair of a Lincoln Electric Furnace Air Handler in Old Port

At AirGreen, we specialize in HVAC repairs and maintenance of heating, ventilation, and air conditioning (HVAC) equipment throughout the Montreal, Laval, Longueuil, and North and South Shore regions. Recently, our team was called to repair a Lincoln air handler in Old Port, an electric furnace model that was no longer working properly. This article will detail the challenges encountered during the repair and how we restored the unit to full functionality, ensuring the comfort of our customer.

Identified Issue: Lincoln Air Handler Breakdown

During our service call, the customer reported that their Lincoln air handler was malfunctioning. This heating and ventilation unit had stopped blowing air, causing discomfort throughout the house. A quick analysis revealed that the device had a blockage in the electrical circuit, as well as a buildup of dust in the internal components that was affecting its proper functioning.

Accurate Diagnosis and Analysis

One of the first steps in our process is to perform a precise diagnosis of the unit. In this case, the Lincoln air handler was unresponsive to heating commands, despite repeated attempts by the owner. After isolating the unit and inspecting the electrical connections, we found a minor short circuit in the furnace’s system. Additionally, a thorough cleaning of the filters and ducts was needed to prevent future blockages.

Repair Steps Taken

We took several steps to effectively repair the air handler. Here is an overview of the actions taken by our technicians:

  1. Disconnection and Isolation of the Unit: For safety, we first cut the power to the air handler.

  2. Inspection and Repair of the Electrical System: After opening the control panel, we located the short circuit. We had to replace some damaged electrical wiring.

  3. Complete Cleaning of Internal Components: We conducted a deep cleaning of the air handler’s internal system, removing accumulated dust from the fans and filters, which is essential to maintain optimal performance and avoid motor overload.

  4. Final Functionality Test: Once the repairs were completed, we tested the unit to ensure the air handler was working correctly. We checked the airflow and the temperature of the output to confirm everything was in order.

Results and Customer Satisfaction

After the repair, the Lincoln air handler resumed its efficient operation, blowing warm air evenly throughout the customer’s home. The customer expressed satisfaction, highlighting not only the speed of the intervention but also the high quality of service provided by our skilled team of technicians.

Why Choose AirGreen for Your HVAC Repairs in Montreal, Laval, and Longueuil?

At AirGreen, we are committed to providing responsive, reliable, and high-quality service for all HVAC repairs. Our experienced technicians are trained to work on a wide range of heating and air conditioning systems, including air handlers, heat pumps, water heaters, and other ventilation devices. We also offer energy-efficient solutions and specialize in repairing equipment from renowned brands such as Lincoln, Goodman, Bosch, and more.

High-Quality HVAC Repair Service

We understand the importance of keeping your equipment in perfect working condition, not only to ensure your comfort but also to extend the lifespan of your appliances. Our team uses certified replacement parts and advanced techniques to ensure that your repairs are performed to the highest standards.

Qualified Technicians at Your Service

Our technicians are trained to diagnose and quickly repair any issues with your HVAC systems, whether it's a minor maintenance task or a major repair. On every service call, we are dedicated to delivering exceptional customer service, paying attention to every detail, and explaining each step of the repair process.

The steps

How it goes, from the first call to the end

The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.

Step 1 of 6Your call

The symptoms, since when, the model (on the unit's label) and the error code if there is one.

  1. Your callThe symptoms, since when, the model (on the unit's label) and the error code if there is one.
  2. On-site diagnosisWe look for the cause, not just the symptom: readings, components, installation.
  3. The optionsRepair, part to order or replacement, depending on the failure. We explain what we found.
  4. The workThe repair is done and parts replaced as needed.
  5. TestsThe unit is restarted and checked in its operating modes.
  6. AdviceWhat caused the failure and what can keep it from coming back.
Through the seasons

What to do, season by season

Three habits per season for this unit. They take a few minutes and prevent many calls.

  • Check the indoor module's filter.
  • Clear winter debris from the outdoor unit.
  • Test cooling before the heat arrives.
And at your place?

Which type of equipment for your project?

Pick what looks like your need.

Frequently asked questions

What people ask us about this kind of work

9 questions
What should I have ready before calling?
The model (on the unit's label), the error code if there is one, the symptoms and how long they have lasted.
Repair or replace?
It depends on the unit's age, the failure and the cost of parts. We present the options after the diagnosis.
Can I keep my current ducts?
Often, yes: the central heat pump connects to the existing ducts. We check their condition and size during the estimate.
What happens in extreme cold?
The indoor module (furnace or air handler) works with the central heat pump and takes over in extreme cold.
Furnace, air handler, ducted: what is the difference?
The furnace or air handler is the indoor module of the central system. A ducted system hides in the ceiling: all you see are small supply grilles.
Are there grants?
Depending on the equipment and your situation, assistance programs may apply. AirGreen checks the exact combination before quoting an amount. See the grants.
Do I need a permit?
Rules vary from city to city. See permits and by-laws, and we check for your address.
Does AirGreen hold the required licences?
Yes. AirGreen holds RBQ licence 5645-9605-01, subclasses 15.8 Ventilation, 15.10 Refrigeration and 16 Electricity.
Is the estimate free?
Yes. The on-site estimate is free and the quote follows within 24 hours. Book my free estimate.
Going further

Useful pages for what comes next

Could this job help a neighbour?

Share
Similar projects

More jobs to see, near you

By town, by equipment or by region: browse more than 4,700 published projects.

Each dot: a town where AirGreen has published projects. The glowing dot: this job.

All our projects

Your project

Tell us about your house. We come and see it for free.

The on-site estimate is free and the quote follows within 24 hours.

  • RBQ licence5645-9605-01 · 15.8, 15.10, 16
  • EstimateOn site, free
  • QuoteWithin 24 hours

Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).

Leave a comment