Professional Repair of a FUJITSU Mini Split Heat Pump in Terrebonne
Discover how AirGreen expertly repaired an aging FUJITSU Heat Pump in Terrebonne, restoring its efficiency and saving the customer from costly replacements. Contact us today!
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
Breathing New Life into an Aging FUJITSU Heat Pump
At AirGreen, we take pride in every project, from new installations to extending the life of existing HVAC systems. This recent service call in Terrebonne showcases our commitment to excellence and our ability to deliver results that delight our customers. This repair project involved a FUJITSU Mini Split Heat Pump that had seen better days. Instead of jumping straight to recommending a replacement, we rolled up our sleeves and tackled the issues head-on, breathing new life into this resilient machine.
The Challenge: An Old Machine with a Big Story
When our team arrived at the client’s residence in Terrebonne, we were greeted by a familiar sight: an aging FUJITSU Mini Split Heat Pump that had weathered years of use. The unit was struggling to keep up with the demands of the household, and the customer was at a crossroads—replace or repair?
After a thorough inspection, we identified several issues:
- Clogged coils and filters reducing the system’s efficiency.
- Electrical components that had experienced wear and tear over the years.
- A refrigerant line that needed attention to restore the system’s cooling capabilities.
Instead of recommending an immediate replacement, we assured the customer that with some professional care, this trusted machine could continue serving their home for many more years.
The Solution: A Step-by-Step Approach to Excellence
Our repair process was meticulous, ensuring that every component of the FUJITSU Heat Pump was evaluated and optimized. Here’s how we brought the unit back to life:
1. Cleaning and Maintenance
The first step was to deep clean the unit. Years of dirt and debris had accumulated on the coils and filters, restricting airflow and reducing efficiency. We:
- Removed and thoroughly cleaned the filters.
- Conducted a chemical wash on the coils to restore their heat exchange efficiency.
- Cleared the drainage system to prevent water buildup.
2. Electrical Repairs
Next, we focused on the electrical system. We replaced worn-out components, ensuring the unit could operate safely and efficiently. Our team checked:
- Capacitors and relays for any signs of wear.
- Electrical connections to prevent potential failures.
- The control board to ensure seamless communication within the system.
3. Refrigerant System Adjustment
Finally, we turned our attention to the refrigerant system. After identifying a minor leak in the refrigerant line, we:
- Sealed the leak using high-quality materials.
- Recharged the system with the correct amount of refrigerant.
- Tested the unit to ensure optimal cooling performance.
Why This Repair Was Worth It
Our customer in Terrebonne was thrilled with the results. By choosing to repair rather than replace, they saved significantly on costs while extending the life of their FUJITSU Mini Split Heat Pump. More importantly, the unit now operates with near-new efficiency, providing consistent comfort throughout the home.
This project is a perfect example of why AirGreen is trusted by so many households across Montreal, Laval, Longueuil, the North Shore, and the South Shore. We prioritize our clients’ needs and always strive to find the most cost-effective, reliable solutions.
Key Benefits of Repairing Your Heat Pump
For homeowners with aging heat pumps, repairs can often be the better choice. Here are some reasons why:
- Cost Savings: Repairs are typically more affordable than a full replacement.
- Extended Lifespan: Proper maintenance and targeted repairs can add years to your system’s life.
- Environmental Impact: Repairing rather than replacing reduces waste and is a more sustainable option.
- Restored Efficiency: A well-repaired system can perform almost as efficiently as a new one.
Why Choose AirGreen for Your HVAC Needs?
At AirGreen, we’re more than just an HVAC service provider—we’re your trusted partner in home comfort. Here’s what sets us apart:
- Expert Technicians: Our team is highly trained and experienced with all major HVAC brands, including FUJITSU.
- Transparent Pricing: We provide clear estimates with no hidden fees.
- Commitment to Quality: From minor repairs to major installations, we deliver exceptional results every time.
- Customer-Centric Approach: We listen to your needs and provide tailored solutions.
A Testament to Our Craftsmanship
This Terrebonne project is a testament to our dedication and expertise. By repairing this FUJITSU Mini Split Heat Pump, we not only restored comfort to our client’s home but also reaffirmed our commitment to delivering sustainable, cost-effective solutions. The customer’s satisfaction is our greatest reward, and their glowing feedback motivates us to continue exceeding expectations.
Ready to Extend the Life of Your HVAC System?
Whether you need a repair, maintenance, or a new installation, AirGreen is here to help. Contact us today to schedule a service call and experience the difference of working with a professional, customer-focused HVAC team.
How it goes, from the first call to the end
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
The symptoms, since when, the model (on the unit's label) and the error code if there is one.
We look for the cause, not just the symptom: readings, components, installation.
Repair, part to order or replacement, depending on the failure. We explain what we found.
The repair is done and parts replaced as needed.
The unit is restarted and checked in its operating modes.
What caused the failure and what can keep it from coming back.
- Your callThe symptoms, since when, the model (on the unit's label) and the error code if there is one.
- On-site diagnosisWe look for the cause, not just the symptom: readings, components, installation.
- The optionsRepair, part to order or replacement, depending on the failure. We explain what we found.
- The workThe repair is done and parts replaced as needed.
- TestsThe unit is restarted and checked in its operating modes.
- AdviceWhat caused the failure and what can keep it from coming back.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
Which type of equipment for your project?
Pick what looks like your need.
What people ask us about this kind of work
What should I have ready before calling?
Repair or replace?
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
Useful pages for what comes next
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
Tell us about your house. We come and see it for free.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).