Professional Heat Pump Cleaning Service in Laval: Unveiling the AirGreen Difference
Witness the dramatic transformation of a heavily clogged heat pump in Laval. AirGreen's professional cleaning services ensure optimal performance and fresh, clean air for your home.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
A Thorough Cleaning Experience with AirGreen in Laval: Say Goodbye to Dirt and Dust!
Introduction: The Importance of Regular Heat Pump Maintenance
Maintaining your wall-mounted heat pump (mini-split) is an essential task that often gets overlooked, especially when it's working tirelessly to keep our homes comfortable throughout the year. In Laval, where temperatures can be extreme, the proper functioning of your heat pump ensures you stay warm in the winter and cool in the summer. But what happens when your heat pump is left neglected? Dust, dirt, and allergens begin to accumulate, drastically reducing efficiency and indoor air quality. This is where our professional HVAC cleaning services at AirGreen come into play, and today, we’ll walk you through a recent cleaning job that completely transformed a mini-split unit in Laval.
The Condition: A Heat Pump in Desperate Need of Attention
When we arrived at the customer’s residence in Laval, we were greeted with a heat pump that had clearly endured months, if not years, of heavy use without a proper cleaning. As seen in the picture, the filters and internal components were covered with layers of dirt, dust, and grime, affecting not only the air quality but also the efficiency of the unit. This kind of neglect can lead to higher energy bills, poor heating/cooling performance, and even potential damage to the system over time.
The AirGreen Approach: Cleaning Done Right
Our approach to heat pump cleaning is meticulous and thorough. We follow a detailed step-by-step process to ensure your unit is restored to its optimal condition. Here’s a breakdown of the process we undertook for this particular job in Laval:
1. Comprehensive Inspection
We started by conducting a full inspection of the heat pump. This step is crucial, as it helps us identify any potential issues or damage that might require special attention. In this case, we noticed that the filters were heavily clogged, and there was a significant buildup of dust on the evaporator coil.
2. Deep Cleaning of Filters
The filters are the first line of defense against dust and allergens. Unfortunately, they were almost unrecognizable due to the sheer amount of dirt accumulated over time. We carefully removed the filters and gave them a thorough wash, using a special cleaning solution designed to eliminate even the most stubborn dirt particles. Once cleaned, these filters looked brand new and were ready to provide clean, fresh air once again.
3. Evaporator Coil Cleaning
The evaporator coil plays a crucial role in the cooling process, and any dust or dirt on this component can significantly reduce the efficiency of the heat pump. Using professional-grade cleaning equipment, we meticulously cleaned the coil, ensuring all dust, grime, and potential mold were removed. This step is vital to restore the heat pump’s cooling efficiency and improve indoor air quality.
4. Cleaning the Blower Wheel and Fan
The blower wheel and fan are responsible for circulating air throughout your home, and any dirt buildup can hinder their performance. We carefully cleaned these components, ensuring they were free from dust and debris, allowing for smoother and more efficient airflow.
5. Exterior Cleaning and Final Touches
Lastly, we cleaned the exterior casing of the heat pump, removing any dust and dirt to give it a polished, like-new appearance. We made sure every inch of the unit was spotless, ensuring it not only worked efficiently but also looked great.
The Result: A Transformed Heat Pump
After completing the cleaning process, the transformation was remarkable. The once dirty and inefficient heat pump was now shining and operating at peak performance. The homeowner immediately noticed a difference in air quality and the efficiency of the system. They reported that the unit was quieter and provided a much more consistent temperature throughout their home.
Why Regular Maintenance Is Essential
Regular maintenance and cleaning of your wall-mounted heat pump have numerous benefits, such as:
- Increased Efficiency: A clean heat pump works more efficiently, reducing energy consumption and lowering your electricity bills.
- Extended Lifespan: Proper maintenance can extend the life of your heat pump, saving you money on costly repairs or replacements.
- Improved Air Quality: Clean filters and components mean better air quality, which is especially important for individuals with allergies or respiratory issues.
- Optimal Heating and Cooling: A clean unit provides consistent heating and cooling, ensuring your home stays comfortable all year round.
Why Choose AirGreen for Your Heat Pump Cleaning in Laval?
At AirGreen, we take pride in providing top-quality HVAC maintenance services. Our team is composed of experienced professionals who understand the intricacies of heat pumps and are equipped with the tools and knowledge to clean them effectively. Here’s why you should choose us:
- Experienced Technicians: Our team has years of experience in the industry and knows how to handle all types of heat pumps.
- Quality Cleaning Products: We use only the best cleaning solutions and equipment to ensure your unit is cleaned thoroughly without causing any damage.
- Attention to Detail: We don’t cut corners. Every component is cleaned and inspected to ensure optimal performance.
- Customer Satisfaction: Our job isn’t finished until you’re completely satisfied with the results.
Tips for Maintaining Your Heat Pump Between Professional Cleanings
While we recommend scheduling a professional cleaning at least once a year, here are a few tips to keep your heat pump in good condition between services:
- Clean or replace filters regularly – Depending on usage, clean your filters every 4-6 weeks to prevent dust buildup.
- Keep the exterior unit free from debris – Ensure that the outdoor unit is clear of leaves, dirt, and other debris.
- Monitor for unusual noises or performance issues – If you notice any changes in performance, contact a professional right away.
Conclusion: A Breath of Fresh Air with AirGreen
If you want to enjoy efficient heating and cooling year-round, regular heat pump maintenance is a must. Our recent cleaning job in Laval serves as a perfect example of how a little attention can go a long way in restoring the efficiency and performance of your HVAC system. Don’t let dirt and grime take over your heat pump – give it the care it deserves with AirGreen’s professional cleaning services.
Ready to Give Your Heat Pump the Attention It Deserves? Contact AirGreen Today!
Let us handle the dirty work while you enjoy the benefits of a clean, efficient, and reliable heat pump. Contact us today to schedule your professional heat pump cleaning and experience the AirGreen difference!
How it goes, from the first call to the end
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
The type of unit, its age and what you have noticed: noise, smell, water, lower output.
Filters, coils or core, drain, fans, connections and clearances.
Dirty parts are cleaned following the manufacturer's recommendations.
Operation, water drainage, noise and airflow.
What was done, what to watch and when to come back.
- The appointmentThe type of unit, its age and what you have noticed: noise, smell, water, lower output.
- InspectionFilters, coils or core, drain, fans, connections and clearances.
- CleaningDirty parts are cleaned following the manufacturer's recommendations.
- ChecksOperation, water drainage, noise and airflow.
- The reportWhat was done, what to watch and when to come back.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
Which type of equipment for your project?
Pick what looks like your need.
What people ask us about this kind of work
How often should maintenance be done?
Does maintenance improve performance?
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
Useful pages for what comes next
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
Tell us about your house. We come and see it for free.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).