Heat pumps in Abercorn: permits and bylaws
Planning a heat pump or an air conditioner in Abercorn? Here is what the bylaws say: the permit, the distance from the lot lines, where the unit can go and the noise limit. It all comes from the official texts.
Five spots, one answer for each.
Each answer is the bylaw rule, in short. “Not specified” means the text does not say: ask urban planning.
Allowed in the rear yard, at least 2 m from the property lines.
At least 2 m from the lot lines. A permanent unit in the side setback must be hidden from the street by landscaping.
Not allowed in the front yard.
Not specified in the bylaw: confirm with urban planning.
Allowed on a roof slope other than the one facing the street.
Good to know, and who to call.
Good to know
- In the village core (zones R-04, R-06, R-08, M-01 to M-04, P-02, P-03), some work is subject to the PIIA and council approval.
- The application form has no « heat pump » box: ask before installing.
The short answers.
Do you need a permit to install a heat pump in Abercorn?
Not specified in the bylaw: the municipality says a permit or certificate is always required before work, but heat pumps are not on any list in bylaw 238; confirm with urban planning.
How far from the lot lines must the unit be?
2 m from the property lines.
Can a heat pump go in the front yard?
No. Not allowed in the front yard.
What is the noise limit?
Peace, order and nuisance bylaw 401-2026 (RM 460): no figure for heat pumps (noise that disturbs the peace is prohibited).
Who should I call to confirm before the work?
Urban planning advisor, 450 538-2664, urba@abercorn.ca (by appointment on Tuesdays and Thursdays).
Read at the source.
Sources: Zoning bylaw 234, s. 58 and 68; permits and certificates bylaw 238, s. 18, 37 and 38; bylaw 401-2026 (RM 460), s. 36; Urbanisme page (checked September 30, 2026).
Checked by AirGreen on September 30, 2026.
This page is a summary. The official bylaw prevails. Confirm with the city before the work.
A heat pump project in Abercorn?
We come and see your property, and the estimate is free.
