Commercial dehumidifier: SECARR SDA SDAF-012 from THERMOPLUS AIR

In stock
5.8 lb/h · 2.6 L/h 300 cfm R-410A Light commercial · residential
Price on quoteThe price depends on voltage, options, ductwork and access to the mechanical room.
Licensed contractor · RBQ 5645-9605-01 Free on-site estimate Greater Montréal, Laval, South and North Shore
01 · Your space

What it removes in your conditions

Pick the temperature and humidity of your space. The capacity comes straight from the THERMOPLUS AIR performance table for the SDAF-012.

Moisture removed

In a full day

Source: THERMOPLUS AIR SDA performance table (70 to 90 °F, 40 to 70 % RH). 1 lb of water = 0.4536 L; a US pint of water weighs about 1.043 lb.

02 · Performance

What it removes, in numbers

5.8lb of water per hour at 82 °F and 60 % RH
63litres in 24 h of continuous running
300cfm nominal airflow
88kg (195 lb) to set in place

Its place in the SDA series (lb/h)

Capacity by temperature and humidity (lb/h)

THERMOPLUS AIR SECARR SDA series cutsheet (REV 1), thermoplus.com. Every value checked on November 2, 2026. Capacity at the manufacturer's rating conditions; it changes with the actual temperature and humidity.

03 · Operating cost

What does it cost to run?

Set your schedule. The math uses current Hydro-Québec rates and updates live.

Operating hours per day
Months of use per year
Compressor run time
Electricity rate
THERMOPLUS AIR does not publish input power. This is our estimate from the cutsheet: compressor rated load 5.6 A at 208-230 V · 1-phase × 0.85 power factor, plus the blower. It is a cautious ceiling; enter the kW from your spec sheet if you have it.
Electricity per year
Per month
Per operating hour
Energy
Water removed (max.)
Cost per litre removed
Ceiling: 24 h at 100 %

Method: kW × hours/day × 30.4 days × run time × months. Rate G: 12.388 ¢/kWh up to 15,090 kWh a month, 9.534 ¢ after. Rate M: 6.292 ¢/kWh up to 210,000 kWh, 4.666 ¢ after (demand charge not included). Rate D: 7.065 ¢/kWh for the first 40 kWh a day, 11.142 ¢ after. Hydro-Québec rates in force since April 1, 2026, before tax; access fees and demand charges excluded. Water removed uses the rated capacity, so it is a maximum. Indicative estimate.

04 · Why the SDAF-012

The most compact SECARR, and it runs on 120 V

120 V

Offered on 115-120 V single-phase

Minimum circuit ampacity of 11 A at 120 V, 9 A at 208-230 V. Only the SDAF-012 and 016 offer 120 V.

18 in

A low 195-lb cabinet

29 × 30 × 18 in: it fits in a crawl space or above a suspended ceiling.

133

Pints a day at 82 °F, 60 % RH

5.8 lb/h per the cutsheet, about 63 litres a day running continuously.

P-SDA

Optional portable kit

The portable version moves from room to room, handy for temporary drying.

Pick it if: the space is small, you only have a 120-V circuit, or the unit must hide in a low space.
05 · Compare

Against the other models in the series

Pick a model: the differences are computed against the SDAF-012.

SDAF-012Difference

06 · Installation

Will it fit through your doors?

Pick the clear width of your narrowest passage. We compare it with the narrow side of the SDAF-012 (29 × 30 × 18 in).

Power supplyBlowerCompressor RLA / LRAMCAMOP
115-120 V · 1-phase0.17 kW · 2 A7.5 / 73 A11 A15 A
208-230 V · 1-phase0.17 kW · 1.6 A5.6 / 29 A9 A15 A
On site: a condensate drain, supply and return ducts sized for 0.5 in of static pressure, access to the filter, and a 24 V control wire to the humidistat. Electrical work is done under the same licence (RBQ subclass 16).
07 · Options

Build your configuration

Tick what matters to you, then send the list with your quote request. Every option comes from the THERMOPLUS AIR cutsheet.

08 · Your project

From site visit to start-up

On-site estimate, freeRoom size, moisture sources, ducting route and electrical service.
Model selectionWe confirm the right model in the series, the voltage and the options.
Detailed quoteUnit, options, ductwork, electrical and handling, line by line.
InstallationAirGreen refrigeration technicians and electricians, RBQ licence 5645-9605-01.
Start-upSettings, humidity set point and a walkthrough of the controls with your team.
09 · FAQ

Questions we hear often

What spaces is the SDA series built for?

THERMOPLUS AIR describes it as a compact dehumidifier for light commercial and residential use: basements, storage rooms, mechanical rooms, archives and other spaces where humidity must stay low.

Can it be ducted?

Yes. The EC plenum fan is rated at 0.5 in of external static pressure, and the supply can leave from the top or the side per the cutsheet.

Why does capacity change with temperature?

Warmer, more humid air holds more water to remove. The THERMOPLUS AIR cutsheet gives capacity from 70 to 90 °F and 40 to 70 % RH; the explorer above uses that table.

How do I know the SDAF-012 is big enough?

With a needs assessment: room volume, infiltration, moisture sources and target humidity. We do it during the on-site estimate.

Why is there no price shown?

The price depends on voltage, options, ductwork, handling and access to the mechanical room. We price it after the on-site estimate, which is free.

Full specifications
Model
SECARR SDAF-012
Moisture removal
5.8 lb/h (2.6 L/h) at 82 °F, 60 % RH
Sensible / total cooling
7,600 / 14,100 BTU/h at 82 °F, 60 % RH
Nominal airflow
300 cfm, 0.5 in external static pressure
Compressor
Rotary
Reheat
Full (standard)
Refrigerant
R-410A, 3.5 lb
Filter
MERV 8, 16 × 16 × 2 in
Dimensions (L × W × H)
29 × 30 × 18 in
Weight
195 lb (88 kg)
Fan
EC plenum
Casing
Pre-painted G90 galvanized steel, 1/2 in insulation
Coils
Epoxy fins

THERMOPLUS AIR SECARR SDA series cutsheet (REV 1), thermoplus.com. Every value checked on November 2, 2026.

AirGreen

Humidity under control, all year

Free on-site estimate. Refrigeration and electrical work under one licence, RBQ 5645-9605-01.

SECARR SDA SDAF-012 by THERMOPLUS AIR: Comprehensive Product Description

Welcome to the extensive product description of the SECARR SDA SDAF-012, one of the commercial dehumidifiers offered by AirGreen, a Montréal HVAC company. A crucial asset for maintaining an ideal indoor environment, this unit is suitable for light commercial and residential dehumidification applications, making it perfect for a variety of spaces including greenhouses, restaurants, warehouses, and storage facilities.

Compact Powerhouse

The SECARR SDA SDAF-012, though compact, is a powerful and versatile dehumidifier with a capacity of 5.8 lb/h at 82 °F and 60 % RH. This product is more than just a dehumidifier; it is a comprehensive indoor packaged R-410A dehumidification unit, complete with optional air or water-cooled air conditioning functionality.

Key Features

This device boasts several essential standard features that streamline its operation:

• EC Plenum Fan Motor: This efficient and quiet fan motor ensures effective air circulation.

• 24V Terminal Strip: The terminal strip allows easy thermostat connection.

• Refrigerant High and Low Pressure Cut-Out Switches: These safety features protect the system from pressure abnormalities.

• Access Ports: The dehumidifier includes access ports on the high and low sides for convenient pressure checks.

• Thermostatic Expansion Valve: This feature regulates the flow of refrigerant into the evaporator, aiding in the unit's cooling function.

• Compressor: The unit features a robust rotary compressor (for models 012 and 016) or a scroll compressor (for models 024 to 060) for efficient humidity control.

• Epoxy Fin Coils: These coils increase heat transfer efficiency and ensure corrosion resistance.

• Pre-Painted G90 Galvanized Casing with 1/2" Insulation: The casing is built to withstand challenging conditions, while the insulation optimizes energy efficiency.

• 2" MERV 8 Filter: This quality air filter effectively removes airborne particulates, promoting cleaner, healthier air.

• Full Reheat: This capability allows the unit to warm up the conditioned air, helping to maintain a comfortable temperature in the serviced area.

Operating Range

The SECARR SDA SDAF-012 operates within a specific range to ensure optimal performance:

• Entering Air Temperature: The sheet publishes capacity from 70 to 90 °F and 40 to 70 % RH.

• Relative Humidity: The dehumidifier functions effectively within a relative humidity range of 40% to 70%.

• ESP - Direct Drive: The External Static Pressure (ESP) can be adjusted up to 0.5", which influences the unit's airflow.

Customizable Options

The SECARR SDA SDAF-012 also offers a variety of optional features for enhanced performance and adaptability:

• Multi-Discharge Options: These provide greater flexibility for the installation and use of the unit.

• Aqua Aero Coated Coils: This option offers enhanced corrosion resistance and performance.

• Copper Fin Coils: An upgrade for improved heat transfer efficiency.

• Non-Fused Disconnect: This safety feature allows for an easy way to disconnect power to the unit.

• Partial Reheat: An option for spaces that require less heat.

• Air or Water-Cooled Option: This option lets you choose between air or water-cooled air conditioning, depending on your needs.

• Remote Air-Cooled Condenser: This accessory allows the unit to reject heat outdoors, improving efficiency.

• Merv11 or 13 Filters: Higher MERV rating filters for improved air quality are available.

• Humidistat/Thermostat: These controls allow for easy adjustment of humidity and temperature.

• DDC Controls with BACnet: This advanced control option facilitates integration with building management systems.

• Portable Kit (for models 012 and 016 only): This provides flexibility for spaces with changing needs.

Durable Design

The SECARR SDA SDAF-012 is a compact dehumidifier, designed for light commercial and residential dehumidification. Measuring at 29" x 30" x 18", the unit weighs 195 lbs, making it a space-saving solution for your humidity control needs. The unit is also charged with 3.5 lbs of R-410A refrigerant.

Standard Features in Detail

The SECARR SDA SDAF-012 comes with an array of standard features designed to optimize its operation and ensure ease of use:

• Full Reheat Coil: This feature recaptures the heat that is generated during the dehumidification process and uses it to reheat the air, ensuring a more comfortable indoor climate.

• Rotary Compressor: This efficient compressor type is known for its quiet operation and excellent performance in controlling humidity levels.

• EC Plenum Fan: This fan design ensures optimal air movement throughout your space, contributing to even temperature and humidity levels.

• 24V Terminal Strip: This allows for easy integration with existing thermostat systems, giving you control over the operation of your dehumidifier.

• High and Low Pressure Switch: These safety features cut off the compressor when the refrigerant pressure gets too high or drops too low, protecting the unit from damage.

• High and Low Pressure Access Ports: These ports allow for easy access to measure refrigerant pressure, facilitating regular maintenance and troubleshooting.

• Thermostatic Expansion Valve: This feature regulates the flow of refrigerant into the evaporator, helping the dehumidifier cool the air efficiently.

• Epoxy Fin Coils: These coils ensure efficient heat transfer while also providing excellent resistance to corrosion.

• Pre-painted G90 Galvanized Casing with 1/2" Insulation: The casing is designed for durability, while the insulation helps maintain energy efficiency.

• 2" MERV 8 Filter: This high-quality filter removes particulates from the air before it circulates back into your space, contributing to a cleaner and healthier indoor environment.

Optional Features in Detail

The SECARR SDA SDAF-012 also comes with a range of optional features that enhance its functionality and make it adaptable to different situations:

• Aqua Aero Coated Coils: These coated coils offer better performance and increased resistance to corrosion, ensuring long-term reliability of the unit.

• Copper Fin Coils: These optional coils can further improve heat transfer efficiency, enhancing the performance of the dehumidifier.

• Non-Fused Disconnect: This option provides an additional layer of safety, allowing for easy power disconnection when needed.

• Humidistat/Thermostat: These controls give you precise command over the humidity and temperature in your space, letting you create the ideal indoor climate.

• Digital Controls with BACnet: These advanced controls can connect to building management systems, allowing for easy monitoring and control of the dehumidifier along with other building services.

• 2" MERV 11 or 13 Filters: These optional higher-MERV filters can capture even smaller particles, improving air quality even further.

• Portable Kit Option: Available for models 012 and 016, this kit allows you to move the dehumidifier easily between different spaces as your needs change.

Comprehensive Indoor Environment Control

The SECARR SDA SDAF-012 isn’t just a dehumidifier—it's a complete solution for indoor environment air quality control. It's specifically designed for indoor installation; the sheet requires ETL or CSA listing, and it complies with BOCA codes M-401 and M-402.1. The packaged system includes dehumidification, air heating/cooling, and a host of advanced features.

In conclusion, the SECARR SDA SDAF-012 by THERMOPLUS AIR is a versatile and high-performing commercial dehumidification solution. It is designed to provide optimal indoor air quality, ensuring a comfortable and healthy environment for all.

Sold and installed by AirGreen. Montréal, Laval, Longueuil, the South Shore and the North Shore. Manufacturer sheet: THERMOPLUS AIR SECARR SDA sheet (PDF).