Commercial dehumidifier: SECARR SDS SDS-103H from THERMOPLUS AIR
How THERMOPLUS AIR selects an SDS for a pool
THERMOPLUS AIR sizes a pool dehumidifier with its own request form: enclosure volume, desired air changes (4, 6 or 8 per hour), area and water temperature of each pool, pool type, spectators, active hours, glass and skylights, altitude, outdoor air and power supply. AirGreen fills in that form with you on site.
For reference, the SECARR SDS sheet gives 50.3 lb/h for the SDS-103H at 82 °F and 60 % RH.
What it removes, in numbers
Its place in the horizontal SDS series (lb/h)
THERMOPLUS AIR SECARR SDS pool series cutsheet (REV 1, SDS-STD 2019 specification), thermoplus.com. Every value checked on November 2, 2026. Capacity at the manufacturer's rating conditions; it changes with the actual temperature and humidity.
What does it cost to run?
Set your schedule. The math uses current Hydro-Québec rates and updates live.
Method: kW × hours/day × 30.4 days × run time × months. Rate G: 12.388 ¢/kWh up to 15,090 kWh a month, 9.534 ¢ after. Rate M: 6.292 ¢/kWh up to 210,000 kWh, 4.666 ¢ after (demand charge not included). Rate D: 7.065 ¢/kWh for the first 40 kWh a day, 11.142 ¢ after. Hydro-Québec rates in force since April 1, 2026, before tax; access fees and demand charges excluded. Water removed uses the rated capacity, so it is a maximum. Indicative estimate.
Horizontal version of the SDS-103, 50.3 lb/h
Of residential pool, as a guide
With the ASHRAE evaporation equation (water 82 °F, air 84 °F, 55 % RH, activity factor 0.5), its 50.3 lb/h cover about 2,210 sq ft of pool. In a hotel (0.8): about 1,380 sq ft.
More than the SDS-090H
50.3 lb/h vs 42.6 lb/h at 82 °F and 60 % RH.
Total height
The horizontal version measures 84 × 64 × 57 in: it slides under a low ceiling, where the SDS-103V stands 82 in tall.
BTU/h of total cooling
At 82 °F and 60 % RH, of which 64,790 BTU/h sensible. Three-phase only: 49 A at 208-230 V, 26 A at 460 V.
Against the other models in the series
Pick a model: the differences are computed against the SDS-103H.
| SDS-103H | Difference |
|---|
Will it fit through your doors?
Pick the clear width of your narrowest passage. We compare it with the narrow side of the SDS-103H (84 × 64 × 57 in).
| Power supply | Blower | Compressor RLA / LRA | MCA | MOP |
|---|---|---|---|---|
| 208-230 V · 3-phase | 3.6 kW · 10.6 A | 30.1 / 225 A | 49 A | 80 A |
| 460 V · 3-phase | 3.5 kW · 4.7 A | 16.7 / 114 A | 26 A | 40 A |
| 575 V · 3-phase | 3.6 kW · 3.9 A | 12.2 / 80 A | 20 A | 30 A |
Build your configuration
Tick what matters to you, then send the list with your quote request. Every option comes from the THERMOPLUS AIR cutsheet.
From site visit to start-up
Questions we hear often
Why does an indoor pool need a dehumidifier?
Pool water evaporates all the time. Without dehumidification, moisture condenses on windows and inside walls, rusts structures and makes the air heavy. The dehumidifier pulls that water out of the air and keeps humidity steady.
Where does the heat taken from the air go?
It is recovered. The SDS series has a double-wall cupro-nickel coaxial condenser that can heat the pool water, and a reheat coil that returns heat to the air. With the air-conditioning option, the surplus is rejected outdoors.
Horizontal or vertical?
Both have the same capacity and the same electrical data. This model is the horizontal version. The choice depends on the mechanical room: the horizontal fits under a low ceiling, the vertical takes less floor space.
How do I know the SDS-103H is big enough?
With the THERMOPLUS AIR selection form: enclosure volume, air changes, water area and temperature, pool type, spectators and active hours. AirGreen fills it in with you during the on-site estimate.
What is not included with the unit?
Per the cutsheet: the filter holder, the supply duct connection and the outdoor air intake connection. Allow about 12 in for the filter rack, 1.5 in for the supply connection and 6 in for the outdoor air intake.
Why is there no price shown?
The price depends on voltage, options, ductwork, handling and access to the mechanical room. We price it after the on-site estimate, which is free.
Full specifications
- Model
- SECARR SDS-103H
- Configuration
- Horizontal discharge
- Moisture removal
- 50.3 lb/h (22.8 L/h) at 82 °F, 60 % RH
- Total / sensible cooling
- 121,200 / 64,790 BTU/h at 82 °F, 60 % RH
- With outdoor condenser (option)
- 72,760 BTU/h sensible at 80 °F, 50 % RH; max. rejection 148,560 BTU/h
- Condenser lines
- Hot gas 1-1/8 in, liquid 3/4 in, 50 ft max.
- Maximum airflow
- 4,800 cfm, 1 in external static pressure
- Refrigerant
- R-410A, 25.5 lb
- Filter
- MERV 8, 6 filters, 16 × 25 × 2 in
- Dimensions (L × W × H)
- 84 × 64 × 57 in
- Weight
- 1,750 lb (794 kg), without options
- Fan
- EC plenum, IP54, IE4, 0-10 V speed
- Compressor
- Scroll on isolators
- Pool water heater
- Double-wall coaxial, cupro-nickel
- Drain
- 1 1/2 in, sink type
- Control
- Programmable DDC, Ethernet, BACnet
THERMOPLUS AIR SECARR SDS pool series cutsheet (REV 1, SDS-STD 2019 specification), thermoplus.com. Every value checked on November 2, 2026.
A pool room that stays dry
Free on-site estimate. Refrigeration and electrical work under one licence, RBQ 5645-9605-01.
AirGreen presents the SECARR SDS SDS-103H by THERMOPLUS AIR: A Commercial Dehumidifier for Natatoriums
At AirGreen, we understand the challenges that natatoriums - spaces where indoor pools are located - face in maintaining optimal air conditions. High humidity and temperature fluctuation can cause discomfort and structural damage. To address these concerns, we proudly introduce the SECARR SDS SDS-103H by THERMOPLUS AIR, a natatorium dehumidifier designed to ensure a comfortable and healthy indoor environment for commercial applications.
Overview
The SECARR SDS SDS-103H is a powerful dehumidifier, with a moisture removal capacity (MRC) of 50.3 lb/h at 82 °F and 60 % RH, and a total cooling capacity of 121,200 BTU/H. Operating within an air temperature range of 70°F through 100°F DB, and a relative humidity range of 40% to 70%, it provides the versatility to meet a broad array of commercial needs.
Structure and Configuration
Housed in a robust, pre-painted G90 galvanized casing with 1/2" insulation, the SDS-103H is the horizontal version; the series also comes in a vertical version (SDS-103V). The structure's dimensions are 84" (length) x 64" (width) x 57" (height), weighing in at 1750 lbs.
Performance and Efficiency
The unit's IE4 EC plenum fan motor, whose speed is controlled by a 0-10 V signal, ensures efficient air distribution. The device utilizes refrigerant R410A for cooling, with a refrigerant charge of 25.5 lbs. The unit has high and low pressure cut-out switches and access ports on both sides to facilitate regular maintenance. It also has a 2" MERV 8 filter.
Key Features
- DDC controls: These advanced controls make the unit highly responsive and easy to manage.
- Aqua Aero coated coils: The application of Aqua Aero coating provides protection against corrosion, ensuring longevity and high performance.
- Cupro-nickel co-axial pool water condenser: This feature enables optimal heat transfer, contributing to the unit's energy efficiency.
Optional Add-Ons
To customize the dehumidifier according to your unique needs, it comes with an array of optional features. These include:
- Multiple discharge options for greater flexibility
- A non-fused disconnect feature for safety
- A forward curve belt-driven fan for enhanced performance
- A 4-year extended compressor warranty for peace of mind
- BACnet card for integration into existing Building Management Systems
- Compressor sound cover for noise reduction
- Air or water-cooled option for versatility
- A remote air-cooled condenser for added convenience
Unique Specifications for Natatorium Environments
The SDS-103H is specifically designed to cater to the needs of natatoriums. This includes dehumidification, pool water heating, air heating/cooling, and more. Its packaged system allows for easy indoor installation. On safety and performance, the sheet requires ETL or CSA listing, and the unit complies with BOCA codes M-401 and M-402.1.
The unit includes components like a compressor, evaporator coil, air reheat coil, supply air blower with motor, pool water condenser, receiver, and expansion valves. The pipework complies with BOCA code P-308-2 for corrosion resistance, while a UL or CSA listed water heater ensures maximum heat transfer from refrigerant to pool water. The evaporator and condenser (air reheat coil) are also UL or ETL listed and tested for maximum moisture removal capacity and heat transfer.
A built-in control panel in a separate compartment ensures minimal air flow disturbance during servicing. The unit is insulated with 1/2 inch thick fiberglass duct liner and includes a 2” MERV 8 disposable air filter suitable for commercial applications. A fully programmable solid-state microprocessor control with integrated ethernet interfaces BACnet communication protocol ensures efficient monitoring and control.
An optional air conditioning feature is available that rejects heat to an outdoor air-cooled condenser. The unit also comes with a dry contact rated for 24VAC/5A to operate the remote outdoor condenser control.
Conclusion
The SECARR SDS SDS-103H by THERMOPLUS AIR offers dehumidification performance coupled with features specific to natatoriums. It offers flexibility and customization to cater to your specific requirements. Invest in the SDS-103H to ensure a comfortable, healthy, and moisture-free indoor environment for your commercial space.
Sold and installed by AirGreen. Montréal, Laval, Longueuil, the South Shore and the North Shore. Manufacturer sheet: THERMOPLUS AIR SECARR SDS sheet (PDF).
