Interface Module HONEYWELL RF THM5320R1000/U | Montreal, Laval, Longueuil, South Shore & North Shore
Moving a thermostat, or replacing a furnace with a more advanced unit, often runs into a very concrete constraint: the wire connecting the thermostat to the equipment.
Quick facts
Moving a thermostat, or replacing a furnace with a more advanced unit, often runs into a very concrete constraint: the wire connecting the thermostat to the equipment. It is too short, it lacks conductors, or it runs through a wall you don't want to open. The Honeywell RF THM5320R1000/U equipment interface module gets around this constraint: it installs near the HVAC unit and communicates wirelessly with the thermostat over RedLINK.
A module dedicated to wireless FocusPRO thermostats
This module has a very specific use: it works only with the wireless FocusPRO TH6320R1004 and TH5320R1002 thermostats. One of these thermostats is required to use it, and the module is sold on its own. It does not pair with other RedLINK thermostats or with RedLINK 3.0 products. If you already have one of these wireless FocusPRO thermostats, or if we are replacing a module for one, this is the part you need; for a new project, we will recommend the combination best suited to your equipment.
What the module makes possible
The module lets you move the thermostat or upgrade the equipment without running new wires. The thermostat can then be placed in the room where the temperature reading is most representative, rather than where the old wire used to run. The module handles up to 3 heating and 2 cooling stages on a heat pump, or 2 heating and 2 cooling stages in conventional mode. It is suitable for gas, oil, electric, heat pump, forced-air, hot water, steam and gravity systems.
Designed for the installer
Quick-connect terminal blocks make it easier to connect to the equipment, and LED indicators show power and system status, which simplifies commissioning and diagnostics. A return air sensor input lets you add a reading in the return duct when the configuration calls for it.
Installation by AirGreen
The module is powered by 18 to 30 VAC, 50/60 Hz, from the equipment. Our technicians:
- check that your thermostat is a wireless FocusPRO TH6320R1004 or TH5320R1002;
- mount the module near the furnace, heat pump or boiler;
- connect the equipment to the terminal blocks;
- pair the thermostat with the module over RedLINK;
- check each heating and cooling stage using the indicator lights.
The grey 206 x 203 x 47 mm housing mounts on a wall in the mechanical room.
The module is also useful during renovations: a wall is moved, a room is enlarged, and the old thermostat location disappears. With the wireless link, the FocusPRO thermostat can be reinstalled elsewhere without running a new wire to the equipment.
Comfort and savings in winter
A thermostat in the right place regulates better. If it was on a cold wall or near a door, it ran the equipment longer than necessary. With the module, it can be installed in a living area, and the house is heated according to the temperature you actually feel. During a Québec winter, this simple move can noticeably improve comfort.
Maintenance
The module needs no special maintenance. During the annual equipment visit, we check the indicator lights and the communication with the thermostat.
Technical specifications
- Type: wireless equipment interface module
- Stages: up to 3 heating / 2 cooling on a heat pump; 2 heating / 2 cooling conventional
- Systems: gas, oil, electric, heat pump, forced air, hot water, steam, gravity
- Communication: RedLINK wireless
- Power: 18 to 30 VAC, 50/60 Hz
- Inputs: return air sensor
- Connections: quick-connect terminal blocks
- Indicators: power and system status LEDs
- Dimensions: 206 x 203 x 47 mm (8.125 x 8 x 1.875 in.)
- Colour: grey
- Contents: module only
- Compatibility: wireless FocusPRO TH6320R1004 / TH5320R1002 thermostats (required)
Why AirGreen
A family-owned HVAC business holding an RBQ licence, AirGreen has been installing and servicing heating and cooling systems in the Montréal area for more than 15 years. Our showroom is located in Boucherville.
For the purchase and installation of the Honeywell RF THM5320R1000/U module, contact AirGreen. We serve Montréal, Laval, Longueuil, the North Shore and the South Shore.
Key facts: HONEYWELL RF THM5320R1000/U
Four things to know, then its ID card in twelve answers. “—” means the manufacturer does not publish it.
The HONEYWELL RF THM5320R1000/U or its closest sibling?
The most useful comparison: the model right next to it in our catalogue.
Products that go with the HONEYWELL RF THM5320R1000/U
Parts named in its spec sheet that we sell and install.
Installed and set up by our technicians, in five steps
What we do at your place, in order. The on-site estimate is free.
- 01CompatibilityExisting system and thermostat checked before ordering.
- 02MountingInstalled in the most representative spot.
- 03ConnectionWiring or wireless pairing, depending on the model.
- 04SettingsSet-up in the thermostat or the app.
- 05TestOperation checked with you.
HONEYWELL RF THM5320R1000/U specifications
From the manufacturer’s sheet. Type a word: the list filters as you write.
No line matches. Try another word.
Frequently asked questions about the HONEYWELL RF THM5320R1000/U
Short answers, no detours.
What does the HONEYWELL RF THM5320R1000/U work with?
According to the manufacturer’s sheet: gas, oil, electric, heat pump, forced air, hot water, steam, gravity.
What is the warranty?
1 year, per the manufacturer’s information.
Does AirGreen install it?
Yes. We sell and install this product in Montréal, Laval, Longueuil, the South Shore and the North Shore. The on-site estimate is free.
No question matches. Call us at 514 316-2973.
Your thermostat, installed and set up by our technicians
We check your system and wiring, install the thermostat, connect it and program it with you. One visit, one installed price.


