Floor Heating Secondary Module HONEYWELL CT230-GA/U | Montreal, Laval, Longueuil, South Shore & North Shore
A floor heating thermostat controls a maximum of 15 A.
Quick facts
A floor heating thermostat controls a maximum of 15 A. For a large kitchen, a finished basement or an open-concept area, the heating element may need more. The Honeywell CT230-GA/U, from the Aube line, handles this situation. It's not a thermostat but a secondary module that works under the direction of a TH114-AF or TH115-AF main thermostat in the 12 VDC version. The floor is divided into linked zones: the main thermostat controls its own zone and passes its setpoints to the modules, which each control their own. The occupant sees only one control, and the whole floor heats in a coordinated way.
Extending floor heating beyond 15 A
The CT230-GA/U controls one electric floor heating zone at 120 V or 240 V, with a maximum load of 15 A resistive, or 3,600 W at 240 V or 1,800 W at 120 V. Up to 10 modules can be linked in a single installation, each one able to control 15 A. The main thermostat keeps the settings and programming for the entire floor.
No dial, installable anywhere
The module has no adjustment dial, since all the setpoints come from the main thermostat. It can therefore be installed wherever is most practical for the wiring, without worrying about access for the occupants. An ON/STANDBY switch still lets you put its zone to rest independently, for example during work in part of the room.
Built-in protection
Each CT230-GA/U has its own built-in ground fault protection (GFCI/EGFPD) with a test light. No separate safety cutoff is therefore required for its zone. It carries CSA approval.
Technical specifications
- Function: secondary module (linked zone) for electric floor heating over 15 A
- Voltage: 120 VAC or 240 VAC, 60 Hz
- Maximum load per module: 15 A resistive (3,600 W at 240 V, 1,800 W at 120 V)
- Up to 10 CT230 modules per installation
- Compatible with Aube TH114-AF / TH115-AF main thermostats operating at 12 VDC
- No adjustment dial; test light
- ON/STANDBY switch to put the zone to rest independently
- Built-in ground fault protection (GFCI/EGFPD) with test light
- 6 in. tinned copper connection leads
- CSA approval
- Dimensions: 122 x 70 x 23 mm (4.9 x 2.8 x 0.9 in.)
- Colour: white
Installation and wiring
Each CT230-GA/U module connects to line voltage and to its own portion of the heating element, using 6 in. tinned copper leads. It is linked to the main thermostat, which operates at 12 VDC. Our technicians first plan how the load is split: each zone must not exceed 15 A, or 3,600 W at 240 V or 1,800 W at 120 V. They then shut off the power, verify that no voltage is present, connect the module and the main thermostat, and test each zone individually, including the built-in protection using the TEST button.
What projects it's for
The CT230-GA/U is the answer as soon as the total power of a floor heating system exceeds what one thermostat can control on its own. Typical cases are large kitchens, open-concept areas, finished basements and some commercial spaces. Our advisors calculate the power of the planned heating element and determine how many modules are needed. They also check the compatibility of the chosen main thermostat; in our selection, the TH115-AF-GB/U is listed as compatible with the CT230-GA/U.
Secondary module or second thermostat
You could split a large floor into two circuits controlled by two independent thermostats. The result would be less practical, though: two setpoints to adjust, two schedules to manage and zones that don't always heat at the same pace. With the CT230-GA/U, a single control manages the entire floor, and the main thermostat's programming applies to every zone. It's simpler for the occupant, and the floor heats evenly.
Maintenance and checks
The module needs no routine maintenance. The built-in protection of each module should still be checked periodically using the TEST button. If one zone stays cold while the others heat, first check the position of the ON/STANDBY switch on the corresponding module. If the protection trips, don't keep resetting it: shut off the circuit and contact us to have the heating element checked.
An installation designed for your home
We don't sell a thermostat the way you'd sell a box off a shelf. Every AirGreen recommendation starts from your actual installation: type of equipment, voltage, number of conductors, location of the wall box and your family's habits. As a Montréal family HVAC business active for more than 15 years and holding an RBQ licence, we serve Montréal, Laval, Longueuil, the North Shore and the South Shore. Our technicians arrive with the tools needed to check the circuit, mount the control level, run operating tests and show you the settings that matter. You're left with a clean installation and a thermostat you know how to use. To see the products up close, our Boucherville showroom is open to you.
Call on AirGreen for the sale and professional installation of this model in Montréal, Laval, Longueuil, the North Shore and the South Shore. Tell us what type of equipment needs to be controlled and how many rooms are involved, and we'll suggest a clear solution, installed by our own technicians.
Key facts: HONEYWELL CT230-GA/U
Four things to know, then its ID card in twelve answers. “—” means the manufacturer does not publish it.
The HONEYWELL CT230-GA/U or its closest sibling?
The most useful comparison: the model right next to it in our catalogue.
Products that go with the HONEYWELL CT230-GA/U
Parts named in its spec sheet that we sell and install.
Installed and set up by our technicians, in five steps
What we do at your place, in order. The on-site estimate is free.
- 01CompatibilityExisting system and thermostat checked before ordering.
- 02MountingInstalled in the most representative spot.
- 03ConnectionWiring or wireless pairing, depending on the model.
- 04SettingsSet-up in the thermostat or the app.
- 05TestOperation checked with you.
HONEYWELL CT230-GA/U specifications
From the manufacturer’s sheet. Type a word: the list filters as you write.
No line matches. Try another word.
Frequently asked questions about the HONEYWELL CT230-GA/U
Short answers, no detours.
What is the warranty?
3 years, per the manufacturer’s information.
Does AirGreen install it?
Yes. We sell and install this product in Montréal, Laval, Longueuil, the South Shore and the North Shore. The on-site estimate is free.
No question matches. Call us at 514 316-2973.
Your thermostat, installed and set up by our technicians
We check your system and wiring, install the thermostat, connect it and program it with you. One visit, one installed price.

