Zoning Panel HONEYWELL TrueZONE HZ311/U | Montreal, Laval, Longueuil, South Shore & North Shore
A gas or electric furnace paired with a central air conditioner, a finished basement, a ground floor and an upper floor: that is the setup of thousands of homes in the region.
Quick facts
A gas or electric furnace paired with a central air conditioner, a finished basement, a ground floor and an upper floor: that is the setup of thousands of homes in the region. The Honeywell TrueZONE HZ311/U lets you divide this type of system into up to three zones, each with its own thermostat. It's designed for single-stage conventional systems, meaning one heating stage and one cooling stage, with no heat pump.
This point matters: the HZ311 is not compatible with a heat pump. If your home has a central heat pump or you plan to add one, we'll steer you toward the HZ221, HZ322 or HZ432 in the same family.
Three zones on a furnace and an air conditioner
Zoning relies on motorized dampers installed in the ducts. Each zone has its own 24 V thermostat. When the basement calls for heat and the upper floor is satisfied, the panel opens the basement damper, closes the dampers for the other zones and starts the furnace. In summer, it's often the upper floor that calls for cooling, so the panel sends the cool air to the bedrooms. Automatic changeover handles the switch between heating and cooling based on the zones' calls.
The panel also handles fan control by zone, so a single zone can call for air circulation, and it supports variable-speed fan control when the equipment allows it.
Equipment protection
When only one small zone is open, the furnace can end up with less airflow than it needs. The HZ311 has a built-in fixed 160 °F high limit and an input for a discharge air temperature sensor. The C7735A sensor, supplied with the HZ311K/U kit (which also includes a transformer), measures the air leaving the equipment and lets the panel react if the temperature exceeds the limit. The panel alone doesn't include the sensor, so we add it during installation.
A TrueZONE bypass damper usually rounds out the system. It sends excess air back to the return when few zones are open, which limits noise at the grilles and protects the equipment.
Designed for the technician and for you
Heavy-duty pressure terminals provide reliable connections for the thermostats, dampers and furnace. LED indicators show at a glance which zone is calling and which output is active, which makes service visits faster. The panel's compact size allows a clean installation near the equipment, and the resettable fuse saves you from replacing a fuse after a short circuit on the 24 V circuit.
A well-run zoning project
Before recommending the HZ311, we look at your home: the duct network, the furnace location, the position of the grilles and how the rooms are used. Effective zoning requires logical zones, often by floor, and ducts that can deliver the airflow each one needs.
Our approach includes:
- making sure the equipment is indeed conventional, with one heating stage and one cooling stage;
- dividing the house into two or three zones;
- choosing and installing the zone dampers and the bypass damper;
- installing the 24 V zone thermostats in the right spots;
- commissioning and checking each zone in heating and cooling.
Energy savings in winter and summer
Without zoning, the main thermostat decides for the whole house. The basement can stay cold, the bedrooms too warm, and the furnace runs based on a single room. With three zones, each floor is heated according to how it's used: the basement at a moderate temperature when nobody's there, the bedrooms cooler during the day, the living areas comfortable in the evening. During the Québec winter, this distribution cuts down on unnecessary furnace run time. In summer, cooling is concentrated on the upper floor, where the heat builds up.
You also gain comfort: less difference between floors, fewer manual grille adjustments and a house that better follows everyone's routine.
Choosing between TrueZONE panels
The HZ311 is the most straightforward panel in the family for a single-stage conventional system. The HZ322 accepts up to two heating and two cooling stages and heat pumps, and has a digital installer display. The HZ432 goes further with up to four expandable zones and dual energy management. For a single-stage furnace and air conditioner, the HZ311 offers everything you need without unnecessary complexity.
Maintenance
The panel itself needs no maintenance. During the annual maintenance of the furnace and air conditioner, we check the operation of the dampers, the discharge air sensor reading and the bypass setting. Change your filter regularly: adequate airflow is essential for a zoned system to work properly.
Technical specifications
- Type: zoning panel for conventional forced-air systems
- Zones: up to 3
- Stages: 1 heating / 1 cooling (conventional, single-stage)
- Compatibility: not compatible with heat pumps
- Power: 24 VAC
- Display: LED status and diagnostic indicators
- Features: automatic changeover, fan control by zone, variable-speed fan control, resettable fuse
- High limit: fixed, 160 °F
- Sensor input: discharge air temperature sensor (C7735A, included in the HZ311K/U kit)
- Wiring: pressure terminals
- Compatible thermostats: any 24 V zone thermostat
- Compatible accessories: TrueZONE bypass dampers
- Contents: panel only
AirGreen, from plan to commissioning
A family HVAC business holding an RBQ licence, AirGreen has been installing furnaces, air conditioners, heat pumps and zoning systems for more than 15 years. Our technicians know the duct networks of the region's bungalows, two-storey homes and townhouses, and they know where to place the dampers to get balanced zones. You can meet us at our showroom in Boucherville.
For the sale and professional installation of the Honeywell TrueZONE HZ311/U panel, contact AirGreen. We serve Montréal, Laval, Longueuil, the North Shore and the South Shore.
Key facts: HONEYWELL TrueZONE HZ311/U
Four things to know, then its ID card in twelve answers. “—” means the manufacturer does not publish it.
The HONEYWELL TrueZONE HZ311/U or its closest sibling?
The most useful comparison: the model right next to it in our catalogue.
Products that go with the HONEYWELL TrueZONE HZ311/U
Parts named in its spec sheet that we sell and install.
Installed and set up by our technicians, in five steps
What we do at your place, in order. The on-site estimate is free.
- 01CompatibilityExisting system and thermostat checked before ordering.
- 02MountingInstalled in the most representative spot.
- 03ConnectionWiring or wireless pairing, depending on the model.
- 04SettingsSet-up in the thermostat or the app.
- 05TestOperation checked with you.
HONEYWELL TrueZONE HZ311/U specifications
From the manufacturer’s sheet. Type a word: the list filters as you write.
No line matches. Try another word.
Frequently asked questions about the HONEYWELL TrueZONE HZ311/U
Short answers, no detours.
What does the HONEYWELL TrueZONE HZ311/U work with?
According to the manufacturer’s sheet: not compatible with heat pumps.
What is the warranty?
5 years, per the manufacturer’s information.
Does AirGreen install it?
Yes. We sell and install this product in Montréal, Laval, Longueuil, the South Shore and the North Shore. The on-site estimate is free.
No question matches. Call us at 514 316-2973.
Your thermostat, installed and set up by our technicians
We check your system and wiring, install the thermostat, connect it and program it with you. One visit, one installed price.

