Electronic Thermostat HONEYWELL TH114-A-024T-15S/U | Montreal, Laval, Longueuil, South Shore & North Shore
In a relay-controlled electric heating system, the type of relay determines how fine the temperature control is.
Quick facts
In a relay-controlled electric heating system, the type of relay determines how fine the temperature control is. An electromechanical relay has to limit the number of cycles to protect its contacts. A solid-state relay, with no moving parts, can switch very often. The Honeywell TH114-A-024T-15S/U takes advantage of this: this 24 V thermostat runs on 15-second cycles, or 240 cycles per hour, with an Aube RT850 or RT850T solid-state relay. Heat is then delivered in very closely spaced pulses, and the room temperature stays remarkably stable.
15-second cycles for a very stable temperature
The TH114-A-024T-15S controls electric baseboard heaters, radiant ceilings or convectors through an RT850/RT850T solid-state relay. This relay is not included and it is essential: this model is not designed for an electromechanical relay, whose contacts could not handle such a switching rate. The thermostat connects to the R, C and W terminals, runs on 24 VAC with a maximum current of 0.5 A, needs no batteries and carries CSA approval.
What short cycles change
With long cycles, the baseboard heater runs at full power for several minutes, then shuts off. The room temperature rises above the setpoint, then drops below it. With 15-second cycles, energy is delivered in small, regular doses, so the baseboard stays warm instead of going from cold to hot. Comfort feels more even, cold drafts near the windows are less noticeable and the displayed temperature better matches what you feel.
A familiar interface
Like the other TH114-A models, this one is non-programmable. Its backlit screen shows the temperature and a heating power indicator. The ON/STANDBY switch lets you shut it down at the end of the season, and the stated accuracy is ±0.5°C. Occupants have nothing new to learn: two buttons are all it takes.
Technical specifications
- Stage: 1 heating, electric heating through an external solid-state relay
- Heaters: electric baseboard heaters, radiant ceilings or convectors controlled by an Aube RT850/RT850T solid-state relay
- Power: 24 VAC, 0.5 A max.; hardwired
- 15-second cycles (240 cycles per hour)
- Requires an Aube RT850/RT850T series solid-state relay (not included)
- Terminals: R, C, W
- Non-programmable
- Display: backlit LCD; heating power indicator
- ON/STANDBY switch
- Setting range: 5 to 30°C (40 to 86°F); accuracy: ±0.5°C
- No batteries; CSA approval; connectivity: none
- Dimensions: 124 x 70 x 23 mm (4.89 x 2.76 x 0.91 in.)
- Colour: white
Installation and checks
Before installing the thermostat, our technicians identify the relay in place. If it is an electromechanical relay, the TH114-A-024T-15S/U is not suitable, and we offer you either replacement with an RT850 or RT850T solid-state relay, or a thermostat suited to the existing relay. Once the right relay is verified, they shut off the power, check that no voltage is present, check the controlled load and connect the thermostat to the R, C and W terminals with low-voltage cable. Commissioning ends with a test showing that the relay responds quickly to calls for heat.
Day to day
Once you have chosen the setpoint, all that is left is to let the thermostat do its work. Thanks to the short cycles, there is generally no need to turn up the setpoint to make up for feeling cold between two cycles, since these swings are very small. The control has no clock and keeps operating normally after a power outage. For large rooms with lots of windows, commercial spaces or areas where comfort must stay steady for long hours, this stability makes a real difference.
Fewer swings, less waste
Older thermostats often let the temperature swing before reacting. Occupants then compensate by turning up the setpoint, which increases energy use. A more accurate control fixes this: the room stays close to the chosen temperature, and you can set it a little lower without losing comfort. Add the habit of turning the setting down at night and during long absences, and you have a simple way to save throughout the cold season.
15S or standard version
The TH114-A-024T-15S/U and the TH114-A-024T/U are alike in every way, except for the cycle rate and the type of relay. The standard model runs at 4 cycles per hour with an RC840/RC840T electromechanical relay. The 15S model runs at 240 cycles per hour with an RT850/RT850T solid-state relay. If your installation already has a solid-state relay, the 15S will make the most of it. For 7-day programming, the TH115-A-024T/U is available with an RC840/RC840T relay.
Usage tips
Once installed, the thermostat fades into the background. Set the setpoint that suits you and let the control do its job; there is no point turning the setting all the way up to heat faster. Keep the front of the control clear and clean. If several rooms have the same model, consistent setpoints from one room to the next limit the exchange of cold and warm air between zones. After a power outage, simply check the display when the power comes back and adjust if needed.
Why go through AirGreen
A thermostat cannot be judged on its own: it depends on the unit it controls, the existing wiring and the way you use the house. That is why our advisors first ask simple questions about your heating system, the rooms that are hard to keep comfortable and your schedule. AirGreen Inc. is a family-owned HVAC business founded in Montréal more than 15 years ago, licensed by the RBQ, working in Montréal, Laval, Longueuil, the North Shore and the South Shore. Our technicians work cleanly, explain what they are doing and leave the installation labelled to make any future maintenance easier. Our showroom in Boucherville is open to those who prefer to see and handle the products before deciding.
Call on AirGreen for the sale and professional installation of this model in Montréal, Laval, Longueuil, the North Shore and the South Shore. Tell us the type of unit to be controlled and the number of rooms involved, and we will propose a clear solution, installed by our own technicians.
Key facts: HONEYWELL TH114-A-024T-15S/U
Four things to know, then its ID card in twelve answers. “—” means the manufacturer does not publish it.
Is the HONEYWELL TH114-A-024T-15S/U compatible with your heating?
Two steps, thirty seconds. The verdict takes your system and your wiring into account.
Full compatibility table
The terminals behind the thermostat
Tap an element to see what it does. A working diagram, not a substitute for the manufacturer’s installation guide.
Try the HONEYWELL TH114-A-024T-15S/U before you buy
Raise the setpoint, change the mode: see how it responds.
Winter, Rate Flex D and rebates: what this thermostat changes
With Hydro-Québec’s Rate Flex D, electricity costs less most of the winter and more during a few peak hours. Turning the setpoint down a few degrees during those hours is what counts.
The HONEYWELL TH114-A-024T-15S/U or its closest sibling?
The most useful comparison: the model right next to it in our catalogue.
The right thermostat in three questions
If this model is not the right one for you, the page says so and shows you which one is.
Installed and set up by our technicians, in five steps
What we do at your place, in order. The on-site estimate is free.
- 01InspectionEquipment, stages to control and existing wiring.
- 02C wireCommon wire added if the model needs it and it is missing.
- 03MountingWall base, terminal wiring, cover plate if needed.
- 04SettingsEquipment type, stages, dual energy and accessories.
- 05Start-upConnection, app, schedule and tests with you.
HONEYWELL TH114-A-024T-15S/U specifications
From the manufacturer’s sheet. Type a word: the list filters as you write.
No line matches. Try another word.
Frequently asked questions about the HONEYWELL TH114-A-024T-15S/U
Short answers, no detours.
What does the HONEYWELL TH114-A-024T-15S/U work with?
According to the manufacturer’s sheet: electric baseboards, radiant ceilings or convectors controlled by an Aube RT850/RT850T solid-state relay.
Does it need a C wire?
Per the spec sheet, it can run on batteries; a common wire is still recommended when available.
Can it control electric baseboards?
No. It is a low-voltage (24 V) thermostat. 120/240 V baseboards need a line-voltage electronic thermostat.
Can it be controlled remotely?
Not directly: it has no built-in Wi-Fi.
What is the warranty?
3 years, per the manufacturer’s information.
Does AirGreen install it?
Yes. We sell and install this product in Montréal, Laval, Longueuil, the South Shore and the North Shore. The on-site estimate is free.
No question matches. Call us at 514 316-2973.
Your thermostat, installed and set up by our technicians
We check your system and wiring, install the thermostat, connect it and program it with you. One visit, one installed price.
