Electronic Thermostat HONEYWELL TH140-28-01-B/U | Montreal, Laval, Longueuil, South Shore & North Shore
Few thermostats can control a millivolt system as well as a 240 V installation.
Quick facts
Few thermostats can control a millivolt system as well as a 240 V installation. The Honeywell TH140-28-01-B/U, from the Aube line, covers that whole range. This 7-day programmable electronic thermostat controls heating only on conventional central systems, including hot water heating, and can control electric heating through a relay. It offers 28 programs per week, or four periods per day, pump protection for hydronic systems and advanced control that limits temperature swings. For houses, plexes and small buildings with a mix of equipment, it is a remarkably versatile programmable control.
One control, from millivolt to 240 V
The TH140-28 works on 24 VAC, 120 VAC, 240 VAC and millivolt systems, with a load of 5 A resistive or 2 A inductive. It suits conventional central heating, hot water boilers and, with the RC840/U, RC840T-240/U or RC840T-347/U relays, electric heating. It is powered by two AA alkaline batteries, with a low battery indicator that warns you 60 days ahead. It is UL/cUL approved.
Cycles matched to your equipment
The operating cycle is selectable, so it can match the heating system: a hot water unit, which responds slowly, is not controlled the same way as a forced-air furnace. Advanced control keeps the temperature close to the setpoint and limits variations between two cycles. The thermistor sensor displays the temperature in 0.1-degree increments.
Pump protection
For hot water systems, the TH140-28 runs the pump for one minute every 24 hours. This daily start-up helps prevent the pump from sitting idle for the entire warm season. The thermostat also has a remote input for the CT240-01/U telephone controller.
Technical specifications
- Stage: 1 heating (heating only)
- Systems: conventional central heating from millivolt to 240 V, including hot water; electric heating through a relay
- Power: 24 VAC / 120 VAC / 240 VAC and millivolt; 2 AA alkaline batteries
- Load: 5 A resistive / 2 A inductive
- 7-day programmable, 4 periods per day (28 programs per week)
- Advanced control that reduces temperature variations
- Cycles selectable according to the heating system
- Pump protection: 1 minute every 24 hours
- Programming with the front cover removed from the base
- Display: LCD, temperature in 0.1-degree increments
- Setting range: 5 to 30 °C (40 to 85 °F)
- Low battery indicator (60-day advance warning)
- Compatible with the CT240-01/U telephone controller and the RC840/U, RC840T-240/U, RC840T-347/U relays
- Sensor: built-in thermistor; UL/cUL approval; connectivity: none
- Dimensions: 127 x 97 x 26 mm (4.9 x 3.8 x 1 in.)
- Colour: white
An installation suited to each voltage
Because the TH140-28 can be connected to circuits ranging from millivolt to 240 V, our technicians' first step is to identify exactly what system is in place: boiler, furnace, millivolt unit or electric heating on a relay. They then shut off the power at the right spot, confirm there is no voltage and check that the controlled load respects the thermostat's capacity, which is 5 A resistive or 2 A inductive. When the heating is electric, the appropriate relay is included in the installation. After wiring, they set the cycle suited to the unit, program the schedule with you and run a full heating test.
Programming at your own pace
The TH140-28 is programmed by removing the front cover from its base, which lets you set the schedule comfortably in your hand rather than standing in front of the wall. Once the cover is back in place, the thermostat applies the four daily periods for each day of the week. In a home heated with hot water, we recommend gentle transitions between periods, because this type of system takes longer to warm up the room. The AA batteries power the control, and the low battery indicator leaves plenty of time to change them.
Programming to spend smarter
The savings from a programmable thermostat do not come from a more efficient unit, but from better use of the one you already have. By lowering the setpoint at night and during predictable absences, you reduce how long the heating runs. In winter, this simple principle makes a visible difference on the bill, with no change in comfort when you are home. We suggest starting with a modest schedule, then adjusting it after a few weeks based on how it feels.
The TH140-28 among Aube battery-powered controls
The TH140-28-01-B/U is the versatile programmable control of the line. The more compact TH135-01-B/U is non-programmable and offers Comfort, Economy and Vacation presets for 24 V, millivolt and hot water systems. The TH141HC-28-B/U keeps 7-day programming, but is meant for 24 V systems that combine heating and cooling. If your installation only heats and you want a schedule, the TH140-28 is the right choice, especially when the system voltage is out of the ordinary.
Through the seasons
At the start of fall, take a few minutes to check your thermostat: readable display, batteries in good condition if it has any, mode set to heating and an appropriate setpoint. It is also a good time to have your heating unit inspected. In spring, if your installation includes air conditioning, test the cooling mode before the first hot days. Keep the control clean and unobstructed, and avoid moving it yourself: a poorly wired thermostat can prevent the unit from starting.
An installation designed for your home
We do not sell a thermostat the way you sell a box off a shelf. Every AirGreen recommendation starts from your actual installation: type of unit, voltage, number of conductors, location of the box and your family's habits. As a Montréal family HVAC business active for more than 15 years and holding an RBQ licence, we serve Montréal, Laval, Longueuil, the North Shore and the South Shore. Our technicians come with the tools needed to check the circuit, install the control level, run operating tests and show you the settings that matter. You are left with a clean installation and a thermostat you know how to use. To see the products up close, our showroom in Boucherville is open to you.
To order this thermostat and have it installed correctly the first time, contact AirGreen. Our team serves Montréal, Laval, Longueuil, the North Shore and the South Shore, and every installation ends with complete tests and a short demonstration of the settings.
Key facts: HONEYWELL TH140-28-01-B/U
Four things to know, then its ID card in twelve answers. “—” means the manufacturer does not publish it.
Is the HONEYWELL TH140-28-01-B/U compatible with your heating?
Two steps, thirty seconds. The verdict takes your system and your wiring into account.
Full compatibility table
The terminals behind the thermostat
Tap an element to see what it does. A working diagram, not a substitute for the manufacturer’s installation guide.
Try the HONEYWELL TH140-28-01-B/U before you buy
Raise the setpoint, change the mode: see how it responds.
How much good programming can save you
Set up your typical week. The math follows the rule published by Natural Resources Canada.
Winter, Rate Flex D and rebates: what this thermostat changes
With Hydro-Québec’s Rate Flex D, electricity costs less most of the winter and more during a few peak hours. A programmable thermostat does the work for you.
The HONEYWELL TH140-28-01-B/U or its closest sibling?
The most useful comparison: the model right next to it in our catalogue.
The right thermostat in three questions
If this model is not the right one for you, the page says so and shows you which one is.
Installed and set up by our technicians, in five steps
What we do at your place, in order. The on-site estimate is free.
- 01InspectionEquipment, stages to control and existing wiring.
- 02C wireCommon wire added if the model needs it and it is missing.
- 03MountingWall base, terminal wiring, cover plate if needed.
- 04SettingsEquipment type, stages, dual energy and accessories.
- 05Start-upConnection, app, schedule and tests with you.
HONEYWELL TH140-28-01-B/U specifications
From the manufacturer’s sheet. Type a word: the list filters as you write.
No line matches. Try another word.
Frequently asked questions about the HONEYWELL TH140-28-01-B/U
Short answers, no detours.
What does the HONEYWELL TH140-28-01-B/U work with?
According to the manufacturer’s sheet: conventional central heating from millivolt to 240 V, including hot water; electric heating via relay.
Does it need a C wire?
Per the spec sheet, it can run on batteries; a common wire is still recommended when available.
Can it control electric baseboards?
No. It is a low-voltage (24 V) thermostat. 120/240 V baseboards need a line-voltage electronic thermostat.
Can it be controlled remotely?
Not directly: it has no built-in Wi-Fi.
What is the warranty?
3 years, per the manufacturer’s information.
Does AirGreen install it?
Yes. We sell and install this product in Montréal, Laval, Longueuil, the South Shore and the North Shore. The on-site estimate is free.
No question matches. Call us at 514 316-2973.
Your thermostat, installed and set up by our technicians
We check your system and wiring, install the thermostat, connect it and program it with you. One visit, one installed price.
