EMERSON Classic 70 Series 1F72-151 Thermostat | Montreal, Laval, Longueuil, South Shore & North Shore
A central heat pump with backup heat and a plain schedule, one for weekdays and one for the weekend: this programmable Classic 70 is made for heat pumps only.
Quick facts
Your home is heated by a central heat pump with backup heat, and a weekday / weekend schedule is all you need. The Classic 70 Series 1F72-151 (EMERSON’s White-Rodgers line) is a 5-2 day programmable thermostat made for heat pumps only. In its 2025 cross-reference table, the brand lists the EMERSON 70 Series 1F75H-21PR to replace the 1F72-151.
What it does for your heat pump
- Heat pump 2 heat / 1 cool, with or without backup or emergency heat.
- 5-2 day programming: one schedule for weekdays, another for the weekend.
- Energy Management Recovery, which starts recovery early so the setpoint is reached at the programmed time.
- Emergency heat mode and fan Auto or On.
- Backlit LCD and a setpoint range of 7 to 32 °C (45 to 90 °F), with no Wi-Fi.
- Powered at 20 to 30 VAC, with AAA batteries that keep the program.
Heat pump only
It controls a central heat pump. Its instructions exclude conventional systems, gas, oil or electric furnaces and hydronic systems, and the manufacturer’s documents do not provide dual-fuel control for this model. It is not meant for electric baseboards, convectors, electric floor heating or wall or ducted heat pumps either.
Compared with other 70 Series models
Next to the 1F72-151, the EMERSON 70 Series 1F75H-21PR goes further: 7-day, 5-1-1 or non-programmable with 4 periods a day, dual fuel with the dual-fuel logic option, a setpoint up to 37 °C, and 2 AA batteries or hardwired power. Its optional F61-2663 wall plate covers the marks left by the old thermostat. If you do not need a schedule, the EMERSON Classic 70 Series 1F79-111 is the non-programmable version for the same 2 / 1 heat pump, hardwired with backup batteries.
Installation by AirGreen: C wire and load
Since this thermostat runs on 20 to 30 VAC and its AAA batteries only keep the program, we first check that your wall cable includes a C wire. Its rated load runs from 0.05 A to 1.0 A per terminal and does not exceed 1.5 A in total: we check the actual load at hookup, then set up the backup and emergency heat. Your first step is a free in-home estimate.
Manufacturer document: Classic 70 1F72 installation instructions (37-6498). Sold and installed by AirGreen. We serve Montréal, Laval, Longueuil, the North Shore and the South Shore.
Key facts: EMERSON Classic 70 Series 1F72-151
Four things to know, then its ID card in twelve answers. “—” means the manufacturer does not publish it.
Is the EMERSON Classic 70 Series 1F72-151 compatible with your heating?
Two steps, thirty seconds. The verdict takes your system and your wiring into account.
Full compatibility table
The terminals behind the thermostat
Tap an element to see what it does. A working diagram, not a substitute for the manufacturer’s installation guide.
Try the EMERSON Classic 70 Series 1F72-151 before you buy
Raise the setpoint, change the mode: see how it responds.
How much good programming can save you
Set up your typical week. The math follows the rule published by Natural Resources Canada.
Winter, Rate Flex D and rebates: what this thermostat changes
With Hydro-Québec’s Rate Flex D, electricity costs less most of the winter and more during a few peak hours. A programmable thermostat does the work for you.
The EMERSON Classic 70 Series 1F72-151 or its closest sibling?
The most useful comparison: the model right next to it in our catalogue.
The right thermostat in three questions
If this model is not the right one for you, the page says so and shows you which one is.
Installed and set up by our technicians, in five steps
What we do at your place, in order. The on-site estimate is free.
- 01InspectionEquipment, stages to control and existing wiring.
- 02C wireCommon wire added if the model needs it and it is missing.
- 03MountingWall base, terminal wiring, cover plate if needed.
- 04SettingsEquipment type, stages, dual energy and accessories.
- 05Start-upConnection, app, schedule and tests with you.
EMERSON Classic 70 Series 1F72-151 specifications
From the manufacturer’s sheet. Type a word: the list filters as you write.
No line matches. Try another word.
Frequently asked questions about the EMERSON Classic 70 Series 1F72-151
Short answers, no detours.
What does the EMERSON Classic 70 Series 1F72-151 work with?
According to the manufacturer’s sheet: heat pump only: the instructions exclude conventional systems, gas, oil or electric furnaces and hydronic systems.
Does it need a C wire?
Yes. It needs wired 24 V power with a common wire. If the wire is missing, our technicians add a conductor during installation.
Can it control electric baseboards?
No. It is a low-voltage (24 V) thermostat. 120/240 V baseboards need a line-voltage electronic thermostat.
Can it be controlled remotely?
Not directly: it has no built-in Wi-Fi.
Does AirGreen install it?
Yes. We sell and install this product in Montréal, Laval, Longueuil, the South Shore and the North Shore. The on-site estimate is free.
No question matches. Call us at 514 316-2973.
Your thermostat, installed and set up by our technicians
We check your system and wiring, install the thermostat, connect it and program it with you. One visit, one installed price.
