Thermostat HONEYWELL FocusPRO® N100 3H/2C TH1320U4002/U | Montreal, Laval, Longueuil, South Shore & North Shore
Multi-stage heating and cooling systems provide more even comfort, as long as they're controlled by a thermostat capable of managing each of those stages.
Quick facts
Multi-stage heating and cooling systems provide more even comfort, as long as they're controlled by a thermostat capable of managing each of those stages. The Honeywell FocusPRO N100 TH1320U4002/U meets that requirement without adding complexity for the occupant. It controls up to 3 heating stages and 2 cooling stages on a heat pump, or up to 2 heating and 2 cooling stages on a conventional system. For you, it stays as simple to use as an entry-level thermostat: you pick the mode, adjust the temperature with the up and down buttons, and the control takes care of running the right stage at the right time.
Multi-stage versatility, without programming
The N100 3H/2C is aimed first at homes with a two-stage central heat pump and backup heat, at dual energy installations that combine a heat pump and a furnace, and at conventional systems with two stages of heating and cooling. It works with 24 V gas, oil and electric systems, and with hot-water and steam radiant heating. That broad compatibility also makes it a practical choice for building managers who want the same model across several units with different equipment.
Why stages matter
A two-stage unit runs at reduced output most of the time, which gives longer cycles, a more even temperature and quieter operation. It only goes to full output when demand calls for it, for example on a bitterly cold January morning or a heat-wave afternoon. But the thermostat still has to know how to control those stages. With a single-stage thermostat, a multi-stage unit loses much of its advantage. The N100 3H/2C lets your equipment run the way it was designed to.
Readability and installer settings
Its 4.09 sq in. LED-backlit LCD screen shows crisp characters, and the backlight can stay on permanently when the unit is hardwired. Stated accuracy is ±0.5 °C. The settings available to technicians include automatic or manual changeover, the filter reminder, the low heat limit of 4 °C by default, adjustable down to 0 °C for a garage, and the option to lock the fan after a cooling call. The C7089U1006 wired outdoor sensor can be added as an option.
Technical specifications
- Stages: up to 3 heating / 2 cooling on a heat pump, and up to 2 heating / 2 cooling on a conventional system
- Systems: 24 VAC gas, oil or electric, steam or hot-water radiant; heat pumps with backup heat; dual energy
- Power: 20 to 30 VAC, 60 Hz; AA batteries (included) or hardwired connection
- Display: medium 4.09 sq in. LED-backlit LCD (not touchscreen)
- Non-programmable; intuitive navigation and customizable display settings
- Connectivity: none
- Optional C7089U1006 wired outdoor sensor
- Accuracy: ±0.5 °C (1 °F)
- Automatic or manual changeover; optional filter reminder
- Low heat limit: 4 °C by default, adjustable to 0 °C
- UWP universal wall plate
- Dimensions: 130 x 87 x 29.5 mm (5.125 x 3.438 x 1.188 in.)
- Colour: white
- Contents: thermostat, UWP wall plate, cover plate with electrical box adapter, hardware, AA batteries, documentation
How the installation goes
Our visit starts with a look at the existing installation: number of wires, whether or not there's a C wire, type of unit and condition of the wall box. After shutting off power to the equipment, the technician photographs and labels the wiring, removes the old thermostat and mounts the new base level. The wires are then connected, the control is configured for your system, and a real test is run to watch the burner, heat pump or fan start up. The holes left by the old model are taken into account when choosing the cover plate. Finally, you get a short demonstration of the settings you'll use day to day.
Setup and use
A multi-stage thermostat is configured at installation, and that takes precise knowledge of the equipment. Our technicians confirm the actual number of stages on your unit, the type of backup heat and the terminal wiring, then set the control accordingly. The UWP wall plate stays fixed to the wall, which makes future service easier. After that, using it is very simple: heating, cooling or auto mode, setpoint adjusted with the buttons, fan as needed. The control can run on the supplied AA batteries or be hardwired; in that case, the backlight can stay on. A snap-on accent piece also allows custom identification.
Comfort at the right degree
During a Québec winter, the difference between a comfortable house and an overheated one often comes down to one or two degrees. A thermostat that reads the temperature accurately and holds it steadily avoids the overshoots that push up the bill. To go further, adopt a simple routine: a normal setpoint while you're home and a lower setpoint at night or when you're away. This manual adjustment takes a few seconds and gives concrete results over a full season.
The 3H/2C versus the 2H/1C in the same family
The FocusPRO N100 also comes in a TH1210U4001/U version, limited to 2 heating and 1 cooling stage on a heat pump. Both models share the same 130 x 87 mm white housing, the same screen and the same UWP plate; only the control capacity changes. The 2H/1C is enough for a heat pump with one cooling stage. The 3H/2C becomes necessary as soon as the unit has two cooling stages, or when you want to keep some headroom for a future replacement with a multi-stage model. If you're unsure, we check your unit's nameplate and tell you which one fits.
Keeping the control reliable
Avoid placing lamps, TVs or furniture right under the thermostat: the heat they give off or the air they block throws off the reading. Clean the surface with a soft, dry cloth. When batteries are installed, change them before winter so a sudden cold snap doesn't catch you off guard. If you notice the heating starting and stopping very often, or not stopping at all, contact us: it may be a cycle setting, a loose wire or a part of the unit that needs checking.
One point of contact, from selection to start-up
At AirGreen, the person who advises you works with the technicians who come to your home. That continuity avoids misunderstandings: the model ordered matches your installation, the wiring is checked on site and the settings are made to suit your lifestyle. A family business established for more than 15 years and holding an RBQ licence, we serve homeowners, authorized tenants and building managers in Montréal, Laval, Longueuil, the North Shore and the South Shore. We know the region's housing stock well, from 1950s duplexes to new suburban homes, and we know what surprises an old wall box can hold. You can also stop by our Boucherville showroom to compare controls before making your choice.
To replace your current control, contact AirGreen today for the sale and installation of this model by our technicians, anywhere in Montréal, Laval, Longueuil, the North Shore and the South Shore. We confirm your installation, set up an appointment and leave the thermostat set to your schedule.
Key facts: HONEYWELL FocusPRO® N100 3H/2C TH1320U4002/U
Four things to know, then its ID card in twelve answers. “—” means the manufacturer does not publish it.
Is the HONEYWELL FocusPRO® N100 3H/2C TH1320U4002/U compatible with your heating?
Two steps, thirty seconds. The verdict takes your system and your wiring into account.
Full compatibility table
The terminals behind the thermostat
Tap an element to see what it does. A working diagram, not a substitute for the manufacturer’s installation guide.
Try the HONEYWELL FocusPRO® N100 3H/2C TH1320U4002/U before you buy
Raise the setpoint, change the mode: see how it responds.
Winter, Rate Flex D and rebates: what this thermostat changes
With Hydro-Québec’s Rate Flex D, electricity costs less most of the winter and more during a few peak hours. Turning the setpoint down a few degrees during those hours is what counts.
The HONEYWELL FocusPRO® N100 3H/2C TH1320U4002/U or its closest sibling?
The most useful comparison: the model right next to it in our catalogue.
The right thermostat in three questions
If this model is not the right one for you, the page says so and shows you which one is.
Products that go with the HONEYWELL FocusPRO® N100 3H/2C TH1320U4002/U
Parts named in its spec sheet that we sell and install.
Installed and set up by our technicians, in five steps
What we do at your place, in order. The on-site estimate is free.
- 01InspectionEquipment, stages to control and existing wiring.
- 02C wireCommon wire added if the model needs it and it is missing.
- 03MountingWall base, terminal wiring, cover plate if needed.
- 04SettingsEquipment type, stages, dual energy and accessories.
- 05Start-upConnection, app, schedule and tests with you.
HONEYWELL FocusPRO® N100 3H/2C TH1320U4002/U specifications
From the manufacturer’s sheet. Type a word: the list filters as you write.
No line matches. Try another word.
Frequently asked questions about the HONEYWELL FocusPRO® N100 3H/2C TH1320U4002/U
Short answers, no detours.
What does the HONEYWELL FocusPRO® N100 3H/2C TH1320U4002/U work with?
According to the manufacturer’s sheet: 24 VAC gas, oil or electric, steam or radiant hot water; heat pumps with backup; dual energy.
Does it need a C wire?
Per the spec sheet, it can run on batteries; a common wire is still recommended when available.
Can it control electric baseboards?
No. It is a low-voltage (24 V) thermostat. 120/240 V baseboards need a line-voltage electronic thermostat.
Can it be controlled remotely?
Not directly: it has no built-in Wi-Fi.
What is the warranty?
5 years, per the manufacturer’s information.
Does AirGreen install it?
Yes. We sell and install this product in Montréal, Laval, Longueuil, the South Shore and the North Shore. The on-site estimate is free.
No question matches. Call us at 514 316-2973.
Your thermostat, installed and set up by our technicians
We check your system and wiring, install the thermostat, connect it and program it with you. One visit, one installed price.

