Thermostat HONEYWELL T6 Pro TH6210U2001/U | Montreal, Laval, Longueuil, South Shore & North Shore
A geothermal heat pump or an air-to-air heat pump represents a significant investment.
Quick facts
A geothermal heat pump or an air-to-air heat pump represents a significant investment. The thermostat that controls it has to measure up: able to tell the heat pump apart from the backup heat, simple to use and reliable year after year. The Honeywell T6 Pro TH6210U2001/U programmable thermostat meets these expectations for systems with up to 2 heating stages and 1 cooling stage (2H/1C) with a heat pump, and as a bonus it leaves the door open to the connected version of the series.
A programmable thermostat for heat pumps and geothermal systems
The T6 Pro TH6210U2001/U controls air-to-air and geothermal heat pumps up to 2H/1C, meaning one heat pump stage and one backup stage in heating, plus one cooling stage. It also suits 1H/1C conventional systems, namely gas, oil or electric forced air, in standard or high-efficiency versions, as well as hot water fan coils.
This 24 V thermostat does not control electric baseboards powered at 120/240 V; those installations need a line voltage electronic thermostat.
Simple buttons, a large screen
The T6 Pro puts clarity first. Its large 5.44 sq in. screen, with LED backlighting, comes with context-sensitive buttons that change function depending on the menu shown. Simple push-button operation reassures people who are not comfortable with touchscreens. Changeover between heating and cooling is automatic or manual, and stated accuracy is ±0.5 °C (1 °F).
7-day, 5-2 or 5-1-1 programming
You choose a 7-day, 5-2 or 5-1-1 schedule, or non-programmable operation. The heating setpoint ranges from 4.5 to 32 °C and the cooling setpoint from 10 to 37 °C. With a heat pump, and even more so with geothermal, we recommend moderate setbacks: these systems perform best at a steady pace, and a recovery that is too fast can call on the backup heat more than necessary.
Batteries or hardwired power
The T6 Pro is powered by 20 to 30 VAC, either on two AA batteries (included) or hardwired. This choice makes installation easier when the existing wiring has no common wire.
An easy upgrade to the T6 Pro Smart
The T6 Pro uses the UWP mounting system, standard across Honeywell's entire T series. In practical terms, if you later decide you want remote control, upgrading to a Wi-Fi T6 Pro Smart is easy on the same mount. The only condition is that the connected version requires a C wire. During installation, our technicians can check whether this conductor is available, so the upgrade is simple when the day comes.
Filter reminders
Filter change reminders are especially useful with a heat pump or a geothermal system, whose performance depends on good airflow. A clogged filter reduces the capacity delivered and lengthens the cycles.
Installation by our technicians
The box contains the thermostat, the UWP mounting system, an electrical box installation adapter, a small decorative cover plate, screws and anchors, the installation and user guides, and two AA batteries.
- We identify the equipment and the wires for the heat pump, the reversing valve and the backup heat.
- We install the UWP mount and connect the thermostat.
- We configure the heat pump type, the backup stage and the changeover mode.
- We program the schedule with you and test the heating, backup heat and cooling.
Winter with a heat pump
During a Québec winter, a properly controlled heat pump provides most of the heating and lets the backup heat step in when conditions require it. The T6 Pro manages this sequence reliably. With a schedule suited to your routine and reasonable setbacks, the system maintains stable comfort while limiting the use of backup heat, which uses more energy.
Which projects it suits
We install this model in several situations: replacing a faulty thermostat on an existing heat pump, starting up a new single-stage air-to-air heat pump with backup elements, a residential geothermal project, or a simple conventional system whose owner wants an easy-to-read programmable thermostat. In a rental unit, the simple buttons and large screen cut down on calls from tenants puzzled by a complicated device.
The TH6210U2001/U in the T6 Pro family
The T6 Pro TH6210U2001/U is aimed at single-stage heat pumps with backup heat. The TH6220U2000/U is mainly for two-stage conventional systems, with optional dual energy. The TH6320U2008/U goes up to 3H/2C with a heat pump. They all share the same housing, the same screen and the same UWP mount.
Maintenance
Replace the batteries at the start of each heating season if the thermostat is not hardwired. Clean the screen with a soft, dry cloth. For an air-to-air heat pump, keep the outdoor unit clear of snow; for a geothermal system, have the loop and the indoor unit checked during the annual service.
Technical specifications
- Stages: up to 2H/1C with a heat pump; up to 1H/1C with a conventional system
- Systems: gas, oil or electric forced air (standard and high efficiency), hot water fan coil, geothermal and air-to-air heat pumps
- Power supply: 20 to 30 VAC; 2 AA batteries (included) or hardwired
- Screen: large 5.44 sq in. screen with LED backlighting, context-sensitive buttons, non-touch
- Connectivity: none (no Wi-Fi); can be upgraded to the T6 Pro Smart (C wire required)
- Programming: 7-day, 5-2, 5-1-1 or non-programmable
- Setpoints: heating 4.5 to 32 °C, cooling 10 to 37 °C
- Changeover: automatic or manual
- Accuracy: ±0.5 °C (1 °F)
- Filter reminders: yes
- Dimensions: 103.6 x 103.6 x 28 mm
- Colour: white
- Contents: thermostat, UWP mount, installation adapter, small cover plate, screws and anchors, guides, 2 AA batteries
AirGreen, from the heat pump to the thermostat
AirGreen Inc. is a family HVAC business with more than 15 years of experience, holding an RBQ licence, with a showroom in Boucherville. To buy the T6 Pro TH6210U2001/U and have it professionally installed on your heat pump or geothermal system, contact AirGreen in Montréal, Laval, Longueuil, the North Shore and the South Shore.
Key facts: HONEYWELL T6 Pro TH6210U2001/U
Four things to know, then its ID card in twelve answers. “—” means the manufacturer does not publish it.
Is the HONEYWELL T6 Pro TH6210U2001/U compatible with your heating?
Two steps, thirty seconds. The verdict takes your system and your wiring into account.
Full compatibility table
The terminals behind the thermostat
Tap an element to see what it does. A working diagram, not a substitute for the manufacturer’s installation guide.
Try the HONEYWELL T6 Pro TH6210U2001/U before you buy
Raise the setpoint, change the mode: see how it responds.
How much good programming can save you
Set up your typical week. The math follows the rule published by Natural Resources Canada.
Winter, Rate Flex D and rebates: what this thermostat changes
With Hydro-Québec’s Rate Flex D, electricity costs less most of the winter and more during a few peak hours. A programmable thermostat does the work for you.
The HONEYWELL T6 Pro TH6210U2001/U or its closest sibling?
The most useful comparison: the model right next to it in our catalogue.
The right thermostat in three questions
If this model is not the right one for you, the page says so and shows you which one is.
Installed and set up by our technicians, in five steps
What we do at your place, in order. The on-site estimate is free.
- 01InspectionEquipment, stages to control and existing wiring.
- 02C wireCommon wire added if the model needs it and it is missing.
- 03MountingWall base, terminal wiring, cover plate if needed.
- 04SettingsEquipment type, stages, dual energy and accessories.
- 05Start-upConnection, app, schedule and tests with you.
HONEYWELL T6 Pro TH6210U2001/U specifications
From the manufacturer’s sheet. Type a word: the list filters as you write.
No line matches. Try another word.
Frequently asked questions about the HONEYWELL T6 Pro TH6210U2001/U
Short answers, no detours.
What does the HONEYWELL T6 Pro TH6210U2001/U work with?
According to the manufacturer’s sheet: gas, oil or electric forced air (standard and high efficiency), hot water fan coil, geothermal and air-to-air heat pumps.
Does it need a C wire?
Per the spec sheet, it can run on batteries; a common wire is still recommended when available.
Can it control electric baseboards?
No. It is a low-voltage (24 V) thermostat. 120/240 V baseboards need a line-voltage electronic thermostat.
Can it be controlled remotely?
Not directly: it has no built-in Wi-Fi.
What is the warranty?
5 years, per the manufacturer’s information.
Does AirGreen install it?
Yes. We sell and install this product in Montréal, Laval, Longueuil, the South Shore and the North Shore. The on-site estimate is free.
No question matches. Call us at 514 316-2973.
Your thermostat, installed and set up by our technicians
We check your system and wiring, install the thermostat, connect it and program it with you. One visit, one installed price.
