Kit HONEYWELL T10+ Pro Smart with EIM and Room Sensor YTHM1004R3000/U | Montreal, Laval, Longueuil, South Shore & North Shore

In stock
SKU: YTHM1004R3000/U

Replacing a thermostat is simple. Upgrading the entire control of a heating and cooling system in a finished house is much less so: it often takes more conductors than the ones that run up the wall, and the thermostat is not always in the right place.

24 Vlow-voltage thermostat
Wi-Fiincluded
5 yearsmanufacturer warranty
ENERGY STARWi-Fi includedTouch screenProgrammable
Get my installed price 514 316-2973

Quick facts

Model numberYTHM1004R3000/U
ProgrammableYes
Wi-FiIncluded
Touch screenYes
ENERGY STARYes
Warranty5 years

Replacing a thermostat is simple. Upgrading the entire control of a heating and cooling system in a finished house is much less so: it often takes more conductors than the ones that run up the wall, and the thermostat is not always in the right place. The Honeywell T10+ Pro YTHM1004R3000/U kit brings together in one box the three components that settle both of these points: the T10+ Pro smart thermostat, the equipment interface module (EIM) and a wireless room sensor. This is the kit we offer for a complete upgrade without opening the walls.

A complete upgrade in a single kit

The T10+ Pro thermostat

The T10+ Pro is a smart thermostat with a 7.27 sq in. touchscreen, 7-day programmable, with geofencing and priority scheduling. It connects over Wi-Fi for remote control with the Resideo app, and communicates with its wireless accessories over RedLINK 3.0 (900 MHz, about 200 ft in a typical home). Automatic or manual changeover between heating and cooling adjusts to your preferences. The thermostat is ENERGY STAR qualified according to the manufacturer.

The EIM

The EIM is installed near the equipment, in the mechanical room, and connects directly to the furnace, heat pump or air conditioner. The thermostat sends it its calls wirelessly. The result: no new thermostat wires, even if your equipment has more stages than the old wire can control. With the EIM, the kit handles up to 4 heating and 2 cooling stages on a heat pump, or 3 heating and 2 cooling stages in conventional mode. Without the EIM, the thermostat alone is limited to 3H/2C on a heat pump and 2H/2C in conventional mode.

The wireless room sensor

The wireless indoor sensor measures temperature, humidity and motion. Placed in the room of your choice, it lets the thermostat give priority to that room or to occupied rooms. The thermostat is no longer the sole judge of the temperature in the house.

Return and supply air sensors

The kit also includes return and supply air sensors, installed in the ducts. They give the thermostat operating data that is useful for system diagnostics, which makes it easier for our technicians to check that the equipment heats and cools as it should.

Compatible systems

The kit works with 24 VAC systems: gas, oil, electric, steam or gravity, heat pumps and dual energy. It is just as suitable for a furnace paired with an air conditioner as for a central heat pump with backup heat. It does not apply to 240 V electric baseboard heaters, or to wall-mounted heat pumps that use their own control.

Installation, settings and everyday use

The thermostat is hardwired on 20 to 30 VAC, and the EIM connects to the equipment. Here is how an AirGreen installation goes:

  1. Assessment of the equipment: number of stages, type of system, current thermostat location.
  2. Installation of the EIM near the unit and connection of each stage.
  3. Installation of the return and supply sensors in the ducts.
  4. Installation of the thermostat with the UWP mounting system and the supplied trim plate.
  5. Installation of the wireless room sensor and pairing with the thermostat.
  6. Wi-Fi connection, Resideo app setup and initial programming with you.

The trim plate helps cover the marks left by the old thermostat. The white thermostat measures 124 x 94 x 24 mm, and the grey EIM 237 x 122 x 40 mm.

Day to day

The touchscreen clearly shows the temperature, the setpoint and the mode. You can program a 7-day schedule, or let geofencing adjust the temperature based on your presence, detected by your phone. Priority scheduling tells the thermostat which room matters most at different times of day: the living room in the evening, a bedroom at night. The Resideo app lets you change all of this remotely.

Energy savings in the cold season

A Québec winter puts heavy demand on the heating system. The T10+ Pro cuts waste in several ways: programming lowers the setpoint while you are away, geofencing avoids heating an empty house, and the room sensor keeps you from overheating the whole house to warm up a single room. With a multi-stage heat pump, the EIM lets you control each stage, so the equipment can run in first stage most of the time.

Add-on options

The kit can be expanded. The C7089R3013 wireless outdoor sensor can be added as an option to display the outdoor temperature and take it into account. The thermostat also accepts wired sensors such as the C7189U1005 indoor sensor, the C7089U1006 outdoor sensor and the AC112-01 sensor. If you are planning a dual-energy system from the start, the YTHM1004R3001/U kit, which already includes the outdoor sensor, may be the better choice.

Maintenance

The thermostat only needs a light dusting of the screen with a soft, dry cloth. Replace the room sensor batteries when the thermostat tells you to, and change your unit's filter at the recommended intervals. During the annual maintenance visit, we review the air sensor data to check how the system is running.

Technical specifications

  • Contents: T10+ Pro thermostat, equipment interface module (EIM), wireless indoor sensor, return and supply air sensors, UWP mounting system, trim plate, hardware
  • Stages with EIM: up to 4 heating / 2 cooling on a heat pump; 3 heating / 2 cooling conventional
  • Stages without EIM: 3 heating / 2 cooling on a heat pump; 2 heating / 2 cooling conventional
  • Systems: 24 VAC — gas, oil, electric, steam/gravity, heat pump, dual energy
  • Power: 20 to 30 VAC, hardwired
  • Display: 7.27 sq in. touchscreen
  • Connectivity: Wi-Fi + RedLINK 3.0 (900 MHz, about 200 ft in a typical home)
  • App: Resideo
  • Programming: 7-day, geofencing, priority scheduling
  • Sensors: wireless room sensor (temperature, humidity, motion), return and supply air sensors
  • Changeover: automatic or manual
  • Dimensions: thermostat 124 x 94 x 24 mm (4.9 x 3.7 x 0.93 in.); EIM 237 x 122 x 40 mm
  • Colour: white thermostat; grey EIM
  • Certification: ENERGY STAR (according to the manufacturer)
  • Optional accessories: C7089R3013 wireless outdoor sensor; C7189U1005, C7089U1006 and AC112-01 wired sensors

Why AirGreen

AirGreen is a family-owned HVAC business established in Montréal for more than 15 years, holding an RBQ licence, with a showroom in Boucherville. We install furnaces, central heat pumps and smart thermostats, and we configure each T10+ Pro kit to match the equipment actually in place. Before we leave, we walk you through the app, the schedule and room priority.

For the purchase and professional installation of the Honeywell T10+ Pro YTHM1004R3000/U kit, contact AirGreen. We serve Montréal, Laval, Longueuil, the North Shore and the South Shore.

01 · Key facts

Key facts: HONEYWELL T10+ Pro Smart with EIM and Room Sensor YTHM1004R3000/U

Four things to know, then its ID card in twelve answers. “—” means the manufacturer does not publish it.

Type24 V thermostatHONEYWELL T10+ Pro Smart with EIM and Room Sensor YTHM1004R3000/U
For24 VAC — gas, oil, electric, steam/gravity, heat pump,…Systems
Power20 to 30 VAC, hardwiredPower supply
ConnectionWi-Fi + RedLINK 3.0Connectivity
02 · Compatible?

Is the HONEYWELL T10+ Pro Smart with EIM and Room Sensor YTHM1004R3000/U compatible with your heating?

Two steps, thirty seconds. The verdict takes your system and your wiring into account.

Full compatibility table

Heating systemVerdictWhy
Central heat pumpYesThe spec sheet lists heat pumps.
Dual energy (heat pump + furnace)YesThe spec sheet lists heat pumps.
Electric furnaceYes24 V control of the furnace.
Gas or oil furnaceYes24 V control of the furnace; the thermostat does not touch the fuel supply.
Steam, gravity or hot waterDepends on the modelThe spec sheet lists steam or gravity; for hot water, see the manufacturer’s sheet.
Baseboards, convectors, radiant ceilingNoA baseboard runs on 120/240 V: it needs a line-voltage electronic thermostat.
Fan-forced heaterNoA fan-forced heater needs a line-voltage thermostat rated for fans.
Electric floor heatingNoElectric floor heating needs a floor thermostat with a probe.
Wall or ducted mini-split heat pumpNoA wall heat pump is controlled by its own brand’s controller or a compatible Wi-Fi module.
03 · Wiring

The terminals behind the thermostat

Tap an element to see what it does. A working diagram, not a substitute for the manufacturer’s installation guide.

04 · Try it

Try the HONEYWELL T10+ Pro Smart with EIM and Room Sensor YTHM1004R3000/U before you buy

Raise the setpoint, change the mode: see how it responds.

05 · Your savings

How much good programming can save you

Set up your typical week. The math follows the rule published by Natural Resources Canada.

06 · Winter and rebates

Winter, Rate Flex D and rebates: what this thermostat changes

With Hydro-Québec’s Rate Flex D, electricity costs less most of the winter and more during a few peak hours. A programmable thermostat does the work for you.

07 · Room by room

The sensor decides which room counts

An interactive drawing of what this kind of control does day to day.

08 · Head to head

The HONEYWELL T10+ Pro Smart with EIM and Room Sensor YTHM1004R3000/U or its closest sibling?

The most useful comparison: the model right next to it in our catalogue.

09 · The right choice

The right thermostat in three questions

If this model is not the right one for you, the page says so and shows you which one is.

10 · The system

Products that go with the HONEYWELL T10+ Pro Smart with EIM and Room Sensor YTHM1004R3000/U

Parts named in its spec sheet that we sell and install.

11 · Installation

Installed and set up by our technicians, in five steps

What we do at your place, in order. The on-site estimate is free.

  1. 01InspectionEquipment, stages to control and existing wiring.
  2. 02C wireCommon wire added if the model needs it and it is missing.
  3. 03MountingWall base, terminal wiring, cover plate if needed.
  4. 04SettingsEquipment type, stages, dual energy and accessories.
  5. 05Start-upConnection, app, schedule and tests with you.
12 · Specifications

HONEYWELL T10+ Pro Smart with EIM and Room Sensor YTHM1004R3000/U specifications

From the manufacturer’s sheet. Type a word: the list filters as you write.

Format and contentsContentsT10+ Pro thermostat, equipment interface module (EIM), wireless indoor sensor, return and supply air probes, UWP mounting system, trim plate, hardware
GeneralStages with EIMup to 4 heat / 2 cool in heat pump; 3 heat / 2 cool conventional
GeneralStages without EIM3 heat / 2 cool heat pump; 2 heat / 2 cool conventional
GeneralSystems24 VAC — gas, oil, electric, steam/gravity, heat pump, dual energy
ElectricalPower supply20 to 30 VAC, hardwired
Format and contentsDisplay7.27 sq. in. touch screen
ConnectivityConnectivityWi-Fi + RedLINK 3.0 (900 MHz, about 200 ft in a typical home)
ConnectivityAppResideo
GeneralProgramming7 days, geofencing, priority schedule
GeneralSensorswireless room sensor (temperature, humidity, motion), return and supply air probes
GeneralMode changeoverautomatic or manual
Format and contentsDimensionsthermostat 124 x 94 x 24 mm (4.9 x 3.7 x 0.93 in.); EIM 237 x 122 x 40 mm
Format and contentsColourwhite thermostat; grey EIM
GeneralCertificationENERGY STAR (according to the manufacturer)
GeneralOptional accessoriesC7089R3013 wireless outdoor sensor; C7189U1005, C7089U1006, AC112-01 wired sensors
13 · Questions

Frequently asked questions about the HONEYWELL T10+ Pro Smart with EIM and Room Sensor YTHM1004R3000/U

Short answers, no detours.

What does the HONEYWELL T10+ Pro Smart with EIM and Room Sensor YTHM1004R3000/U work with?

According to the manufacturer’s sheet: 24 VAC — gas, oil, electric, steam/gravity, heat pump, dual energy.

Does it need a C wire?

Yes. It needs wired 24 V power with a common wire. If the wire is missing, our technicians add a conductor during installation.

Can it control electric baseboards?

No. It is a low-voltage (24 V) thermostat. 120/240 V baseboards need a line-voltage electronic thermostat.

Can it be controlled remotely?

Yes, over Wi-Fi with the Resideo app.

Does it qualify for a rebate?

If you heat with natural gas from Énergir, an ENERGY STAR smart thermostat on Énergir’s list can qualify for $100 (up to 75% of the price). Have Énergir confirm the model before buying.

What is the warranty?

5 years, per the manufacturer’s information.

Does AirGreen install it?

Yes. We sell and install this product in Montréal, Laval, Longueuil, the South Shore and the North Shore. The on-site estimate is free.

AirGreen · Montréal, Laval, Longueuil, South Shore, North Shore

Your thermostat, installed and set up by our technicians

We check your system and wiring, install the thermostat, connect it and program it with you. One visit, one installed price.

RBQ 5645-9605-01Ventilation, refrigeration and electrical
Free estimateon site, before any purchase
Quote in 24 hinstalled price, no surprises
Bouchervilleshowroom

Sources checked on October 5, 2026.

  • Manufacturer’s spec sheet for this product (summarized in the description and specifications above)
  • Natural Resources Canada, “Keeping the Heat In”, section 9 (modified September 29, 2025)
  • Hydro-Québec, electricity rates in effect April 1, 2026; Rate Flex D and Winter Credit Option pages (consulted October 5, 2026)
  • Énergir, smart thermostat grant (consulted October 5, 2026)

Savings shown are estimates; only Hydro-Québec and Énergir confirm a rate or a rebate.