Rapid intervention to revive a Friedrich Inverter system
At AirGreen , we were recently called for a Friedrich Inverter heat pump repair at a residence in Pointe-Claire , on the West Island of Montreal. The customer contacted us after noticing that their system was no longer producing heat, despite a complete restart and filter cleaning. The outdoor unit, while robust, was showing signs of fatigue after several Quebec winters.
Diagnosis: An overloaded system and a potential electrical problem
Upon our arrival, our technician conducted a thorough inspection of the Friedrich Inverter heat pump . The outdoor unit, installed near a protected facade, had a buildup of dust and debris around the fan and coils. But the real problem lay elsewhere:
-
the electrical wiring showed signs of slight corrosion at the junction box;
-
the control board was no longer sending the correct signal to the compressor;
-
and the outside temperature sensor seemed to be sending an incorrect value.
These symptoms explained why the unit would no longer go into heating mode, even when the temperature dropped below zero.
Repair: cleaning, replacement and recalibration
After disconnecting the power supply , our team undertook a complete cleaning of the condenser and a check of the electrical connections . We then replaced the temperature sensor as well as the control board , which had failed after several years of thermal cycles.
Finally, a pressure test of the R-410A refrigerant confirmed the integrity of the circuit—no leaks detected, which is always good news.
Once the system was reset, the Friedrich Inverter heat pump restarted without issue, returning to its usual efficiency. We also checked the power consumption and compressor performance curve to ensure optimal operation for the coming months.
Result: comfort restored and reliability assured
The customer immediately noticed the difference:
-
the heating was uniform and stable ;
-
the noise level of the outdoor unit had decreased;
-
and power consumption stabilized after our recalibration.
We took advantage of the visit to recommend six-monthly preventive maintenance , particularly before the extreme cold, in order to avoid any overload or sudden breakdown.
Why Friedrich Systems Deserve Specialist Maintenance
Friedrich Inverter systems are renowned for their durability and efficiency, but their variable speed technology requires meticulous maintenance. Temperature sensors , circuit boards , and modulating fans must be regularly checked to maintain performance season after season.
At AirGreen, we have extensive expertise with the Friedrich brand , as well as other major manufacturers such as Midea, Gree, Fujitsu and Sharp . Our team is trained to diagnose and repair electrical faults , defrosting problems , abnormal noises and energy efficiency losses .
AirGreen Tips to Extend the Life of Your Heat Pump
-
Clean your internal filters every two months.
-
Clear the outdoor unit of any snow, ice, or leaves.
-
Schedule an annual inspection before winter or summer.
-
Avoid extension cords — ensure a direct and proper connection.
-
Call a professional at the first signs of weakness: odor, noise, or reduced performance.
Every heat pump, even the most efficient, needs attention to ensure constant comfort and controlled electricity bills.
An AirGreen service that lives up to Montreal's climate
Our team is proud to serve the Greater Montreal Area , including Laval , the North Shore and the South Shore . Whether in Pointe-Claire , Saint-Lambert , Blainville or Longueuil , we provide fast, transparent and sustainable service.
At AirGreen, every repair is an opportunity to extend the life of your HVAC equipment and ensure your comfort , no matter the season.