Installation of a ForestAir E24 wall-mounted heat pump in Les Coteaux
AirGreen installs a ForestAir E24 wall-mounted heat pump in Les Coteaux, a high-performance HVAC solution providing heating, air conditioning, and energy efficiency suited to Quebec’s climate.
- City
- Region
- Equipment
- Brand
- Challenges
- Published
The job on one screen
The article, chapter by chapter
An HVAC installation designed to provide four-season comfort in a Les Coteaux residence
At AirGreen, we regularly install wall-mounted heat pumps in the Vaudreuil-Soulanges region, including Les Coteaux, to help homeowners improve their comfort while reducing their energy costs. This installation of a ForestAir E24 wall-mounted heat pump perfectly demonstrates the importance of choosing suitable equipment, professional installation, and careful attention to technical details.
For this project, our team installed an efficient heating and air conditioning solution capable of meeting the needs of a Quebec home exposed to significant temperature variations. The ForestAir E24 heat pump was selected to provide high-performance air conditioning during the summer and effective supplemental heating during cold periods.
The outdoor unit visible in this installation was positioned on a stable structure that allows good air circulation, efficient drainage of defrost water, and better protection against winter conditions. Using suitable supports also helps limit the transmission of vibrations to the building structure.
Why choose a ForestAir E24 wall-mounted heat pump for a home in Les Coteaux?
Technology adapted to Quebec’s climate
The climate in Les Coteaux, like that of several areas on the South Shore, the North Shore, Montreal, Laval, and Longueuil, places particular demands on heating and air conditioning systems. A heat pump intended for the Quebec market must be able to operate efficiently when outdoor temperatures drop considerably.
The ForestAir E24 is one of the models designed to meet the needs of homeowners seeking a versatile solution:
- Air conditioning during the summer season ;
- Efficient electric heating during the fall, spring, and part of the winter ;
- Quiet operation to preserve indoor comfort;
- Inverter technology that adjusts power according to actual demand.
Unlike a traditional air conditioner, which only produces cooling, a ductless mini-split heat pump transfers heat between indoors and outdoors. In heating mode, it captures the thermal energy present in the outdoor air to heat the home while optimizing electricity consumption.
An interesting choice for replacing or complementing an existing heating system
Many homeowners in the Montreal area and surrounding regions still use electric baseboard heaters, aging systems, or less efficient equipment. Installing a ductless mini-split heat pump often represents a significant improvement in comfort.
For a home in Les Coteaux, the ForestAir E24 can provide:
- better temperature distribution;
- reduced use of electric baseboard heaters;
- uniform cooling in the main rooms;
- more precise comfort management through modern electronic controls.
Technical details of the installed ForestAir E24 heat pump
The ForestAir E24 installed by AirGreen is a new-generation ductless mini-split heat pump featuring modern technology designed for residential installations.
Among its key features:
- Brand: ForestAir
- Model: E24
- Type: ductless mini-split heat pump
- Refrigerant: R-454B
- Nominal capacity: approximately 12,000 BTU
- Application: residential heating and air conditioning
- Variable-speed inverter technology
Choosing the R-454B refrigerant represents an important development in the HVAC industry. This refrigerant has a lower global warming potential than several older refrigerants previously used, aligning with the sector’s new environmental guidelines.
For a homeowner, this mainly means investing in a unit designed to meet the market’s future requirements.
A professional installation that makes a difference
Strategic positioning of the outdoor unit
When installing a heat pump, the location of the outdoor unit is an essential element that is often underestimated.
In Les Coteaux, our team paid particular attention to several factors:
- sufficient clearance around the unit;
- optimal airflow;
- easy access for HVAC maintenance;
- vibration reduction;
- protection against excessive snow and ice accumulation.
In the photo of this installation, the ForestAir outdoor unit can be seen installed on a raised base with vibration-dampening elements. This configuration prevents problematic direct contact with the ground and facilitates drainage of the water produced during defrost cycles.
Refrigerant line installation and exterior finishing
A quality installation involves more than simply mounting a unit on the wall. Every detail affects the system’s performance and durability.
Our technicians check, among other things:
- the refrigerant line routing;
- adequate insulation for the lines;
- condensate drainage;
- the electrical connections;
- the unit’s operating level;
- the manufacturer’s settings.
At AirGreen, we place great importance on a clean finish so that the installation is functional while maintaining a professional appearance around the home.
Common mistakes to avoid when installing a wall-mounted heat pump
Choosing equipment based solely on price
A less expensive heat pump is not always the best investment. Capacity, winter performance, parts availability, and installation quality play a major role.
Incorrect sizing can result in:
- overly frequent operation;
- premature compressor wear;
- uneven comfort;
- higher electricity consumption.
Neglecting the outdoor unit’s location
Installing an outdoor unit in an enclosed area, too close to an obstruction, or directly on the ground without suitable protection can reduce its efficiency.
A proper installation must take into account:
- prevailing wind;
- snow;
- access for maintenance;
- water drainage.
Neglecting HVAC maintenance
Even an excellent heat pump requires regular maintenance.
We generally recommend:
- cleaning the indoor filters;
- annual inspection before the cold season;
- professional cleaning when necessary;
- heating and cooling performance checks.
Regular HVAC maintenance helps maintain energy efficiency and extends the equipment’s lifespan.
Financial assistance programs for a heat pump in Les Coteaux
Depending on the homeowner’s situation, certain financial assistance programs may be available for installing an energy-efficient heat pump.
Eligibility depends in particular on:
- the exact model installed;
- the energy certification;
- the type of building;
- the construction date;
- the current program criteria.
At AirGreen, we support our clients in better understanding the options available for their heating and cooling project.
For residents of Les Coteaux, as well as Montreal, Laval, Longueuil, the North Shore, and the South Shore, a professional assessment helps determine which equipment truly meets the home’s needs.
The AirGreen approach: an installation tailored to every home
Every home has its own characteristics: insulation, orientation, area, occupants’ habits, and existing heating system.
During a visit, we analyze several factors before recommending a solution:
- the area to be cooled;
- the layout of the rooms;
- the areas requiring greater comfort;
- the available electrical supply;
- the ideal location for the indoor and outdoor units.
Our goal is to provide a durable HVAC installation tailored to your needs rather than simply replacing a unit.
This ForestAir E24 installation in Les Coteaux illustrates this approach: a well-matched equipment selection, a clean installation, and careful attention to the technical details that influence daily performance.
A properly installed wall-mounted heat pump for lasting comfort
The installation of a ForestAir E24 wall-mounted heat pump in Les Coteaux is a modern solution for homeowners looking to improve their comfort in both summer and winter.
The performance of an HVAC system depends as much on the quality of the equipment as on the installer’s expertise. An installation carried out according to the manufacturer’s recommendations allows you to fully benefit from inverter technology while ensuring greater long-term reliability.
At AirGreen, we continue to provide heat pump installation, wall-mounted air conditioner, and heating system services throughout the Greater Montreal area, including Laval, Longueuil, the North Shore, and the South Shore.
This installation in Les Coteaux demonstrates our commitment to clean, efficient systems adapted to Quebec’s climate realities.
The job tools
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
How the job unfolds
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
Model, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
Floors and furniture protected, wall plate position marked level, wall opening located.
A single opening, with the slope the drain needs to flow outside.
Set on a stand raised above the snow, with the clearances the manufacturer requires.
Connected, insulated and protected. The opening is then sealed against water, cold air and insects.
A dedicated circuit and an accessible disconnect near the outdoor unit.
Leak test, vacuum, then start-up and a check of heating and cooling.
Remote, modes, filters: we show you the essentials before we leave.
- The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
- The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
- Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
- The wall openingA single opening, with the slope the drain needs to flow outside.
- The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
- Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
- The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
- Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
- The walkthroughRemote, modes, filters: we show you the essentials before we leave.
What we check on a job like this one
Each number is a point we check on site. Switch between summer and winter to watch air and heat move.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
Is your home ready?
Check what applies at your place. A "no" is not a refusal: it is what we sort out during the estimate.
Good habits, once the unit is in place
Six simple habits that keep the unit going. Your list stays on this device.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
The right pages, at the right time
Four statements: true or false?
It all comes down to details you have just seen.
1. In heating mode, the outdoor unit can produce water.
During defrost cycles. That water must drain away without forming ice.
2. You pick the capacity with a simple square-footage rule.
Windows, insulation, orientation and how the room is used all count. Capacity is chosen on site.
3. A multi-zone connects several indoor heads to a single condenser.
One head per room, all on the same condenser. Each room keeps its own temperature.
4. The disconnect can sit behind the patio furniture.
It must stay accessible: it is what shuts the unit off for service.
0 / 4 right answers
What people ask us about this kind of work
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
How cold can it heat?
How much can I save?
How is the LogisVert assistance calculated?
Is it noisy?
The outdoor unit is covered in ice: is that normal?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
An on-site estimate, the right capacity, the right equipment.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).