Installation of a Gree wall-mounted heat pump in Rosemont–La Petite-Patrie
In this Rosemont–La Petite-Patrie home, AirGreen installed a discreet and efficient Gree wall-mounted heat pump, providing four-season comfort in the living room while reducing heating and cooling costs.

Take a tour of the installation
Each number is a point we check on site. Switch between summer and winter to watch air and heat move.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
In this project, our AirGreen team was called in to work on a family home in Rosemont–La Petite-Patrie , Montreal. The homeowners wanted to finally say goodbye to temperature differences between rooms, stifling summer evenings in the living room, and soaring electricity bills every winter.
Our recommendation: the installation of a Gree wall-mounted heat pump , perfectly suited to the configuration of their main living area.
The setting: a family living room in the heart of the house
The room to be air-conditioned and heated is a multi-purpose living room :
-
unobstructed central green wall – ideal for air circulation,
-
relaxation area with leather armchair,
-
large wooden cabinet filled with books, family photos and school supplies.
It's a typical Rosemont room: warm, well-used, where people spend both winter evenings and summer afternoons. Before we worked on it, comfort depended mainly on electric baseboard heaters and an old portable fan. The result:
-
stifling heat in the summer,
-
dry air and cold areas in winter,
-
high energy costs.
The clients wanted a quiet, discreet and efficient heating solution, without major construction work.
Equipment choice: a Gree wall-mounted heat pump
To meet these needs, we proposed a Gree single-zone wall-mounted heat pump , with a capacity of approximately 12,000 BTU , ideal for this living room and adjacent rooms.
Without specifying a precise model number, we are in the range of Gree's new generation wall-mounted heat pumps , designed for:
-
to offer excellent energy efficiency in both air conditioning and heating modes;
-
to function stably during Quebec's cold weather ;
-
maintain a very low noise level , both indoors and outdoors;
-
allow simple control with remote control (temperature, fan speed, night mode, dehumidification, etc.).
The clean white finish of the wall unit blends perfectly with the existing decor: the green wall remains clearly visible, and the heat pump becomes a discreet element, more stylish than an imposing appliance.
Installation details visible in the photo
The photo clearly shows several important aspects of a successful installation:
-
Positioned high up on the central wall
The Gree wall unit is installed near the ceiling, in the center of the wall. This position allows:-
good air extraction at the top of the room;
-
a homogeneous distribution of air conditioning throughout the living area;
-
to avoid direct airflow onto occupants seated in the armchair or near the furniture.
-
-
Wall clear beneath the device
The wall is intentionally left free beneath the heat pump. This ensures:-
optimal clearance in front of the unit;
-
no obstruction of airflow;
-
a more even flow of traffic throughout the living room.
-
-
Harmonious integration into the room
Positioned between the living room area and the large wooden cabinet, the Gree heat pump integrates naturally into family life:-
it does not block any storage space;
-
it does not interfere with traffic flow;
-
It remains visually understated, letting family photos and memories take center stage.
-
-
Discreet management of conduits
The refrigerant lines and condensation drain are routed to the outside through the back of the wall. This makes the connection invisible in the room, reinforcing the impression of an integrated unit rather than a temporary addition.
Work carried out outdoors (summary)
Although the photo only shows the indoor unit, the complete installation of course includes the installation of the Gree outdoor compressor .
Our technicians have:
-
fixed the outdoor unit on a raised support , protected from snow accumulation;
-
installed a protective cover over the exposed refrigerant lines;
-
provided an adequate slope for condensate drainage , preventing any accumulation of water near the house;
-
checked the insulation of the pipes to limit energy losses in winter.
Each step is carried out according to the standards in force in Quebec, respecting the recommendations of Gree.
Performance and comfort: what the family gains on a daily basis
Thanks to this Gree wall-mounted heat pump, the family now benefits from:
1. Four-season comfort
-
Summer : efficient air conditioning of the living room and adjacent rooms, with precise temperature control. No more heavy, humid air during Montreal heat waves.
-
Between seasons : possibility of gentle heating without turning on the baseboards throughout the house.
-
Winter : significant contribution to heating, particularly on cool days, with gentle and constant warmth.
2. Silence and tranquility
Gree wall-mounted heat pumps are designed to be very quiet . In a living room where people watch television, or where children read or play, this is essential. Even in heating mode, the operating noise remains discreet.
3. Energy savings
By transferring a large portion of the heating load to the heat pump, the house reduces:
-
its total electricity consumption ;
-
the use of less efficient electric baseboard heaters;
-
its indirect greenhouse gas emissions , thanks to a better COP.
Over the course of a winter, these savings quickly become visible on the bills.
4. Improved air quality
The filtration system integrated into the Gree wall unit allows for:
-
capture dust and particles;
-
better control of humidity (dehumidification mode in summer);
-
to provide a feeling of fresher, healthier air in the living room.
An installation by AirGreen in Rosemont–La Petite-Patrie
At AirGreen, we don't just put a machine on the wall. We:
-
Let's analyze the configuration of the house (air volume, orientation, partitioning);
-
Let's size the Gree heat pump according to the actual needs;
-
Let's choose the ideal positioning with you for comfort, performance and aesthetics;
-
Let's take the time to explain the daily operation : modes, basic maintenance, filter cleaning, best practices in winter.
In this Rosemont–La Petite-Patrie project, the approach was the same: complete support, from initial advice to commissioning.
Conclusion: A Gree wall-mounted heat pump perfectly integrated into home life
This Gree wall-mounted heat pump installation in Rosemont–La Petite-Patrie perfectly illustrates what we love to achieve:
-
reliable and efficient equipment,
-
a careful integration into a family living space,
-
a tangible improvement in everyday comfort, both summer and winter.
If you live in Greater Montreal and are considering installing a Gree wall-mounted heat pump or other residential HVAC system, our team is here to advise you, offer you the best models for your situation and carry out an installation that meets your expectations.
The big day, step by step
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
Model, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
Floors and furniture protected, wall plate position marked level, wall opening located.
A single opening, with the slope the drain needs to flow outside.
Set on a stand raised above the snow, with the clearances the manufacturer requires.
Connected, insulated and protected. The opening is then sealed against water, cold air and insects.
A dedicated circuit and an accessible disconnect near the outdoor unit.
Leak test, vacuum, then start-up and a check of heating and cooling.
Remote, modes, filters: we show you the essentials before we leave.
- The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
- The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
- Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
- The wall openingA single opening, with the slope the drain needs to flow outside.
- The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
- Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
- The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
- Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
- The walkthroughRemote, modes, filters: we show you the essentials before we leave.
What would it look like at your place?
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
Four mistakes we do not make
Flip each card to see what we do instead.
Your own project, step by step
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
Is your home ready?
Check what applies at your place. A "no" is not a refusal: it is what we sort out during the estimate.
Four statements: true or false?
It all comes down to details you have just seen.
1. In heating mode, the outdoor unit can produce water.
During defrost cycles. That water must drain away without forming ice.
2. You pick the capacity with a simple square-footage rule.
Windows, insulation, orientation and how the room is used all count. Capacity is chosen on site.
3. A multi-zone connects several indoor heads to a single condenser.
One head per room, all on the same condenser. Each room keeps its own temperature.
4. The disconnect can sit behind the patio furniture.
It must stay accessible: it is what shuts the unit off for service.
0 / 4 right answers
What people ask us about this kind of work
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
How cold can it heat?
How much can I save?
How is the LogisVert assistance calculated?
Is it noisy?
The outdoor unit is covered in ice: is that normal?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
Every house has its constraints. We see them before we install.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).
