Project

Installation of a HAXXAIR T2D Mini Split Heat Pump in Oka

See how AirGreen transformed an Oka home with a HAXXAIR T2D Mini Split Heat Pump. Built for Quebec winters and energy-efficient for year-round comfort. Read more!

By AirGreen Climatisation & Chauffage Admin5 min read
Installation of a HAXXAIR T2D Mini Split Heat Pump in Oka
Installation of a HAXXAIR T2D Mini Split Heat Pump in Oka
–chapters in this story
5 minreading time
–type of installation
2024year published
The tour

Take a tour of the installation

Each number is a point we check on site. Switch between summer and winter to watch air and heat move.

Generic diagram: wall-mounted heat pump, indoor and outdoor units

In summer, the outdoor unit rejects the house's heat outside.

Generic illustration of this type of installation, not a survey of this job site. Tap a number.

  1. Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.

  2. The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.

  3. Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.

  4. A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.

  5. The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.

  6. On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.

  7. The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.

The job

Bringing Comfort to Oka Homes: A Detailed Look at Our Latest Installation

At AirGreen, we pride ourselves on delivering top-quality HVAC solutions tailored for the harshest Quebec winters and the warmest summers. One of our latest projects took us to the charming town of Oka, where we installed a state-of-the-art HAXXAIR T2D 12,000 BTU ductless heat pump. This energy-efficient, ultra-quiet unit is a fantastic addition to our portfolio, showcasing our commitment to providing cutting-edge climate control systems for homes across the region.

Why Choose the HAXXAIR T2D for Your Home?

The HAXXAIR T2D Mini Split Heat Pump is not just another HVAC unit—it’s a comprehensive solution designed to tackle the challenges of Quebec’s unpredictable climate. Here’s what makes this model stand out:

  • Cooling Capacity: 12,000 BTU, perfect for maintaining optimal temperatures during the sweltering summer months.
  • Heating Capacity: Reliable down to an impressive -25°C, ensuring warmth even in the depths of winter.
  • Ultra-Quiet Operation: With sound pressure levels as low as 26 dB(A) indoors, this unit operates so silently that it’s barely noticeable, even in the quietest rooms.
  • Energy Efficiency: With a 20.5 SEER rating, the HAXXAIR T2D is designed to significantly reduce energy consumption, translating to savings on Hydro-Québec bills.
  • Eco-Friendly Refrigerant: Utilizes R-410A gas, a refrigerant that aligns with modern environmental standards.

The Oka Installation: A Story of Precision and Excellence

Customizing Comfort for Every Home

Every home presents unique challenges, and this Oka property was no exception. The client’s primary concern was achieving consistent heating and cooling in a space with high ceilings and ample sunlight exposure. After conducting a detailed site assessment, we recommended the HAXXAIR T2D, a model known for its adaptability and high performance.

Installation Highlights

  • Interior Unit Placement: The sleek, wall-mounted interior unit was installed in the living area, strategically positioned to optimize airflow throughout the home. Measuring 32.88 x 8.69 x 11 inches, its compact design blends seamlessly with the room’s aesthetics.
  • Exterior Unit Setup: The outdoor compressor, measuring 31.88 x 11 x 23 inches, was installed on a sturdy bracket to protect it from snow accumulation and ensure efficient operation year-round. The unit’s built-in heating element in the condensation tray prevents ice buildup, a critical feature for Oka’s snowy winters.
  • Efficient Piping and Wiring: Using high-quality 1/4 - 3/8-inch pipes and a voltage setup of 220V, our team ensured the system operates at peak efficiency. The AHRI certification (204628475) guarantees that this unit meets industry standards for energy efficiency and performance.

Technical Excellence

The HAXXAIR T2D’s advanced features, such as its 3D inverter technology and optimized airflow design, allow it to operate efficiently while minimizing noise. During the installation, we ensured that every component—from the Wi-Fi connectivity options to the sound-reduction features—was perfectly calibrated to meet the client’s needs.

Benefits of the HAXXAIR T2D for Quebec Winters

Energy Savings You Can Count On

One of the standout features of the HAXXAIR T2D is its energy-saving capabilities. By combining intergrooved tubing and thinner fins, this unit reduces annual electricity consumption by up to 30%. This means lower utility bills without compromising on comfort.

Built for Extreme Weather

Quebec winters can be unforgiving, but the HAXXAIR T2D is up to the task. Its -25°C heating capacity, coupled with a specialized heating mode that maintains an 8°C temperature, ensures that your home remains safe and cozy even when you’re away for extended periods.

Ultra-Quiet Comfort

For families who value peace and tranquility, the HAXXAIR T2D is an ideal choice. The unit’s sound-dampening technology makes it virtually silent during operation, whether you’re heating your home on a snowy winter night or cooling it on a scorching summer day.

Why Oka Homeowners Love AirGreen

As a trusted name in HVAC installations across Montreal, Laval, Longueuil, and the Rive Sud and Rive Nord regions, AirGreen is known for its dedication to quality and customer satisfaction. Here’s why homeowners continue to choose us:

  • Expertise in Complex Installations: Our team has extensive experience handling diverse installation challenges, ensuring that every system we install operates at peak performance.
  • Top-Quality Products: We partner with leading brands like HAXXAIR to bring you the best in HVAC technology.
  • Outstanding Customer Support: From the initial consultation to post-installation support, we’re with you every step of the way.

Future-Proof Your Home with AirGreen

Whether you’re upgrading your current HVAC system or installing one for the first time, AirGreen offers solutions that are not only efficient and reliable but also tailored to your home’s unique needs. The HAXXAIR T2D Mini Split Heat Pump installed in Oka is a testament to our commitment to quality and innovation.

Key Specifications at a Glance

  • Model: HAXXAIR T2D
  • Cooling Capacity: 12,000 BTU
  • Heating Capacity: -25°C
  • Dimensions (Interior): 32.88 x 8.69 x 11 inches
  • Dimensions (Exterior): 31.88 x 11 x 23 inches
  • Energy Efficiency: 20.5 SEER
  • Refrigerant: R-410A
  • Sound Levels: 26 dB(A) indoors, ultra-quiet mode available
  • Warranty: 5 years on the compressor and parts, with optional 10-year extended coverage

Contact Us Today

Looking for a dependable, energy-efficient heating and cooling solution for your home? Trust AirGreen to deliver the comfort and quality you deserve. Call us now to schedule a consultation and take the first step toward a cozier, more energy-efficient home.

The steps

The big day, step by step

The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.

Step 1 of 9The on-site estimate

We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.

  1. The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
  2. The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
  3. Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
  4. The wall openingA single opening, with the slope the drain needs to flow outside.
  5. The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
  6. Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
  7. The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
  8. Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
  9. The walkthroughRemote, modes, filters: we show you the essentials before we leave.
Your numbers

What would it look like at your place?

Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.

Size checkYour baseboards, in BTU/h
–BTU/h of installed electric heat

    Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.

    Mistakes avoided

    Four mistakes we do not make

    Flip each card to see what we do instead.

    Going further

    Your own project, step by step

    Through the seasons

    What to do, season by season

    Three habits per season for this unit. They take a few minutes and prevent many calls.

    • Clean the indoor unit's filters.
    • Clear leaves and debris left on the outdoor unit by winter.
    • Test cooling before the first hot days.
    At your place

    Is your home ready?

    Check what applies at your place. A "no" is not a refusal: it is what we sort out during the estimate.

    0 / 6 checked
    True or false

    Four statements: true or false?

    It all comes down to details you have just seen.

    1. In heating mode, the outdoor unit can produce water.

    2. You pick the capacity with a simple square-footage rule.

    3. A multi-zone connects several indoor heads to a single condenser.

    4. The disconnect can sit behind the patio furniture.

    Frequently asked questions

    What people ask us about this kind of work

    12 questions
    Does a wall-mounted heat pump heat in winter?
    Yes, it heats and cools. Its capacity drops in very cold weather; the operating range depends on the model and is listed on its spec sheet.
    Wall-mounted or multi-zone: how do I choose?
    One wall head and one condenser outside: the direct solution for a room or an open area. For two to five rooms, a multi-zone puts one head in each room on a single condenser.
    Where does the outdoor unit go?
    Where it stays above the snow, clear and accessible, away from walkways. We decide it with you during the estimate.
    Are there grants?
    Depending on the model and your situation, assistance programs may apply, including Hydro-Québec's LogisVert. AirGreen checks the model number before quoting an amount. See the grants.
    Do I need a permit?
    Rules vary from city to city: location, distances, noise. See permits and by-laws, and we check for your address.
    How cold can it heat?
    It depends on the model. According to Hydro-Québec, newer models work down to a temperature between −15 °C and −25 °C, and some cold-climate models are certified lower. The minimum temperature is on each unit's spec sheet.
    How much can I save?
    Hydro-Québec says a heat pump can be up to three times more efficient than baseboards for heating in the colder months. The result depends on the house, the climate and how it is used.
    How is the LogisVert assistance calculated?
    For ENERGY STAR cold-climate certified heat pumps, Hydro-Québec lists assistance of $120 per 1,000 BTU/h of heating capacity at −8 °C. AirGreen checks the exact model before quoting an amount; only Hydro-Québec confirms the assistance granted. See the grants.
    Is it noisy?
    The sound level depends on the model and is listed in decibels on each unit's spec sheet. Location matters too: when possible, we avoid putting the outdoor unit under a bedroom window.
    The outdoor unit is covered in ice: is that normal?
    Some frost is: the unit runs defrost cycles. Never hit the ice. If the unit stays iced up or stops heating, call us.
    Does AirGreen hold the required licences?
    Yes. AirGreen holds RBQ licence 5645-9605-01, subclasses 15.8 Ventilation, 15.10 Refrigeration and 16 Electricity.
    Is the estimate free?
    Yes. The on-site estimate is free and the quote follows within 24 hours. Book my free estimate.

    Could this job help a neighbour?

    Share
    Similar projects

    More jobs to see, near you

    By town, by equipment or by region: browse more than 4,700 published projects.

    Each dot: a town where AirGreen has published projects. The glowing dot: this job.

    All our projects

    Your project

    Every house has its constraints. We see them before we install.

    The on-site estimate is free and the quote follows within 24 hours.

    • RBQ licence5645-9605-01 · 15.8, 15.10, 16
    • EstimateOn site, free
    • QuoteWithin 24 hours

    Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).

    Leave a comment