Project

Installation of a SHARP ZHU1 Ductless Heat Pump in Saint-Léonard

Experience the comfort of a SHARP ZHU1 heat pump! See how AirGreen transformed a Saint-Léonard home with this energy-efficient, eco-friendly system eligible for a $2,268 LogisVert Grant.

By AirGreen Climatisation & Chauffage Admin5 min read
Installation of a SHARP ZHU1 Ductless Heat Pump in Saint-Léonard
Installation of a SHARP ZHU1 Ductless Heat Pump in Saint-Léonard
–chapters in this story
5 minreading time
–type of installation
2024year published
The tour

Take a tour of the installation

Each number is a point we check on site. Switch between summer and winter to watch air and heat move.

Generic diagram: wall-mounted heat pump, indoor and outdoor units

In summer, the outdoor unit rejects the house's heat outside.

Generic illustration of this type of installation, not a survey of this job site. Tap a number.

  1. Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.

  2. The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.

  3. Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.

  4. A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.

  5. The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.

  6. On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.

  7. The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.

The job

A Seamless HVAC Solution for Comfort and Efficiency

Transforming Homes in Saint-Léonard with the SHARP ZHU1 Heat Pump

At AirGreen, we pride ourselves on delivering not just installations but tailored solutions that align with our customers' needs, the environment, and advanced technology. Our recent project in Saint-Léonard showcases the installation of a 12,000 BTU SHARP ZHU1 ductless heat pump—a remarkable choice for year-round climate control. Combining state-of-the-art Japanese innovation, energy efficiency, and exceptional functionality, this system ensures comfort even in Quebec's harsh winters.

Why the SHARP ZHU1 Stands Out

The SHARP ZHU1 heat pump is no ordinary HVAC system. Designed to handle temperatures as low as -27°C, it offers unparalleled energy efficiency with a SEER rating of 25.0. Its use of the eco-friendly R-32 refrigerant not only reduces environmental impact but also optimizes energy consumption. With the inclusion of WiFi connectivity, homeowners can easily monitor and control their system remotely, ensuring ultimate convenience.

Key specifications include:

  • Cooling Capacity: 12,000 BTU
  • Heating Capacity: 12,000 BTU (-27°C)
  • Interior Dimensions: 41.42 x 9.80 x 12.44 inches
  • Exterior Dimensions: 30.72 x 10.59 x 21.25 inches
  • Noise Levels: 22-44 dB(A) indoors, 49 dB(A) outdoors
  • Warranty: 10 years (Compressor, Parts, and Labor)

This unit is not only Energy Star® certified but also eligible for a $2,268 LogisVert Grant by Hydro-Québec, the highest rebate available for a 12,000 BTU heat pump.


Installation of a SHARP ZHU1 Ductless Heat Pump in Saint-Léonard

A Tailored Installation Process

Our team was thrilled to assist a homeowner in Saint-Léonard who sought an efficient and environmentally friendly heating and cooling solution. The unique placement of the property—nestled between two narrow walls—required precision and expertise. Our technicians meticulously planned the installation to ensure the outdoor unit was securely mounted while optimizing airflow and minimizing noise.

The indoor unit was positioned to maximize the Coanda airflow effect, directing air along walls and ceilings to provide even temperature distribution throughout the home. This placement not only enhanced comfort but also utilized the system's Plasmacluster technology to purify the air by eliminating airborne viruses, mold, and odors.


Advanced Features That Make a Difference

Plasmacluster Technology for Cleaner Air

One standout feature of the SHARP ZHU1 is its Plasmacluster ion technology, which mimics natural air purification processes. By releasing positive and negative ions, this system neutralizes harmful airborne particles, ensuring the air inside your home is as fresh as the outdoors.

Coanda Airflow Control

Using the Coanda effect, the SHARP ZHU1 directs air along strategic surfaces to avoid direct drafts while maintaining uniform temperature throughout the space. Whether cooling during summer or heating during winter, this feature ensures ultimate comfort.

Smart Connectivity and Energy Monitoring

With built-in WiFi, homeowners can control their system via a smartphone app. Features like real-time temperature monitoring, energy usage tracking, and motion detection optimize efficiency and convenience. Additionally, the Auto Changeover mode seamlessly switches between heating and cooling based on outdoor temperatures, making seasonal transitions effortless.

Eco-Friendly Innovation

The use of R-32 refrigerant not only reduces greenhouse gas emissions but also enhances the system's efficiency by approximately 10%. This innovative refrigerant aligns with AirGreen’s commitment to sustainability and helps homeowners reduce their carbon footprint.


Challenges Met with Expertise

The narrow alley in which the outdoor unit was installed posed a unique challenge. Our team utilized specialized mounting brackets to securely position the unit, ensuring optimal performance while maintaining the aesthetic appeal of the property. We also reinforced the piping system with anti-corrosive materials to withstand Quebec’s extreme weather conditions.

The interior unit was mounted in the central living area to provide even airflow across multiple rooms. Thanks to the Multi Space Function, the SHARP ZHU1 distributes air harmoniously across zones, ensuring consistent comfort throughout the home.


Why Choose AirGreen for Your HVAC Needs?

When it comes to HVAC installations, precision and expertise matter. At AirGreen, we combine cutting-edge technology with a customer-centric approach to deliver solutions that exceed expectations. Here’s why homeowners in Montreal, Laval, Longueuil, and the Rive Nord and Sud trust us:

  • Expert Technicians: Our certified professionals are trained to handle even the most challenging installations.
  • Comprehensive Support: From selecting the right system to claiming grants, we guide you every step of the way.
  • Sustainability Focus: We prioritize eco-friendly solutions that reduce energy consumption and environmental impact.
  • Unmatched Warranty: With a 10-10-10 warranty, you can enjoy peace of mind knowing your investment is protected.

Maximizing the LogisVert Grant

One of the highlights of this project was helping the homeowner qualify for the $2,268 LogisVert Grant by Hydro-Québec. This grant represents a significant cost saving, making the SHARP ZHU1 not only an environmentally sound choice but also a financially savvy one. Our team handled all the necessary paperwork, ensuring a hassle-free process for the homeowner.


Customer Satisfaction: Our Top Priority

The homeowner in Saint-Léonard was delighted with the outcome. They now enjoy a comfortable, energy-efficient home with cleaner air and lower utility bills. The sleek design of the SHARP ZHU1 adds a modern touch to their living space, while its quiet operation ensures peace and tranquility.


Interested in Upgrading Your HVAC System?

If you’re looking for a reliable, energy-efficient solution for your home, the SHARP ZHU1 ductless heat pump is an excellent choice. At AirGreen, we’re here to provide personalized recommendations, professional installations, and ongoing support. Contact us today to learn how we can transform your home with cutting-edge HVAC technology.

The steps

The big day, step by step

The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.

Step 1 of 9The on-site estimate

We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.

  1. The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
  2. The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
  3. Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
  4. The wall openingA single opening, with the slope the drain needs to flow outside.
  5. The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
  6. Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
  7. The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
  8. Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
  9. The walkthroughRemote, modes, filters: we show you the essentials before we leave.
Your numbers

What would it look like at your place?

Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.

Size checkYour baseboards, in BTU/h
–BTU/h of installed electric heat

    Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.

    Mistakes avoided

    Four mistakes we do not make

    Flip each card to see what we do instead.

    Going further

    Your own project, step by step

    Through the seasons

    What to do, season by season

    Three habits per season for this unit. They take a few minutes and prevent many calls.

    • Clean the indoor unit's filters.
    • Clear leaves and debris left on the outdoor unit by winter.
    • Test cooling before the first hot days.
    At your place

    Is your home ready?

    Check what applies at your place. A "no" is not a refusal: it is what we sort out during the estimate.

    0 / 6 checked
    True or false

    Four statements: true or false?

    It all comes down to details you have just seen.

    1. In heating mode, the outdoor unit can produce water.

    2. You pick the capacity with a simple square-footage rule.

    3. A multi-zone connects several indoor heads to a single condenser.

    4. The disconnect can sit behind the patio furniture.

    Frequently asked questions

    What people ask us about this kind of work

    12 questions
    Does a wall-mounted heat pump heat in winter?
    Yes, it heats and cools. Its capacity drops in very cold weather; the operating range depends on the model and is listed on its spec sheet.
    Wall-mounted or multi-zone: how do I choose?
    One wall head and one condenser outside: the direct solution for a room or an open area. For two to five rooms, a multi-zone puts one head in each room on a single condenser.
    Where does the outdoor unit go?
    Where it stays above the snow, clear and accessible, away from walkways. We decide it with you during the estimate.
    Are there grants?
    Depending on the model and your situation, assistance programs may apply, including Hydro-Québec's LogisVert. AirGreen checks the model number before quoting an amount. See the grants.
    Do I need a permit?
    Rules vary from city to city: location, distances, noise. See permits and by-laws, and we check for your address.
    How cold can it heat?
    It depends on the model. According to Hydro-Québec, newer models work down to a temperature between −15 °C and −25 °C, and some cold-climate models are certified lower. The minimum temperature is on each unit's spec sheet.
    How much can I save?
    Hydro-Québec says a heat pump can be up to three times more efficient than baseboards for heating in the colder months. The result depends on the house, the climate and how it is used.
    How is the LogisVert assistance calculated?
    For ENERGY STAR cold-climate certified heat pumps, Hydro-Québec lists assistance of $120 per 1,000 BTU/h of heating capacity at −8 °C. AirGreen checks the exact model before quoting an amount; only Hydro-Québec confirms the assistance granted. See the grants.
    Is it noisy?
    The sound level depends on the model and is listed in decibels on each unit's spec sheet. Location matters too: when possible, we avoid putting the outdoor unit under a bedroom window.
    The outdoor unit is covered in ice: is that normal?
    Some frost is: the unit runs defrost cycles. Never hit the ice. If the unit stays iced up or stops heating, call us.
    Does AirGreen hold the required licences?
    Yes. AirGreen holds RBQ licence 5645-9605-01, subclasses 15.8 Ventilation, 15.10 Refrigeration and 16 Electricity.
    Is the estimate free?
    Yes. The on-site estimate is free and the quote follows within 24 hours. Book my free estimate.

    Could this job help a neighbour?

    Share
    Similar projects

    More jobs to see, near you

    By town, by equipment or by region: browse more than 4,700 published projects.

    Each dot: a town where AirGreen has published projects. The glowing dot: this job.

    All our projects

    Your project

    Every house has its constraints. We see them before we install.

    The on-site estimate is free and the quote follows within 24 hours.

    • RBQ licence5645-9605-01 · 15.8, 15.10, 16
    • EstimateOn site, free
    • QuoteWithin 24 hours

    Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).

    Leave a comment