Installation of a SHARP ZHU1 12,000 BTU Ductless Heat Pump in Beaconsfield
Learn how AirGreen brought comfort and energy efficiency to a Beaconsfield home with the advanced SHARP ZHU1 heat pump. Eco-friendly, powerful, and grant-eligible—find out more!
- City
- Region
- Equipment
- Brand
- Challenges
- Published
The job on one screen
The article, chapter by chapter
Revolutionizing Home Comfort: Our Latest Installation in Beaconsfield
At AirGreen, we pride ourselves on offering cutting-edge HVAC solutions tailored to the diverse and demanding climate of Quebec. Recently, we had the privilege of installing a state-of-the-art SHARP ZHU1 12,000 BTU Ductless Heat Pump in a charming Beaconsfield residence. This isn’t just another HVAC project—it’s a story of innovation, energy efficiency, and enhanced comfort.
Meeting the Needs of Beaconsfield’s Residents
Beaconsfield, known for its stunning landscapes and family-oriented community, is no stranger to the challenges posed by Quebec’s extreme weather. From frigid winters to humid summers, maintaining a comfortable indoor climate year-round is essential. When our client reached out, their primary concern was finding an energy-efficient system capable of performing reliably even in sub-zero temperatures. The SHARP ZHU1 proved to be the perfect solution.
Why the SHARP ZHU1? A Heat Pump Designed for Quebec’s Climate
1. Unmatched Efficiency with R-32 Refrigerant
The SHARP ZHU1 series is equipped with the latest R-32 refrigerant, a cutting-edge technology designed to reduce greenhouse gas emissions by 10% compared to traditional refrigerants. This refrigerant not only minimizes environmental impact but also enhances energy efficiency—an important factor for eco-conscious homeowners.
2. Extreme Cold Performance
One of the standout features of this heat pump is its ability to operate efficiently in temperatures as low as -27°C, making it a reliable option for Quebec’s harsh winters. This is further certified by its Energy Star® Cold Climate designation, ensuring optimal performance when you need it most.
3. Compact Yet Powerful Design
The indoor unit measures 41.42 x 9.80 x 12.44 inches, while the outdoor unit is equally compact at 30.72 x 10.59 x 21.25 inches. This makes the system ideal for homes with limited space without compromising on performance.
4. WiFi Connectivity for Total Control
With built-in WiFi, the SHARP ZHU1 offers complete control via smartphone. Whether you're adjusting the temperature or monitoring energy consumption, convenience is at your fingertips.
Highlights of the Installation Process
Custom Solutions for Optimal Performance
Our team carefully evaluated the layout of the Beaconsfield home to determine the best placement for both the indoor and outdoor units. By positioning the indoor unit strategically in the living room, we ensured even airflow across the most frequented areas. Meanwhile, the outdoor compressor was installed in a location that maximized efficiency while minimizing noise levels (a quiet 49 dB(A)).
Meticulous Attention to Detail
Every installation at AirGreen adheres to strict quality standards. For this project, we used 1/4 - 3/8 piping to connect the indoor and outdoor units, ensuring seamless performance. The system was also tested to confirm its 25.0 SEER efficiency rating, which translates to significant energy savings for the homeowner.
Grant Eligibility: A Major Bonus
This installation qualifies for a $2,268 LogisVert Grant—the highest rebate available for any 12,000 BTU system offered by Hydro-Québec. Not only does this make the SHARP ZHU1 an environmentally responsible choice, but it also offers incredible financial incentives.
Innovative Features That Set the SHARP ZHU1 Apart
Plasmacluster Air Purification Technology
The SHARP ZHU1 is equipped with Plasmacluster technology, a proprietary air purification system that eliminates airborne viruses, mold, and allergens. This feature ensures that every breath you take is clean and healthy, making it ideal for families with children or individuals prone to allergies.
Nature-Inspired Fan Blades
Inspired by the aerodynamic design of dragonfly wings, the indoor unit’s fan blades improve airflow by 30%. Meanwhile, the outdoor compressor features fan blades modeled after the golden eagle and albatross, enhancing efficiency by 20%.
Coanda Airflow Control
This innovative technology ensures uniform temperature distribution throughout the home. By directing air along walls and ceilings, the system prevents uncomfortable drafts, creating a more pleasant living environment.
Client Satisfaction: The Heart of Our Business
Our Beaconsfield client was thrilled with the results. Not only did the SHARP ZHU1 exceed their expectations in terms of performance and efficiency, but the installation process was also seamless and stress-free. At AirGreen, we’re not just selling heat pumps—we’re building trust and delivering peace of mind.
Why Choose AirGreen for Your HVAC Needs?
- Expertise: With years of experience serving Montreal, Laval, Longueuil, and the surrounding areas, we understand the unique HVAC requirements of Quebec homes.
- Premium Products: We partner with industry leaders like SHARP to offer state-of-the-art systems that combine innovation, reliability, and efficiency.
- Exceptional Service: From consultation to installation and beyond, our team is dedicated to providing unparalleled customer care.
- Rebate Assistance: We guide our clients through the process of applying for grants like the LogisVert rebate, ensuring they maximize their savings.
Transform Your Home with AirGreen
Whether you're in Beaconsfield, Montreal, Laval, or the South Shore, AirGreen is here to provide customized HVAC solutions that enhance your comfort while reducing your environmental footprint. Contact us today to learn more about our services and discover how we can transform your living space.
The job tools
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
How the job unfolds
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
Model, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
Floors and furniture protected, wall plate position marked level, wall opening located.
A single opening, with the slope the drain needs to flow outside.
Set on a stand raised above the snow, with the clearances the manufacturer requires.
Connected, insulated and protected. The opening is then sealed against water, cold air and insects.
A dedicated circuit and an accessible disconnect near the outdoor unit.
Leak test, vacuum, then start-up and a check of heating and cooling.
Remote, modes, filters: we show you the essentials before we leave.
- The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
- The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
- Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
- The wall openingA single opening, with the slope the drain needs to flow outside.
- The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
- Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
- The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
- Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
- The walkthroughRemote, modes, filters: we show you the essentials before we leave.
What we check on a job like this one
Each number is a point we check on site. Switch between summer and winter to watch air and heat move.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
Is your home ready?
Check what applies at your place. A "no" is not a refusal: it is what we sort out during the estimate.
Good habits, once the unit is in place
Six simple habits that keep the unit going. Your list stays on this device.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
The right pages, at the right time
Four statements: true or false?
It all comes down to details you have just seen.
1. In heating mode, the outdoor unit can produce water.
During defrost cycles. That water must drain away without forming ice.
2. You pick the capacity with a simple square-footage rule.
Windows, insulation, orientation and how the room is used all count. Capacity is chosen on site.
3. A multi-zone connects several indoor heads to a single condenser.
One head per room, all on the same condenser. Each room keeps its own temperature.
4. The disconnect can sit behind the patio furniture.
It must stay accessible: it is what shuts the unit off for service.
0 / 4 right answers
What people ask us about this kind of work
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
How cold can it heat?
How much can I save?
How is the LogisVert assistance calculated?
Is it noisy?
The outdoor unit is covered in ice: is that normal?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
An on-site estimate, the right capacity, the right equipment.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).