Installation of a Haxxair T2D Mini Split in Terrebonne
Upgrade your home with the Haxxair T2D Mini Split for quiet, efficient heating and cooling. See how AirGreen is transforming indoor comfort in Terrebonne!
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
Harnessing Comfort and Efficiency with Haxxair's Latest HVAC Solution
At AirGreen, we pride ourselves on delivering state-of-the-art HVAC solutions that not only meet the needs of our clients but also enhance their living environments through advanced technology and reliable performance. Our recent installation of the Haxxair T2D Mini Split system in Terrebonne is a testament to our commitment to excellence and our dedication to sustainable energy practices.
Project Overview
The project involved the installation of a Haxxair T2D Mini Split at a residential property in Terrebonne. This system is renowned for its 18,000 BTU cooling capacity and exceptional 23.2 SEER efficiency, making it one of the most energy-efficient units on the market. The installation was part of a strategic upgrade to improve the home's environmental footprint and reduce annual energy costs.
Innovative Features of the Haxxair T2D
Ultra-Quiet Performance
One of the standout features of the Haxxair T2D is its ultra-quiet mode. Designed with the latest advancements in airflow technology and acoustics, the unit ensures minimal noise disruption. This feature is particularly beneficial for families, allowing for undisturbed sleep, even when the unit operates at full capacity during nighttime.
Energy Savings with 3D Inverter Technology
The Haxxair T2D incorporates 3D inverter technology that optimizes the operation of the heat pump, significantly reducing power consumption. Our clients in Terrebonne can expect to see a reduction of up to 30% in their annual electricity bills, a benefit that aligns perfectly with the growing trend of energy-efficient home upgrades.
Enhanced Winter Performance
Equipped with a built-in heating element in the condensation tray, the Haxxair T2D is ideally suited for the harsh winters of Montreal and surrounding areas. This feature prevents ice and snow accumulation, ensuring consistent performance and reliability even in sub-zero temperatures.
Special Heating Mode for Freezing Conditions
The special heating mode of the Haxxair T2D offers peace of mind for homeowners, especially those who spend time away from their residences during the coldest months. By maintaining a minimum temperature of 8°C, it prevents the internal environment from freezing, safeguarding the structural integrity and comfort of the home.
The Installation Process
Our skilled technicians at AirGreen carried out the installation with meticulous attention to detail. The process involved setting up the indoor unit with dimensions of 43.31 x 9.63 x 12.75 inches and the outdoor unit measuring 33.88 x 12.19 x 25.56 inches. Proper placement and secure mounting of both units were critical to achieving optimal performance and aesthetics.
The use of R-410A refrigerant ensures that the system is not only efficient but also environmentally friendly. Coupled with a 10-year warranty on both compressor and parts, our clients are assured of a long-term, worry-free experience.
Client Satisfaction and Future Outlook
The feedback from our client in Terrebonne was overwhelmingly positive. They highlighted the immediate improvement in indoor air quality and the enhanced comfort levels throughout their home. The energy savings and quiet operation of the Haxxair T2D have set a new standard for residential HVAC solutions in the region.
As AirGreen continues to advocate for energy-efficient technologies, we remain committed to bringing the latest innovations to our clients. The successful installation of the Haxxair T2D Mini Split in Terrebonne is a shining example of how modern technology can be harnessed to create comfortable, sustainable, and energy-efficient living spaces.
How it goes, from the first call to the end
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
Model, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
Floors and furniture protected, wall plate position marked level, wall opening located.
A single opening, with the slope the drain needs to flow outside.
Set on a stand raised above the snow, with the clearances the manufacturer requires.
Connected, insulated and protected. The opening is then sealed against water, cold air and insects.
A dedicated circuit and an accessible disconnect near the outdoor unit.
Leak test, vacuum, then start-up and a check of heating and cooling.
Remote, modes, filters: we show you the essentials before we leave.
- The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
- The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
- Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
- The wall openingA single opening, with the slope the drain needs to flow outside.
- The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
- Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
- The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
- Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
- The walkthroughRemote, modes, filters: we show you the essentials before we leave.
And at your place?
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
Which type of equipment for your project?
Pick what looks like your need.
Four mistakes we do not make
Flip each card to see what we do instead.
What people ask us about this kind of work
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
How cold can it heat?
How much can I save?
How is the LogisVert assistance calculated?
Is it noisy?
The outdoor unit is covered in ice: is that normal?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
Useful pages for what comes next
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
Tell us about your house. We come and see it for free.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).