Installation of a Tosot APEX Central Heat Pump in Beaconsfield, Montreal
Dive into AirGreen’s latest success story: a smooth transition to full electric heating & cooling in Beaconsfield with the powerful Tosot APEX! Your comfort is our mission.
- City
- Region
- Equipment
- Brand
- Challenges
- Published
The job on one screen
The article, chapter by chapter
A Seamless Transition to a Fully Electric Heating and Cooling System
The Installation Story in Beaconsfield
In the picturesque neighborhood of Beaconsfield, Montreal, we at AirGreen recently completed an installation that embodies efficiency and customer satisfaction. Our clients, a discerning household, were looking for a powerful and reliable system to heat and cool their entire home. Their old oil system was outdated, and with the attractive $5000 federal rebate available, switching to a fully electric system was an obvious choice.
Why Tosot APEX?
The Tosot APEX Central Heat Pump was the chosen hero of this story, a model known for its robust performance and reliability. With a substantial size of 5 TONNES and heating capacity that withstands cold down to -30°C, it’s a powerhouse in an elegant package. Here’s a quick overview of its impressive specifications:
- Heating Capacity: -30°C
- Cooling Capacity: 60,000 BTU
- Efficiency: 17.5 SEER, HSPF: 11.0, EER: 9.0
- Dimensions (L x W x H): 37 x 12 x 56
- Sound Pressure Level: 60.0 dB(A)
- Voltage: 220V
- Warranty: 10-10-10 extension available
Smooth Installation Process
Our experienced team found the installation process straightforward, thanks to the existing ducts in the home. The focus was on removing the old oil tank and ushering in the new era of fully electric heating and cooling. Minimal adjustments were needed, and these were carried out at no additional cost to our delighted clients.
Smart and Efficient Living
The new system not only provides efficient heating down to -30°C but is also equipped with a 100% electric furnace for those extra cold days. Clients can now remotely control their home’s temperature with a newly installed WiFi thermostat, a feature they greatly appreciate, especially when returning from their summer cottage to a perfectly cooled home.
Customer Delight
Our clients are thrilled with the seamless transition, the efficient performance of their new Tosot APEX, and the professional service provided by AirGreen. They now enjoy a comfortable, temperature-controlled environment year-round, with the added bonus of energy and cost savings.
Why Choose AirGreen?
At AirGreen, we pride ourselves on delivering top-quality HVAC services in Montreal, Laval, Longueuil, Rive-Nord, and Rive-Sud. Our installation gallery showcases the scope and quality of our work, providing potential clients with visual proof of our expertise and commitment to customer satisfaction.
Conclusion
This installation in Beaconsfield is a testament to AirGreen’s dedication to providing efficient, reliable, and customer-focused HVAC solutions. With the Tosot APEX Central Heat Pump, our clients now enjoy a comfortable, smart, and energy-efficient home, supported by our skilled and experienced team.
The job tools
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
How the job unfolds
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the ducts, the current indoor module, the electrical panel and the planned spot for the outdoor unit.
The equipment combination, capacity and price, in writing. We check whether the combination qualifies for assistance programs.
Access protected, old unit disconnected and removed when it is being replaced.
Electric furnace or air handler, with its coil, connected to the supply and return ducts.
On a level base, raised above the snow, with free space all around.
Insulated, they enter through a sealed opening and run to the indoor coil.
Dedicated circuits, accessible disconnect, a thermostat that works with the heat pump and the backup heat.
Leak test, vacuum, start-up, airflow check and a test of both modes.
Filter, thermostat, backup heat in extreme cold: what to know before winter.
- The on-site estimateWe look at the ducts, the current indoor module, the electrical panel and the planned spot for the outdoor unit.
- The quoteThe equipment combination, capacity and price, in writing. We check whether the combination qualifies for assistance programs.
- Getting readyAccess protected, old unit disconnected and removed when it is being replaced.
- The indoor moduleElectric furnace or air handler, with its coil, connected to the supply and return ducts.
- The outdoor unitOn a level base, raised above the snow, with free space all around.
- The refrigerant linesInsulated, they enter through a sealed opening and run to the indoor coil.
- Electrical and thermostatDedicated circuits, accessible disconnect, a thermostat that works with the heat pump and the backup heat.
- Tests and start-upLeak test, vacuum, start-up, airflow check and a test of both modes.
- The walkthroughFilter, thermostat, backup heat in extreme cold: what to know before winter.
What we check on a job like this one
Each number is a point we check on site. Switch between summer and winter to watch air and heat move.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
It captures or rejects heat outside. It sits on a level base, above the snow, with free space all around.
The insulated refrigerant lines enter the house through a sealed opening and run to the indoor coil.
A shut-off switch near the outdoor unit isolates it safely for service.
Sitting on the indoor module, it moves heat between the house air and the refrigerant.
Electric furnace or air handler: its fan pushes air through the ducts. The electric backup takes over in extreme cold.
Supply ducts bring air to the rooms; returns bring it back to the unit. Their condition matters as much as the unit's.
It protects the coil and the fan. A dirty filter cuts airflow, so it gets checked regularly.
It runs the heat pump and the backup heat. It must be compatible with the installed system.
Is your home ready?
Check what applies at your place. A "no" is not a refusal: it is what we sort out during the estimate.
Good habits, once the unit is in place
Six simple habits that keep the unit going. Your list stays on this device.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Check the indoor module's filter.
- Clear winter debris from the outdoor unit.
- Test cooling before the heat arrives.
- Check the filter more often in peak season.
- Keep registers and returns clear.
- Watch condensate drainage near the coil.
- Change or clean the filter.
- Test heating and backup heat before the cold.
- Book periodic maintenance.
- Clear snow around the outdoor unit.
- Store nothing in front of the indoor module.
- Note any unusual noise or smell and call us.
The right pages, at the right time
Four statements: true or false?
It all comes down to details you have just seen.
1. A central heat pump uses the house's ducts.
It connects to the existing ducts to heat and cool everywhere.
2. In extreme cold, electric backup heat can take over.
The indoor module (furnace or air handler) works with the heat pump and takes over in extreme cold.
3. The filter only gets changed when the unit breaks down.
A dirty filter cuts airflow. It gets checked regularly.
4. You can reuse the old unit's size without checking.
The house may have changed: insulation, windows, added rooms. Capacity is confirmed on site.
0 / 4 right answers
What people ask us about this kind of work
Can I keep my current ducts?
What happens in extreme cold?
Furnace, air handler, ducted: what is the difference?
Are there grants?
Do I need a permit?
How much can I save?
How is the LogisVert assistance calculated?
Will my current thermostat work?
Central or wall units: which one?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
An on-site estimate, the right capacity, the right equipment.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).