Installation of a Gree FreeMatch Extreme Double Zone Heat Pump in Anjou, Montreal
Heating up Anjou, one home at a time! Learn how our Gree FreeMatch Extreme installations forge community ties and offer great savings. Choose AirGreen today!
- City
- Region
- Equipment
- Brand
- Challenges
- Published
The job on one screen
The article, chapter by chapter
A Harmonious Blend of Efficiency and Community Savings
When it comes to heating and cooling solutions, precision, efficiency, and community impact matter. At AirGreen, we are thrilled to showcase a recent highlight from our portfolio—a dual installation of the Gree FreeMatch Extreme Double Zone Heat Pumps for neighboring residents in Anjou, Montreal. This project not only exemplifies our commitment to top-tier HVAC solutions but also reflects our dedication to fostering community through thoughtful service offers.
Project Overview: Dual Installation with a Twist
In the picturesque borough of Anjou, two neighbors approached AirGreen with a common goal: to enhance their home comfort systems before the harsh Canadian winter. Our solution? The Gree FreeMatch Extreme Double Zone Heat Pump, known for its robust performance and reliability. Here's what makes these installations stand out:
- Dual Installation: We installed two separate systems for each home, optimizing their individual heating and cooling needs while maintaining aesthetic consistency across the properties.
- Community Discount: Leveraging the proximity of the installations, we offered a substantial group discount, reinforcing the value of community and mutual benefit among neighbors.
- Grant Eligibility: Each system qualifies for a $2,148 LogisVert Grant from Hydro-Québec, providing not only a top-notch heating solution but also a smart financial choice.
Unpacking the Gree FreeMatch Extreme
The Gree FreeMatch Extreme is a powerhouse in the realm of Double Zone Heat Pumps, offering unmatched performance and energy efficiency. Key features include:
- Cooling and Heating Capacity: With a 24,000 BTU compressor and two 12,000 BTU indoor units, it ensures optimal temperature control.
- Impressive Durability: Features like a reinforced steel box and fins with anti-corrosion coating guarantee longevity.
- Smart Technology: Equipped with WiFi capabilities, it allows for easy management of settings via smartphone.
- Energy Efficiency: Boasting an Energy Star certification and an impressive 23.0 SEER rating, this system is designed for eco-conscious efficiency.
- Extended Warranty: A 10-year warranty on parts, compressor, and labor underscores our commitment to long-term customer satisfaction.
Installation Insights: A Story of Precision and Expertise
The installation process in Anjou was a testament to AirGreen's precision and expertise. Each step, from the initial assessments to the final tweaks, was carried out with meticulous attention to detail. The installations were strategically planned to minimize disruption, with a focus on integrating the units seamlessly into the existing structures of the homes. Our team's agility in navigating the complexities of a dual installation while maintaining high standards of quality and efficiency was instrumental in the project's success.
Why Choose AirGreen?
Choosing an HVAC provider is a decision that impacts not just the immediate comfort of your home but also its long-term energy efficiency and sustainability. Here’s why AirGreen stands out:
- Community Focus: We believe in the power of community. Our group discounts and tailored solutions foster a sense of neighborhood camaraderie.
- Technical Excellence: Our installations are more than just transactions; they are transformations that optimize home comfort with cutting-edge technology.
- Dedication to Sustainability: Each installation is a step towards a greener future, with systems that reduce carbon footprints and enhance energy efficiency.
Final Thoughts
The dual installation in Anjou is more than just a project; it's a milestone that reflects our values and vision. By harmonizing individual needs with community benefits, we create environments that are not only comfortable but also connected.
AirGreen is more than just your HVAC provider—we are your partner in ensuring a comfortable, efficient, and sustainable home environment. Let us bring our expertise and passion for innovation to your next project. Because at AirGreen, we're not just installing systems; we're enriching communities.
The job tools
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
How the job unfolds
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
Model, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
Floors and furniture protected, wall plate position marked level, wall opening located.
A single opening, with the slope the drain needs to flow outside.
Set on a stand raised above the snow, with the clearances the manufacturer requires.
Connected, insulated and protected. The opening is then sealed against water, cold air and insects.
A dedicated circuit and an accessible disconnect near the outdoor unit.
Leak test, vacuum, then start-up and a check of heating and cooling.
Remote, modes, filters: we show you the essentials before we leave.
- The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
- The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
- Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
- The wall openingA single opening, with the slope the drain needs to flow outside.
- The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
- Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
- The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
- Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
- The walkthroughRemote, modes, filters: we show you the essentials before we leave.
What we check on a job like this one
Each number is a point we check on site. Switch between summer and winter to watch air and heat move.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
Is your home ready?
Check what applies at your place. A "no" is not a refusal: it is what we sort out during the estimate.
Good habits, once the unit is in place
Six simple habits that keep the unit going. Your list stays on this device.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
The right pages, at the right time
Four statements: true or false?
It all comes down to details you have just seen.
1. In heating mode, the outdoor unit can produce water.
During defrost cycles. That water must drain away without forming ice.
2. You pick the capacity with a simple square-footage rule.
Windows, insulation, orientation and how the room is used all count. Capacity is chosen on site.
3. A multi-zone connects several indoor heads to a single condenser.
One head per room, all on the same condenser. Each room keeps its own temperature.
4. The disconnect can sit behind the patio furniture.
It must stay accessible: it is what shuts the unit off for service.
0 / 4 right answers
What people ask us about this kind of work
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
How cold can it heat?
How much can I save?
How is the LogisVert assistance calculated?
Is it noisy?
The outdoor unit is covered in ice: is that normal?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
An on-site estimate, the right capacity, the right equipment.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).