Installation of a SHARP ZHU1 Ductless Heat Pump in Kirkland
Experience year-round comfort with AirGreen’s installation of the SHARP ZHU1 heat pump in Kirkland. Eco-friendly, efficient, and eligible for the highest Hydro-Québec grant—find out more!
Take a tour of the installation
Each number is a point we check on site. Switch between summer and winter to watch air and heat move.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
Combining Cutting-Edge HVAC Innovation with Montreal’s Climate Challenges
When it comes to reliable heating and cooling in Quebec's unpredictable climate, AirGreen consistently rises to the occasion. Our latest project in Kirkland involved the installation of a SHARP ZHU1 12,000 BTU ductless heat pump, a system that perfectly embodies efficiency, technology, and comfort. This is not just another installation; it’s a step towards greener, smarter, and more comfortable living.
Why the SHARP ZHU1 is the Perfect Fit for Kirkland Homes
The SHARP ZHU1 heat pump stands out as one of the most advanced solutions on the market today. Here’s why:
- Exceptional Energy Efficiency: With an outstanding 25.0 SEER rating, this mini split ensures optimal performance while keeping energy bills to a minimum.
- Extreme Cold Resistance: Designed for Quebec’s harsh winters, the SHARP ZHU1 continues to provide reliable heating even at temperatures as low as -27°C.
- Eco-Friendly Refrigerant: Utilizing the R-32 refrigerant, this unit reduces greenhouse gas emissions and boasts a lower global warming potential compared to traditional options.
- Silent Operation: With an interior sound level as low as 22 dB(A), the SHARP ZHU1 operates quietly, ensuring your comfort without disturbance.
The Installation Process: A Seamless Blend of Precision and Expertise
At AirGreen, we pride ourselves on delivering installations that are as smooth and efficient as the equipment we install. For this Kirkland home, we carefully planned every step to ensure optimal placement and functionality:
- Strategic Placement: The interior unit, measuring 41.42 x 9.80 x 12.44 inches, was installed in a central location to maximize airflow across the primary living spaces. The exterior compressor, compact yet powerful at 30.72 x 10.59 x 21.25 inches, was discreetly positioned to blend seamlessly with the property’s aesthetics.
- Optimized Connections: Using 1/4 - 3/8-inch piping, we ensured a secure and efficient connection between the indoor and outdoor units, optimizing refrigerant flow for peak performance.
- Wi-Fi Integration: The unit's built-in Wi-Fi was configured to enable the homeowner to monitor and adjust settings remotely, adding convenience and energy savings.
What Sets the SHARP ZHU1 Apart: Key Features and Benefits
Plasmacluster™ Air Purification Technology
This installation was not just about heating and cooling; it was about enhancing indoor air quality. The SHARP ZHU1 features Plasmacluster™ Technology, which:
- Neutralizes Airborne Viruses and Bacteria: Creates a healthier living environment.
- Eliminates Mold and Allergens: Perfect for households with allergy sufferers.
- Fights Odors: Keeps indoor spaces fresh and welcoming.
Coanda Airflow Control
To ensure uniform temperature distribution, the SHARP ZHU1 employs the Coanda Effect, which directs airflow along walls and ceilings. This technology minimizes drafts and maintains a consistent temperature throughout the home.
Quick Defrost Mode
Kirkland winters are unforgiving, but this heat pump’s Quick Defrost Mode ensures minimal downtime during frosty conditions, keeping the home warm and comfortable.
Maximizing Savings with Hydro-Québec’s LogisVert Grant
One of the standout aspects of this installation is the $2,268 LogisVert Grant offered by Hydro-Québec—the highest amount available for any 12,000 BTU system. This grant significantly reduces the upfront cost, making the SHARP ZHU1 not only an environmentally responsible choice but also a financially savvy investment.
Why Kirkland Homeowners Choose AirGreen
From Montreal to the South Shore and beyond, AirGreen is synonymous with quality and reliability. Here’s why our customers trust us:
- Expert Knowledge: Our technicians are extensively trained to handle advanced systems like the SHARP ZHU1.
- Customer-Centric Approach: We tailor every installation to meet the unique needs of each home.
- Commitment to Sustainability: By offering cutting-edge, eco-friendly products, we help our customers reduce their carbon footprint.
A Commitment to Comfort and Sustainability
This installation is more than just a technical accomplishment; it reflects our dedication to providing solutions that align with modern living standards. By choosing the SHARP ZHU1, the homeowner in Kirkland not only secured year-round comfort but also contributed to a more sustainable future.
Whether it’s the Plasmacluster™ Technology, the R-32 refrigerant, or the unmatched energy efficiency, this system exemplifies the perfect balance of innovation and practicality.
Ready to Upgrade Your Home’s Comfort?
At AirGreen, we don’t just install HVAC systems; we deliver peace of mind. If you’re ready to experience the benefits of a state-of-the-art heat pump, contact us today for a consultation. Let’s make your home as comfortable and efficient as it can be.
The big day, step by step
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
Model, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
Floors and furniture protected, wall plate position marked level, wall opening located.
A single opening, with the slope the drain needs to flow outside.
Set on a stand raised above the snow, with the clearances the manufacturer requires.
Connected, insulated and protected. The opening is then sealed against water, cold air and insects.
A dedicated circuit and an accessible disconnect near the outdoor unit.
Leak test, vacuum, then start-up and a check of heating and cooling.
Remote, modes, filters: we show you the essentials before we leave.
- The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
- The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
- Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
- The wall openingA single opening, with the slope the drain needs to flow outside.
- The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
- Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
- The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
- Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
- The walkthroughRemote, modes, filters: we show you the essentials before we leave.
What would it look like at your place?
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
Four mistakes we do not make
Flip each card to see what we do instead.
Your own project, step by step
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
Is your home ready?
Check what applies at your place. A "no" is not a refusal: it is what we sort out during the estimate.
Four statements: true or false?
It all comes down to details you have just seen.
1. In heating mode, the outdoor unit can produce water.
During defrost cycles. That water must drain away without forming ice.
2. You pick the capacity with a simple square-footage rule.
Windows, insulation, orientation and how the room is used all count. Capacity is chosen on site.
3. A multi-zone connects several indoor heads to a single condenser.
One head per room, all on the same condenser. Each room keeps its own temperature.
4. The disconnect can sit behind the patio furniture.
It must stay accessible: it is what shuts the unit off for service.
0 / 4 right answers
What people ask us about this kind of work
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
How cold can it heat?
How much can I save?
How is the LogisVert assistance calculated?
Is it noisy?
The outdoor unit is covered in ice: is that normal?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
Every house has its constraints. We see them before we install.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).