Installation of a Sharp ZU1 15,000 BTU Mini Split in LaSalle
See how AirGreen installed a Sharp ZU1 15,000 BTU mini split in LaSalle. Eco-friendly, energy-efficient, and perfect for Quebec’s cold winters. Find out how it can enhance your home!
- City
- Region
- Equipment
- Brand
- Challenges
- Published
The job on one screen
The unit’s data sheet
The range as published on airgreen.ca: pick a size to see its capacity in deep cold.
| Size | Heating at −8 °C | Heating at −15 °C | Coldest certified point | COP at −15 °C | SEER | HSPF | Indicative LogisVert aid |
|---|---|---|---|---|---|---|---|
| Sharp ZU1 12 000 | 14,500 | 12,000 | −27 °C: 7,200 | 2.11 | 22.0 | 11.0 | $1,740 |
| Sharp ZU1 15 000 | 18,100 | 15,300 | −27 °C: 10,100 | 2.1 | 24.0 | 11.0 | $2,172 |
| Sharp ZU1 18 000 | 22,000 | 18,000 | −27 °C: 11,500 | 2.2 | 24.0 | 11.0 | $2,640 |
| Sharp ZU1 24 000 | 22,400 | 19,000 | −27 °C: 12,300 | 2.2 | 22.0 | 11.0 | $2,688 |
According to NEEP, it delivers 14,500 BTU/h at −8 °C (17 °F), more than at 8 °C (14,000 BTU/h). It heats as hard in moderate cold as in mild weather.
According to NEEP, its certified maximum capacity at −27 °C (−17 °F) is 7,200 BTU/h, 60% of its nominal 12,000 BTU size.
At 8 °C, its certified maximum capacity reaches 17,100 BTU/h, 42% more than its nominal 12,000 BTU size.
According to NEEP, it delivers 18,100 BTU/h at −8 °C (17 °F), more than at 8 °C (18,000 BTU/h). It heats as hard in moderate cold as in mild weather.
According to NEEP, its certified maximum capacity at −27 °C (−17 °F) is 10,100 BTU/h, 67% of its nominal 15,000 BTU size.
At 8 °C, its certified maximum capacity reaches 21,800 BTU/h, 45% more than its nominal 15,000 BTU size.
According to NEEP, it delivers 22,000 BTU/h at −8 °C (17 °F), more than at 8 °C (21,600 BTU/h). It heats as hard in moderate cold as in mild weather.
According to NEEP, its COP at −27 °C is 1.88: the highest of the ZU1 line, which ranges from 1.79 to 1.82 at that temperature.
According to NEEP, its certified maximum capacity at −27 °C (−17 °F) is 11,500 BTU/h, 64% of its nominal 18,000 BTU size.
At −27 °C, its certified minimum capacity is 3,200 BTU/h (5,500 at 8 °C). It slows down instead of cycling on and off.
According to NEEP, its certified heating capacity at −15 °C (5 °F) is 19,000 BTU/h, 79% of its nominal 24,000 BTU size. Its COP there is 2.20.
Data read live from the airgreen.ca page of each size (NEEP / AHRI certified performance). When the title names the installed size, it is highlighted; otherwise the whole range is shown. The aid shown is today’s, using Hydro-Québec’s rule ($120 per 1,000 BTU/h at −8 °C); amounts quoted in the article date from its publication. Only Hydro-Québec confirms the assistance granted.
The article, chapter by chapter
Experience Comfort Even at -27°C with AirGreen's Latest Heat Pump Installation
At AirGreen, we take pride in our work and the satisfaction of our clients. Our most recent installation in LaSalle, a bustling neighborhood on the island of Montreal, is no exception. We had the privilege of installing a Sharp ZU1 15,000 BTU wall-mounted mini split heat pump, a top-tier unit that promises both efficiency and durability. This project showcases the capabilities of our team and the outstanding features of the Sharp ZU1 model, perfectly suited for the demanding climate of Quebec.
Why Choose the Sharp ZU1 15,000 BTU Mini Split?
The Sharp ZU1 series is renowned for its versatility and cutting-edge features. It’s built for those who need reliable performance, even in extreme conditions. With the ability to operate efficiently at temperatures as low as -27°C, this unit ensures that homeowners stay comfortable through Quebec’s notoriously harsh winters. But what truly sets the Sharp ZU1 apart is its eco-friendly R-32 refrigerant. This not only makes it more energy-efficient but also aligns with government regulations that will come into effect by 2025. The Sharp ZU1 is, therefore, future-proof, making it an excellent investment for long-term savings and sustainability.
The Installation: AirGreen at Its Best
Our team arrived at the LaSalle residence early in the day, ready to install the 15,000 BTU Sharp ZU1 unit. This mini split heat pump was chosen for its impressive combination of cooling and heating capacity, perfect for a home that needs efficient temperature regulation year-round. The outdoor compressor, with serial number AE-X15ZU1, and the indoor unit, serial number AY-XP15ZU1, were mounted with precision to ensure optimal performance and longevity.
Both the indoor and outdoor units were securely mounted to the brick exterior of the home. The exterior unit’s dimensions of 30.72 x 10.59 x 21.25 inches fit perfectly against the building's façade, while the sleek indoor unit (measuring 41.42 x 9.80 x 12.44 inches) was installed in the main living area to ensure even air distribution throughout the space. With our expertise, we completed the installation efficiently and effectively, leaving the homeowner with a system that’s Energy Star certified and equipped to handle the demands of the Montreal climate.
Features That Stand Out
1. Plasmacluster Technology: Superior Air Quality
One of the key features of the Sharp ZU1 is its Plasmacluster technology. This unique system actively purifies the air by releasing ions that neutralize airborne bacteria, viruses, and mold. It also helps to eliminate unpleasant odors, ensuring that the air inside the home is always fresh and clean. For families or individuals concerned about air quality, especially during flu season or allergy spikes, this feature offers significant peace of mind.
2. Coanda Airflow Control: Ultimate Comfort Without Direct Drafts
The Coanda airflow system is another standout feature of the Sharp ZU1. By mimicking the natural movement of air along surfaces, it ensures that the room maintains a consistent temperature without the discomfort of cold or warm air being blown directly on the occupants. The long diffuser flap can direct airflow up to 15 meters, making it ideal for larger rooms or open-concept spaces.
3. Quiet Operation: A Peaceful Environment
Noise levels are always a concern when installing mini split systems, but the Sharp ZU1 excels in this area. The interior unit operates at a mere 23-46 dB(A), quieter than a typical conversation, ensuring that the system won’t interfere with daily activities or restful sleep. The exterior unit also operates quietly, with a sound pressure level of 49.0 dB(A), which is barely noticeable in most urban environments.
Eco-Friendly and Cost-Effective
With the Sharp ZU1, homeowners can enjoy both comfort and cost savings. Thanks to the R-32 refrigerant, the system uses 10% less energy than older models, which translates into lower monthly utility bills. Plus, the 24.0 SEER rating makes it one of the most energy-efficient models on the market. And let’s not forget the generous grants available: this unit qualifies for up to $2,172 from Hydro-Québec's LogisVert Grant, making it an even smarter investment for homeowners looking to upgrade their HVAC systems.
Built to Handle Quebec’s Harsh Winters
One of the primary reasons the Sharp ZU1 is such a popular choice for our clients in Montreal, Laval, Longueuil, the North Shore, and the South Shore is its heating capacity. Unlike many systems that struggle in colder climates, the Sharp ZU1 continues to provide efficient heating even when outdoor temperatures drop to -27°C. This is thanks to Sharp's patented Hot Gas Pipe System, which prevents the outdoor compressor from freezing and ensures continuous operation during even the coldest months.
Additional Features to Love
-
Inverter Technology: The Sharp ZU1 uses inverter technology to maintain consistent room temperatures without frequent cycling on and off, which reduces wear and tear on the system and further improves energy efficiency.
-
Self-Cleaning Mode: With Plasmacluster ions working to prevent the buildup of mold inside the unit, the Sharp ZU1 also features a self-cleaning mode to further extend its lifespan and maintain optimal performance.
-
WiFi Connectivity: Homeowners can monitor and control the system remotely via a smartphone app, which provides real-time updates on room temperature, energy usage, and even the presence of people in the home. This ensures that the system is always running at peak efficiency.
The AirGreen Advantage
At AirGreen, we take pride in providing top-notch service to all of our clients across Greater Montreal. From initial consultation to post-installation support, we ensure that every detail is handled with care. For this Sharp ZU1 installation in LaSalle, we meticulously planned every aspect of the setup, from positioning the outdoor unit to choosing the optimal location for the indoor head.
Whether you're looking to upgrade your existing system or install a new heat pump for the first time, AirGreen is here to help. Our team of certified HVAC professionals is committed to delivering the best solutions for your home, tailored to meet your specific needs and budget. And with competitive pricing and access to provincial and federal grants, there’s never been a better time to invest in a Sharp ZU1 mini split heat pump.
Conclusion: A Future-Proof Investment for Any Home
The installation of the 15,000 BTU Sharp ZU1 mini split in LaSalle is just one example of how AirGreen is bringing cutting-edge HVAC solutions to homeowners across Montreal and beyond. With its combination of advanced air purification, Coanda airflow control, quiet operation, and eco-friendly performance, the Sharp ZU1 is the perfect solution for homeowners who want comfort, savings, and sustainability.
If you’re considering upgrading your home’s HVAC system, there’s no better choice than the Sharp ZU1. Contact AirGreen today to learn more about this fantastic unit and how it can benefit your home.
The job tools
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Baseboards and electric furnaces turn 1 kWh of electricity into 1 kWh of heat. A heat pump delivers more: that is its COP. At Hydro-Québec’s rate D (11.142¢/kWh above 40 kWh a day, since 1 April 2026):
Hydro-Québec: a heat pump can be up to three times more efficient than baseboards for heating in the colder months.
Estimate per kWh of heat, at the chosen temperature, using the certified COP from the product page. Taxes, access charge and backup heat not included.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
How the job unfolds
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
Model, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
Floors and furniture protected, wall plate position marked level, wall opening located.
A single opening, with the slope the drain needs to flow outside.
Set on a stand raised above the snow, with the clearances the manufacturer requires.
Connected, insulated and protected. The opening is then sealed against water, cold air and insects.
A dedicated circuit and an accessible disconnect near the outdoor unit.
Leak test, vacuum, then start-up and a check of heating and cooling.
Remote, modes, filters: we show you the essentials before we leave.
- The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
- The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
- Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
- The wall openingA single opening, with the slope the drain needs to flow outside.
- The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
- Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
- The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
- Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
- The walkthroughRemote, modes, filters: we show you the essentials before we leave.
What we check on a job like this one
Each number is a point we check on site. Switch between summer and winter to watch air and heat move.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
Is your home ready?
Check what applies at your place. A "no" is not a refusal: it is what we sort out during the estimate.
Good habits, once the unit is in place
Six simple habits that keep the unit going. Your list stays on this device.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
The right pages, at the right time
Four statements: true or false?
It all comes down to details you have just seen.
1. In heating mode, the outdoor unit can produce water.
During defrost cycles. That water must drain away without forming ice.
2. You pick the capacity with a simple square-footage rule.
Windows, insulation, orientation and how the room is used all count. Capacity is chosen on site.
3. A multi-zone connects several indoor heads to a single condenser.
One head per room, all on the same condenser. Each room keeps its own temperature.
4. The disconnect can sit behind the patio furniture.
It must stay accessible: it is what shuts the unit off for service.
0 / 4 right answers
What people ask us about this kind of work
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
How cold can it heat?
How much can I save?
How is the LogisVert assistance calculated?
Is it noisy?
The outdoor unit is covered in ice: is that normal?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
An on-site estimate, the right capacity, the right equipment.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).