A wall-mounted heat pump installation combining performance, discretion, and energy efficiency in Lachine
Installation of a SHARP ZU1 18000 BTU wall-mounted heat pump in Lachine. An efficient, discreet, and eco-friendly solution, perfect for Quebec winters. Plasmacluster technology, R32, heating down to -27°C.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
In a quiet residential neighborhood in Lachine, our team of HVAC installation experts recently completed a tailored project: the installation of a SHARP ZU1 18000 BTU wall-mounted heat pump. This high-performance system, known for its reliability and advanced technology, was carefully chosen to meet the heating and cooling needs of a single-family home while respecting the aesthetic and structural constraints of the property.
Why this Lachine residence needed a high-performance solution
Located in an area with frequent temperature fluctuations, the home had a clear need for a system capable of efficient heating even at -27°C, while also providing optimal cooling in summer. The client, concerned about energy consumption and indoor air quality, was looking for a reliable, quiet, and long-lasting solution.
After a complete assessment of the space and expectations, the SHARP ZU1 18000 BTU wall-mounted heat pump stood out as the ideal choice.
A technical overview of the SHARP ZU1 18000 BTU heat pump
SHARP’s ZU1 series represents the pinnacle of cutting-edge Japanese HVAC technology for residential applications. Here are the key features of this unit:
-
Heating capacity: Up to 21,800 BTU/h, maintaining consistent performance down to -27°C thanks to SHARP’s exclusive HOT GAS PIPE system.
-
Cooling capacity: 18,000 BTU/h, ideal for a large open area or multiple connected zones.
-
Refrigerant: R32, an environmentally friendly refrigerant with a Global Warming Potential (GWP) one-third lower than R410A.
-
Plasmacluster Technology: unique to SHARP, it purifies the air by neutralizing viruses, bacteria, allergens, and odors without any chemicals.
-
SEER: 24 / HSPF: 10 – An energy efficiency rating that exceeds industry standards.
Technical challenges on site: spatial constraints and aesthetic finish
The installation took place in a room corner with decorative ceiling moldings. We had to precisely adapt the positioning of the indoor unit to ensure optimal air circulation while preserving the visual harmony of the space. Thanks to our expertise in wall-mounted heat pump installations in Lachine, we successfully:
-
Securely mounted the unit at a height allowing even air distribution throughout the room.
-
Used a discreet wall pass-through for refrigerant lines, minimizing visible outdoor piping.
-
Ensured effective and invisible drainage, even in winter, with a perfectly sloped connection to the existing storm drain system.
The AirGreen touch: beyond installation
At AirGreen, we do more than just install a heat pump. We accompany each client through a complete process, from evaluation to system launch and personalized recommendations:
-
Thermal analysis of the home
-
Model selection based on needs and available grants
-
Professional installation compliant with electrical and HVAC standards
-
System walkthrough (remote control usage, maintenance tips)
-
Post-installation follow-up and automatic reminders for annual preventative maintenance
A heat pump built for Lachine winters
The ZU1 18000 BTU model is fully equipped to withstand the cold winter days of Lachine, especially thanks to:
-
Its high-performance compressor built to operate down to -27°C without losing power.
-
Its RAPID DEFROST automatic system, maintaining unit efficiency in harsh cold.
-
Multiple built-in drainage holes on the outdoor unit to prevent ice buildup.
A discreet and quiet system
With an indoor unit emitting as little as 28 dB on low mode, acoustic comfort is unmatched. This heat pump is barely noticeable, all while providing constant comfort year-round. Its clean design, seamlessly integrated into the room, perfectly illustrates our attention to detail during installations.
An installation eligible for attractive rebates
Thanks to its exceptional energy efficiency, this system qualifies for the LogisVert rebate program from Hydro-Québec, allowing the homeowner to benefit from a rebate of up to $1,704, depending on the program’s conditions.
We assisted the client with all administrative steps, including:
-
Providing the AHRI certified number
-
Supplying SHARP’s official technical documentation
-
Delivering proof of energy compliance as required
What the client had to say
The homeowner shared with us:
“I wanted a reliable, stylish, and especially winter-ready solution. The AirGreen team took care of everything—from product selection to the finishing touches. The result: immediate comfort and lower electricity bills already. Thank you!”
Maintenance tips to maximize your SHARP heat pump’s lifespan
Regular HVAC maintenance is essential to ensure optimal performance and prolong the lifespan of your heat pump:
-
Clean the filters monthly
-
Have the outdoor unit inspected before winter
-
Schedule an annual maintenance visit with our certified team
Why choose AirGreen for your heat pump installation in Lachine?
✔ Certified HVAC specialists for SHARP products
✔ Proven experience across all building types
✔ Dedicated team focused on client satisfaction and timelines
✔ Transparent pricing and rebate guidance
✔ Quick response times in Lachine and throughout Greater Montreal
AirGreen: HVAC solutions designed for Lachine and its unique climate
At AirGreen, every wall-mounted heat pump installation is a tailor-made project. Whether you’re in Lachine, Verdun, or anywhere in western Montréal, we offer expertise that combines technology, energy efficiency, and long-term comfort.
How it goes, from the first call to the end
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
Model, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
Floors and furniture protected, wall plate position marked level, wall opening located.
A single opening, with the slope the drain needs to flow outside.
Set on a stand raised above the snow, with the clearances the manufacturer requires.
Connected, insulated and protected. The opening is then sealed against water, cold air and insects.
A dedicated circuit and an accessible disconnect near the outdoor unit.
Leak test, vacuum, then start-up and a check of heating and cooling.
Remote, modes, filters: we show you the essentials before we leave.
- The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
- The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
- Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
- The wall openingA single opening, with the slope the drain needs to flow outside.
- The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
- Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
- The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
- Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
- The walkthroughRemote, modes, filters: we show you the essentials before we leave.
And at your place?
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
Which type of equipment for your project?
Pick what looks like your need.
Four mistakes we do not make
Flip each card to see what we do instead.
What people ask us about this kind of work
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
How cold can it heat?
How much can I save?
How is the LogisVert assistance calculated?
Is it noisy?
The outdoor unit is covered in ice: is that normal?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
Useful pages for what comes next
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
Tell us about your house. We come and see it for free.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).