Home / Comparisons / 18,000 BTU wall-mounted heat pumps
LG ARTCOOL MIRROR R32 and LG ARTCOOL PRESTIGE R32: the finish and the certificate, side by side
Two 18,000 BTU LG wall-mounted heat pumps on R-32, the capacity the two series have in common on our site. This page separates two readings: what you see on the wall, then what each AHRI certificate states, with its source and its conditions.


LGARTCOOL MIRROR R32 · 18,000 BTU
KNUAK181A / KUSAB181A · AHRI 215413010
Same AHRI and NEEP certified values as the 18,000 BTU DUALCOOL R32 (AHRI 215413009), which uses the same KUSAB181A outdoor unit.
View the product page
LGARTCOOL PRESTIGE R32 · 18,000 BTU
KNSAL181A / KUSAL181A · AHRI 215828275
No other NEEP record carries the KUSAL181A outdoor unit (search of Nov. 9, 2026).
View the product pageWhat the electricity costs, in dollars, winter and summer
AirGreen estimate for the same 18,000 BTU/h zone in Montréal, on Hydro-Québec Rate D, taxes included. Both heat pumps are calculated exactly the same way, with the same method as on all our comparison pages; only their certified efficiencies change. Electric baseboards serve as the reference point.
How this amount is calculated
- Heat needed over the winter. A zone whose heat loss reaches 18,000 BTU/h (5.28 kW) at −23.1 °C, Montréal’s design temperature: 5.28 kW × 24 h × 4,167 degree-days ÷ (18 − (−23.1)) = 12,837 kWh of heat for round-the-clock heating, all winter. Heating degree-days (base 18 °C) and design temperature: Natural Resources Canada, HOT2000 climate data, Montréal Intl station. With fewer hours a day (“Heating” slider), the heat is reduced in the same proportion, for the heat pump as for the baseboards: a simplification that does not account for recovery after a temperature setback.
- Electricity for heating. Heat pump: heat × 3.412 ÷ Region V HSPF2, the AHRI certificate value published by NEEP. Region V is the coldest in the standard, and its calculation includes the electric backup expected when the heat pump is no longer enough. Electric baseboards: 1 kWh of electricity for 1 kWh of heat.
- Electricity for cooling. 18,000 BTU/h ÷ SEER2 × hours a day × 60 days ÷ 1,000: the method of Hydro-Québec’s air-conditioning calculator, with the seasonal SEER2 efficiency from the AHRI certificate. The number of hours is a scenario, adjustable above from 1 to 24 h. At 24 h, the calculation assumes rated capacity all day long: that is a maximum, since a variable-speed unit slows down once the room is at the right temperature.
- Price. Hydro-Québec Rate D in effect April 1, 2026: 7.065¢ per kWh up to 40 kWh a day, 11.142¢ beyond; the average price, 9.104¢, is the one Hydro-Québec’s calculators use. GST and QST included. Network access charges, the same with or without a heat pump, are not counted.
AirGreen method v1.1, November 9, 2026. An estimate is for comparing units under the same conditions. The actual bill depends on the house, insulation, settings and use; this amount is not a promise.
Two readings of the same pair
On the left, what you see: the two indoor units, at the same scale. On the right, what you do not see: the values of each AHRI certificate, published by NEEP. The selector brings one unit forward; the other stays in the background.
The finish, on the wall


Photos of the two indoor units at the same scale (44 in wide area). Dimensions and weight per the LG brochures.
The certificate, per NEEP
NEEP, records 389310 and 385473, consulted November 9, 2026. Each pair of bars shares the same scale; the capacities are the certified maximums at the temperature shown.
What the ARTCOOL PRESTIGE R32 certificate adds. A test point at −25 °C, with 14,780 BTU/h maximum and a COP of 1.44. At −15 °C, 21,600 BTU/h maximum against 15,200. A SEER2 of 24.0 against 23.0 and an HSPF2 Region IV of 11.0 against 10.0. At 8.3 °C, it is the reverse: the certified maximum capacity of the ARTCOOL MIRROR R32 is the higher one, 30,020 against 27,400 BTU/h.
Below −15 °C: every published value, down to −30 °C
Below −15 °C, NEEP certifies one point for each unit: −20 °C for the ARTCOOL MIRROR R32, −25 °C for the ARTCOOL PRESTIGE R32. The LG brochure for the ARTCOOL PRESTIGE adds the maximum capacity at −18 °C. Between two published values, we show the range; nothing is calculated.
At −15 °C, both units have a value certified by NEEP; the ARTCOOL MIRROR brochure prints 15,120 BTU/h, 80 BTU/h less than the certificate, which prevails. At −20 °C, the ARTCOOL MIRROR R32 has a certified point and the ARTCOOL PRESTIGE R32 a range between two published values. At −25 °C, only the ARTCOOL PRESTIGE R32 has a certified point. At −30 °C, the chart shows each unit’s last published value, at its own temperature.
What LG states as a percentage of rated capacity
The LG brochures express maximum heating capacity relative to each model’s rated capacity. Here, the base is the same for both: 21,600 BTU/h. The line marks 100%.
What LG writes for each model, feature by feature
The features come from two kinds of LG documents: the Canadian brochure for each series and the LG Electronics U.S.A. submittal sheet for the same model number. When neither mentions a feature, we say so: that does not mean the feature does not exist.
Both photos are in the Finish and certificate section.
The capacity at each temperature is in the Extreme cold section.
The Canadian brochures do not mention Wi-Fi; the submittal sheets do.
Maximum published airflow in cooling: 706 CFM and 813 CFM.
Both sheets name a self-cleaning indoor coil.
Wording repeated as LG writes it.
Same control features in both sheets.
Both NEEP records list a 90 W element, on at 0 °C and below in heating mode.
Useful for a room that needs cooling even in winter.
| Documented feature | ARTCOOL MIRROR R32 | ARTCOOL PRESTIGE R32 |
|---|---|---|
| Mirror-finish front panel | Yes “mirror-finish units” (French brochure), brochure 04_25 | Not published by the manufacturer brochure 03_25 and submittal sheet |
| Wi-Fi app | Yes ThinQ, LG U.S.A. submittal sheet | Yes ThinQ, LG U.S.A. submittal sheet |
| Filter and automatic cleaning | Yes Self-cleaning indoor coil; 3M Micro Filter | Yes Self-cleaning indoor coil |
| Refrigerant leak detection | Yes brochure 04_25 and submittal sheet | Not published by the manufacturer brochure 03_25 and submittal sheet |
| Timer and automatic restart | Yes 24 h timer, automatic restart | Yes 24-Hour on/off timer, Auto Restart |
| Base pan heater | Yes brochure 04_25; NEEP record: 90 W, on at 0 °C and below, in heating mode | Yes brochure 03_25; NEEP record: 90 W, on at 0 °C and below, in heating mode |
| Published fan speeds | 4 706 / 530 / 477 / 371 CFM in cooling | 4 813 / 601 / 495 / 389 CFM in cooling |
| Cooling in cold weather | Yes down to −10 °C; −18 °C with the optional kit | Yes down to −10 °C; −18 °C with the optional kit |
| Compressor | Twin rotary brochure 04_25 | Twin rotary brochure 03_25 |
Indoor unit sound, fan speed by fan speed
Published indoor sound pressure
Each point is a fan speed published by LG, in heating mode.
How to read these figures. The lower the decibels, the quieter the unit. Each point is one published fan speed. A rise of 10 dB(A) is heard as roughly twice as loud.
Same manufacturer, same test standard. The LG submittal sheets state, for both models, sound pressures measured in an anechoic chamber to the ISO 3745 standard; the measuring distance is not specified there. The gap ranges from 2 to 3 dB(A) depending on the speed.
Values declared by LG for both models, to the same test standard (ISO 3745); the measuring distance is not published.
On the wall: 2 7/16 in difference in width, 2 3/32 in in depth
The ARTCOOL PRESTIGE R32 is the wider and deeper of the two, and its indoor unit weighs 9.9 lb more. It also accepts longer piping: 164 ft against 114.8 ft.
The two indoor units, widths to the same scale




Width of the unit only, per LG. The clearances around the indoor unit and the outdoor unit are given in each model’s installation manual.
The piping length between the two units
Lengths and added refrigerant per the LG brochures: minimum 9.8 ft for both; maximum 114.8 ft for the ARTCOOL MIRROR R32 and 164 ft for the ARTCOOL PRESTIGE R32. Diagram: the exact amount is calculated by the installer.
| Installation, per the LG brochures | ARTCOOL MIRROR R32 | ARTCOOL PRESTIGE R32 |
|---|---|---|
| Indoor unit, weight | 39 9/32 × 13 19/32 × 8 11/32 in, 27.8 lb | 41 23/32 × 14 3/16 × 10 7/16 in, 37.7 lb |
| Outdoor unit W × H × D, weight | 37 13/32 × 32 3/4 × 13 in, 127.9 lb | 37 13/32 × 32 3/16 × 10 7/16 in, 135.4 lb dimensions as printed in the brochure; the depth there is the same as that of the indoor unit, to be confirmed with the quote |
| Maximum piping length | 114.8 ft minimum 9.8 ft | 164 ft minimum 9.8 ft |
| Precharged length | 24.6 ft 0.32 oz per ft beyond | 24.6 ft 0.32 oz per ft beyond |
| Factory R-32 precharge | 51.1 oz | 65.3 oz |
| Maximum height difference | 49.2 ft | 98.4 ft |
| Liquid – gas line diameters | 3/8 – 5/8 in | 3/8 – 5/8 in |
| Electrical protection | MCA 19 A · MOCP 30 A | MCA 19 A · MOCP 30 A |
| Outdoor unit sound, maximum | 55 dB(A) in cooling · 55 dB(A) in heating | 55 dB(A) in cooling · 56 dB(A) in heating |
| Dehumidification | 2.6 L/h 5.5 US pints/h per LG | 2.0 L/h 4.23 US pints/h per LG |
| Stated heating / cooling range | −20 to 18 °C / −10 to 48 °C heating at wet-bulb temperature | −25 to 18 °C / −10 to 48 °C heating at wet-bulb temperature |
Questions about this pair
Why is this comparison made at 18,000 BTU?
Because it is the capacity the two series have in common on our site: the ARTCOOL MIRROR R32 is offered there in 9,000, 12,000 and 18,000 BTU, the ARTCOOL PRESTIGE R32 in 15,000, 18,000 and 24,000 BTU. Comparing two different capacities would distort every row.
What does the ARTCOOL PRESTIGE R32 certificate add?
Per NEEP: a test point at −25 °C (14,780 BTU/h maximum, COP 1.44), 21,600 BTU/h maximum at −15 °C against 15,200, a SEER2 of 24.0 against 23.0 and an HSPF2 Region IV of 11.0 against 10.0. At 8.3 °C, the certified maximum capacity of the ARTCOOL MIRROR R32 is the higher one: 30,020 against 27,400 BTU/h.
Does the ARTCOOL MIRROR R32 have its own certificate?
Yes: AHRI 215413010 for the 18,000 BTU. NEEP publishes the same certified values for the 18,000 BTU DUALCOOL R32 (AHRI 215413009), which uses the same KUSAB181A outdoor unit. The indoor unit is different: the ARTCOOL MIRROR one has a mirror-finish front panel, per LG.
Do both have Wi-Fi?
The LG Electronics U.S.A. submittal sheets for these two model numbers state “Built-in Wi-Fi via ThinQ app”. The Canadian brochures for the two series do not mention it.
What does LG publish for the sound of the two indoor units?
In heating, 37, 42 and 47 dB(A) for the ARTCOOL MIRROR R32 and 40, 44 and 49 dB(A) for the ARTCOOL PRESTIGE R32, from low speed to high speed. The LG submittal sheets state the same test standard for both, ISO 3745, without specifying the distance.
Which one costs less to run?
With our method, the gap comes from the certified efficiencies: HSPF2 Region V of 8.0 and 8.2, SEER2 of 23.0 and 24.0. The “Cost by season” module shows the exact gap, in dollars, for your hours of use and the price per kWh.
What about the warranty?
LG publishes its terms for each model. The warranty documents come with the quote.
The AHRI certificate values, published by NEEP
| Certified value | ARTCOOL MIRROR R32 | ARTCOOL PRESTIGE R32 |
|---|---|---|
| Seasonal efficiencies | ||
| SEER2 | 23.0 | 24.0 |
| EER2 | 13.0 | 14.4 |
| HSPF2 Region IV | 10.0 | 11.0 |
| HSPF2 Region V | 8.0 | 8.2 |
| Rated capacity at 35 °C (cooling) | 18,000 BTU/h | 18,000 BTU/h |
| Heating, min. / rated / max. capacity | ||
| Min. / rated / max. capacity at 8.3 °C | 3,070 / 21,600 / 30,020 | 3,070 / 21,600 / 27,400 |
| Min. / rated / max. capacity at −8.3 °C | 2,730 / 13,300 / 18,600 | 2,934 / 13,100 / 24,300 |
| Min. / rated / max. capacity at −15 °C | 2,525 / 15,200 / 15,200 | 2,730 / 21,600 / 21,600 |
| Min. / rated / max. COP at 8.3 °C | 1.36 / 3.64 / 3.32 | 1.36 / 4.11 / 2.84 |
| Min. / rated / max. COP at −8.3 °C | 1.43 / 2.80 / 1.89 | 1.34 / 2.91 / 2.08 |
| Min. / rated / max. COP at −15 °C | 1.37 / 1.80 / 1.80 | 1.33 / 1.90 / 1.90 |
| Coldest point (different temperatures) | ||
| Test temperature | −20 °C (−4 °F) | −25 °C (−13 °F) |
| Max. capacity at the coldest point | 12,160 BTU/h | 14,780 BTU/h |
| Max. COP at the coldest point | 1.64 | 1.44 |
| Certification | ||
| Refrigerant | R-32 GWP 675 (IPCC AR4), class A2L (ASHRAE 34) | R-32 GWP 675 (IPCC AR4), class A2L (ASHRAE 34) |
| ENERGY STAR · cold climate | Yes NEEP, Nov. 9, 2026 | Yes NEEP, Nov. 9, 2026 |
| AHRI certificate · NEEP record | 215413010 · 389310 | 215828275 · 385473 |
“higher” marks the higher value of the same measurement, under the same conditions. It is not a recommendation. The “min. / rated / max.” capacities are those NEEP publishes for each test temperature.
Both are on the AirGreen website.
For an estimate visit or a quote on either of these units.
Documents consulted
Data verified on November 9, 2026. Certified values: AHRI certificates published by NEEP. Declared values (sound, dimensions, piping, features): the manufacturer’s documents cited above. When two sources differ, the AHRI certificate prevails.
LG, ARTCOOL, DUALCOOL, LGRED and ThinQ are trademarks of their respective owners. Logos are used only to identify the products. AirGreen is a dealer for this brand; this page is not produced, sponsored or endorsed by the manufacturer.
Photos: AirGreen and manufacturers, for identification.
Does a figure look wrong? Write to us at sales@airgreen.ca.
