KINGHOME Multi-Zone R32 Floor Console | 9,000 BTU

In stock
SKU: KM09XEDI
9,000BTU/h · cooling capacity
−30 °Cheats down to
Built-in Wi-FiMulti-zone indoor headRefrigerant R-3212-year warranty
Talk to a technician · 514 316-2973
Outdoor unitcompatible multi-zone
Model number (indoor)KM09XEDI

A low console for the room where a wall unit won't fit

Some rooms have no free wall space up high. The attic bedroom under a cottage roof, with its knee walls and sloped ceiling. The home office whose only exterior wall is taken up by a window. The small child's bedroom where an electric baseboard has run under the windowsill for forty years. For these spaces, we offer the KINGHOME 9,000 BTU floor console: a compact cabinet mounted low on the wall, exactly where the baseboard used to be, that heats and cools without needing space above the window or below the ceiling.

This console is an indoor head for a multi-zone heat pump. It doesn't work on its own: it must be connected to a KINGHOME Ultra Heat outdoor unit, which supplies it with R-32 refrigerant and power. That's why it has no AHRI number and no efficiency rating of its own: the certified efficiency belongs to the complete system, outdoor unit and heads together.

Why the console format suits small, cold rooms

A wall unit blows from the top of the room. In heating mode, warm air tends to stay near the ceiling, which is even more noticeable in an attic bedroom where the space narrows toward the top. The console does the opposite: it draws air in at the base of the wall and pushes it along the floor, where you feel the cold. Under a window, it also counters the layer of cold air coming down off the glass, exactly as the baseboard it replaces used to do.

In cooling mode, the console blows air upward through its top grille. The cool air then spreads through the room without a draft aimed at the bed or the armchair. In a bedroom, this is often more comfortable than air blowing from a wall unit.

The 9,000 BTU console specs

  • Nominal capacity: 9,000 BTU, R-32 refrigerant
  • Maximum airflow: 383 CFM
  • Indoor sound level: 29 to 42 dB(A), from the lowest speed to the highest
  • Dehumidification: 1.69 pt/h, or about 0.8 L/h
  • Dimensions: 27.56 x 8.46 x 23.62 inches (width x depth x height)
  • 220 V power supplied by the outdoor unit
  • Wi-Fi: included

At 8.46 inches deep, the console sticks out barely more than a radiator. Its 27.56-inch width fits under most bedroom windows, and its 23.62-inch height stays below the sill in most of the houses we visit. The front panel opens for access to the filter: cleaning takes a few minutes, no stepladder needed.

The right size for a bedroom

The 9,000 BTU is the smallest console size. It's meant for a closed room: bedroom, office, playroom or guest room. In a room this size, going bigger rarely gives better results. An oversized unit reaches the set point too quickly, slows down and removes less humidity in summer. The room ends up cool but clammy. The 9,000 BTU, on the other hand, runs long enough to dry the air, and its 29 dB(A) at low speed keeps it discreet at night.

We assess the room's heating needs on site based on its insulation, orientation, windows and whether there's a sloped roof above it. An attic bedroom under a poorly insulated roof can need more than a ground-floor bedroom of the same size. In that case, we tell you so frankly rather than install a unit that would run at its limit all winter.

Which Ultra Heat outdoor units this console works with

According to the compatibility table in the KINGHOME multi-zone brochure, 9,000 BTU heads connect to the entire Ultra Heat range:

  • KM18X6O (up to 2 zones) and KM24X6O (up to 3 zones): for a condo or a floor with two or three rooms
  • KM30X6O and KM36X6O (up to 4 zones): for a single-family home
  • KM42X6O and KM48X6O (up to 5 zones): for a large home
  • KM60X6O (up to 6 zones)

The console can be combined with wall-mounted heads, a cassette, a floor-ceiling unit or a ducted unit on the same outdoor unit, with each room keeping its own set point. A common setup: a cottage on the North Shore with two wall-mounted heads on the ground floor and a console in the upstairs attic bedroom, all on a single outdoor unit. The KM18X6O to KM48X6O units carry the ENERGY STAR cold climate designation and heat down to -30 °C according to their data sheets. The KM60X6O does not carry this designation.

Comfort features

According to the manufacturer's data sheet, the console includes Wi-Fi for app control; the I-feel function, which sets the temperature based on the remote control's sensor rather than the unit's; coil self-cleaning; forced defrost; soft start; and low-voltage start-up. A maintenance heating mode keeps an unoccupied room from freezing, handy for a guest room that stays closed part of the winter. The infrared remote is included; a wired wall controller is available as an option.

What we check before installation

A data sheet won't tell you whether a console suits a specific room. Here is what we look at during an assessment in Montréal, Laval, Longueuil, the North Shore or the South Shore.

Power supply

The console has no dedicated circuit: it gets its 220 V power from the outdoor unit through the interconnect cable. So it's the minimum circuit ampacity (MCA) and maximum overcurrent protection (MOP) of the chosen outdoor unit that determine the circuit at the panel. We read these values on the selected unit's data sheet and check the space available in the panel before confirming the quote. When the console replaces baseboards, we also check whether the freed-up heating circuits can be reused.

Outdoor unit location

We prefer a wall bracket that keeps the outdoor unit above the snow buildup and lets defrost water drain without forming ice under the unit. A unit set too low gets buried after a few storms, defrosts more often and loses efficiency. With an attic bedroom, the distance between the outdoor unit and the console can be significant: we factor it in from the start.

Piping and routing

The console's connection sizes are those listed in the manufacturer's data sheet, and the combined line length for all heads must stay within the outdoor unit's limits. Under a sloped roof, the piping often runs through the knee wall or the attic space; we plan the route so it stays insulated, accessible and protected from freezing.

The condensate drain

The console produces condensate in cooling mode, and the drain exits at the bottom of the unit. We give it a continuous slope toward the outside or toward a floor drain. When a slope isn't possible, we add a condensate pump. A poorly sloped drain is the leading cause of water damage we see on rushed installations.

Clearance in front of the console

A console hidden behind a bed, a desk or a heavy curtain loses a good part of its efficiency. We go over the room layout with you so the air intake at the bottom and the outlet at the top stay clear.

LogisVert grant

This console doesn't appear on its own on Hydro-Québec's list, since it has no certification of its own. The LogisVert grant is tied to the complete system, meaning the Ultra Heat outdoor unit and the combination of heads installed; eligibility is confirmed on the installation date. The indicative amount shown on each outdoor unit's page is calculated according to the LogisVert rule ($120 per 1,000 BTU/h of certified heating at -8.3 °C, or $50 with the KM60X6O, which has no cold climate designation), based on the certification established with wall-mounted heads; we confirm that the combination chosen with the console matches an entry on the list before giving you the quote. Only Hydro-Québec confirms the assistance granted.

Why choose AirGreen

  • Salaried refrigeration technicians trained on multi-zone systems, no improvised subcontracting.
  • Civil liability insurance of $5,000,000.
  • Vacuum, start-up and Kinghome warranty registration done by the book.
  • After-sales service you can actually reach, that knows your installation.

Request your free estimate: we assess the room, choose the Ultra Heat outdoor unit that suits the whole house and give you a clear quote.

Documentation

Warranty: 12 years on the compressor, 12 years on parts and 6 years on labour, directly from the distributor.