Venmar AVS® N Series ERV A160E75RT Air Exchanger | Montreal, Laval, Longueuil, South Shore and North Shore
Is it the right size for your home?
It delivers 133 cfm net, enough to ventilate 1,600 to 2,500 sq ft. Choose your home's living area.
It's the right size.
For a 1,500 to 2,500 sq ft home, about 105 cfm of air needs to be renewed continuously. This unit delivers 133 cfm net — enough for the house, with extra capacity to boost ventilation for the bathroom and kitchen.
Calculation: 0.35 air changes per hour over the living volume, with 9 ft ceilings. Our estimator sets the exact airflow room by room, following CSA F326.
What it does, in numbers
$17.57
Electricity per year
Less than a 60 W light bulb
Bulbs left on day and night. Same calculation for every line: wattage × 8,760 h × 11.142 ¢/kWh.
Meets the Québec Construction Code everywhere in the province. The Code requires 54% at −25 °C below 6,000 degree-days (Montréal, Laval, Longueuil and both shores) and 60% above that. This unit is rated at 63% at 66 cfm.
Airflow and efficiency: manufacturer's data; airflow at 0.4 in and power draw from the V160E75RT spec sheet. Cost: 18 W over 8,760 h at Hydro-Québec's Rate D second tier (11.142 ¢/kWh).
What you should know about this one
Published, verifiable facts, not brochure claims.
35–140 cfmAirflow from 35 to 140 cfm set on the built-in screen
You select the airflow on the unit's LCD screen; Virtuo then calibrates and balances the airflows automatically and keeps them balanced for the life of the product.
T-1 to T-5Five recognized installation layouts (T-1 to T-5)
At start-up the installer tells the unit, on its screen, how it is installed: fully ducted (T-1), exhaust ducted with fresh air to the furnace (T-2), simplified (T-4) or the T-3 and T-5 alternates.
63%What it still recovers at −25 °C
The only efficiency figure that matters for a Québec winter, and the one the Code uses. An efficiency quoted without its temperature means nothing; this one is measured at a test airflow of 66 cfm.
DamperIt defrosts without depressurizing the house
In cold weather, a motorized damper closes the outdoor air intake and recirculates indoor air through the core to thaw it. The house doesn't go into negative pressure during the cycle: no cold air drawn in through leaks, and none of the imbalance manufacturers warn about when there's a fireplace or a combustion appliance.
ERVIt moves moisture too, not just heat
An ERV transfers some moisture between the two airstreams. Useful in a house that gets too dry in winter or takes on a lot of humidity in summer. The trade-off: it generally recovers less heat than a comparable HRV.
−7 cfmWhat the ducts cost it
Between a nearly unrestricted test bench (0.2 in) and a real duct system (0.4 in), it drops from 140 to 133 cfm. Most spec sheets show only the first number, precisely because it looks better.
18 WMeasured at the airflow it actually runs at
Its 81% at 0 °C is measured at 36 cfm, the continuous airflow of a typical home. At that setting it draws 18 W, or about 158 kWh a year.
5 yearsThe core warranty
The core does the work and is the most expensive part to replace. Motors and parts: 5 years. We register the warranty in your name at commissioning.
6 inWhat it needs on site
6 in ducts, top connection. It needs enough clearance to slide the core out once a year.
What it needs on site
In a condo with no floor drain, or with little ceiling clearance, we usually look at a side-port model instead. Our estimator checks the location, the drain and the duct route before ordering.
Complete spec sheetData and cited sources
- Net airflow at 0.2 in. w.g.
- 140 cfm
- Net airflow at 0.4 in. w.g.
- 133 cfm
- SRE at 0 °C (36 cfm)
- 81%
- SRE at −25 °C (66 cfm)
- 63%
- ASE at 0 °C
- 88%
- Power draw
- 18 W
- Efficacy
- 2.0 cfm/W
- Type
- ERV
- Connection
- Top ports
- Duct collars
- 6 in
- Defrost cycle
- Recirculation (motorized damper)
- Filters
- Washable MERV 8 filter and washable exhaust filter included (kit SV66133)
- Dimensions (L × D × H)
- 21 × 16.3 × 21.5 in
- Power supply
- 120 V
- Warranty — core
- 5 years
- Warranty — motors
- 5 years
- Warranty — parts
- 5 years
Manufacturer's published data for this model; airflow at 0.4 in and power draw from the V160E75RT spec sheet, a model with identical published ratings. Annual consumption calculated at 18 W running continuously for 8,760 h, at Hydro-Québec's Rate D second tier (11.142 ¢/kWh), in effect since April 1, 2026.
The next model down and up
Talk to an HVAC technician before you choose
We calculate the airflow room by room, check the location and the drain, and give you an installed price. Balancing is measured at commissioning, not estimated.
VRE Venmar AVS A160E75RT – Residential air exchanger 140 CFM
At AirGreen, we know that a comfortable home depends not only on heating or air conditioning. Indoor air quality plays a vital role in daily well-being, especially in modern well-insulated homes where air can quickly become stagnant, humid, or too dry depending on the season.
The VRE Venmar AVS A160E75RT is an energy recovery ventilator designed to ensure effective air renewal while helping recover some of the energy contained in the exhausted air. With a flow rate of 140 CFM / PCM at 0.4”, a maximum sensible recovery efficiency of 81.0%, vertical connection, and a recirculation defrost cycle, this model represents a reliable solution to improve indoor comfort in homes in Montreal, Laval, Longueuil, the North Shore, and the South Shore.
The Venmar AVS A160E75RT is an excellent choice for homeowners seeking a compact, efficient residential air exchanger well suited to Quebec’s climate realities. Thanks to its VRE-type core, it not only renews indoor air but also better manages energy and humidity according to the home's conditions.
An effective ventilation solution for Quebec homes
In Quebec, homes are often very well insulated to retain heat during winter. This insulation improves energy efficiency but can also reduce natural air renewal. Without adequate ventilation, humidity, odors, CO₂, fine particles, and stale air can become trapped indoors.
The VRE Venmar AVS A160E75RT helps address this issue by expelling stale indoor air and bringing in fresh air from outside. At the same time, its recovery core limits the energy losses associated with ventilation.
Unlike simple mechanical ventilation, a VRE not only expels air from the house. It also allows for energy exchange between the outgoing and incoming air. This approach is especially beneficial in well-insulated homes, where air needs to be renewed without unnecessarily compromising indoor comfort.
Why choose the VRE Venmar AVS A160E75RT?
The Venmar AVS A160E75RT is designed to offer a good balance between airflow, efficiency, compact size, and ease of installation. With a capacity of 140 CFM, it is suitable for various residential applications where reliable and consistent ventilation is needed.
Its vertical connection is especially convenient in installations where ducts need to be directed upward. This configuration can facilitate integrating the unit in a basement, mechanical room, technical space, or when replacing an old air exchanger already installed with upper ducts.
This model is of the VRE type, which means it is designed to recover some of the energy from the exhausted air. In some homes, this type of air exchanger can be particularly useful to help maintain a better balance between ventilation, comfort, and indoor humidity.
Key point: the right choice of an air exchanger always depends on the home itself. The area, number of occupants, insulation level, humidity rate, duct configuration, and actual ventilation needs must be evaluated before recommending a model.
Main technical features
Here are the important details of the Venmar AVS A160E75RT model:
Model: A160E75RT
Brand: Venmar AVS
Type of air exchanger: VRE
Energy Star: No
Voltage: 115 V
Dimensions: 16.30 × 21.00 × 21.50 in
Manufacturer’s warranty: 5-1-0
Defrost cycle: Recirculation
Maximum sensible recovery efficiency: 81.0%
Airflow: 140.0 PCM / CFM at 0.4”
Connection: Vertical
These features make the A160E75RT a unit well suited for homes that require effective ventilation with a compact and practical design.
A flow rate of 140 CFM for reliable residential ventilation
With its flow rate of 140 PCM / CFM, the VRE Venmar AVS A160E75RT offers an attractive capacity for several types of residences. This level of ventilation allows for effective indoor air renewal when the unit is properly sized and correctly installed.
A flow rate that is too low may be insufficient to remove moisture, odors, and stale air. Conversely, an overly powerful unit may be unnecessarily oversized for some homes. The A160E75RT therefore represents a balanced choice for many residential installations.
At AirGreen, we always assess the actual needs of the home before recommending a model. Good ventilation starts with proper sizing, clean installation, and precise balancing.
Maximum sensible recovery efficiency of 81.0%
The Venmar AVS A160E75RT offers a maximum sensible recovery efficiency of 81.0%. This performance indicates that the device can recover a significant portion of the energy contained in the exhausted air before releasing it outside.
In winter, this recovery is especially useful. It allows fresh air to enter while limiting energy losses. The result is a better-ventilated, more comfortable, and more energy-efficient home.
Good energy recovery is essential to ventilate a Quebec home without unnecessarily wasting the energy already used to heat or temper the indoor space.
A VRE for better comfort balance
The A160E75RT is a VRE, meaning an energy recovery ventilator. This type of air exchanger differs from a traditional VRC because it can contribute to better energy and humidity management depending on indoor and outdoor conditions.
In a well-insulated house, indoor air can sometimes become too humid in winter or too dry depending on heating use, occupancy, and lifestyle habits. A VRE can help maintain a better comfort balance while ensuring controlled air renewal.
This type of device is particularly appealing to homeowners who want to improve indoor air quality while maintaining an efficient and intelligent approach to residential ventilation.
Virtuo technology for smarter balancing
The Venmar AVS A160E75RT is among the models designed with Virtuo technology, a technology that facilitates airflow calibration and the device’s self-balancing.
Balancing is a very important step when installing an air exchanger. If the incoming and outgoing air are not properly adjusted, performance can be reduced. Virtuo technology helps maintain a more stable and better-controlled airflow throughout the device's lifespan.
For homeowners, this means more consistent ventilation. For installers, it allows for more precise and efficient startup.
Built-in LCD screen and convenient diagnostics
The A160E75RT is also designed to simplify installation, adjustment, and maintenance. Its built-in LCD screen allows you to select the desired airflow and obtain useful information about the device's operation.
The integrated diagnostic system is also a significant advantage. It makes it easier to identify certain anomalies or adjustment needs, simplifying checks and helping to maintain good long-term performance.
A well-designed air exchanger not only facilitates installation but also maintenance and system monitoring over time.
PMSM ECM motors for reduced consumption
The Venmar AVS A160E75RT is equipped with PMSM ECM motors, designed to provide efficient ventilation with reduced electrical consumption. These motors maintain reliable airflow while using less energy than a traditional motor.
In a home where the air exchanger runs regularly, the quality of the motors is an important factor. Efficient motors contribute to comfort, system durability, and better operational stability.
This design helps to make A160E75RT a device suited to the needs of modern homes, where energy efficiency and reliability are priorities.
Recirculation defrosting: an important advantage in winter
The recirculation defrost cycle is an essential feature in a cold climate like Quebec’s. When outdoor temperatures are very low, an air exchanger can be exposed to frost formation. Recirculation defrosting helps protect the heat recovery core and maintain proper system operation.
This mode manages cold periods more steadily by temporarily recirculating indoor air to reduce frost buildup.
Recirculation defrosting is especially important to ensure reliable ventilation during the winters in Montreal, Laval, Longueuil, the North Shore, and the South Shore.
MERV 8 filtration to protect the system
The Venmar AVS A160E75RT is designed with MERV 8 filtration, which helps capture certain particles in the air and protect the internal components of the device. Good filtration helps maintain stable airflow and consistent performance.
As with any air exchanger, regular filter maintenance is essential. Dirty filters can reduce airflow, increase motor strain, and decrease the overall system efficiency.
At AirGreen, we always recommend checking and cleaning the filters based on the actual use of the device and the manufacturer's recommendations.
A convenient vertical connection for multiple configurations
The vertical connection of the Venmar AVS A160E75RT allows for convenient installation in many homes. In some mechanical spaces, ducts need to be directed upward rather than sideways. A vertical connection model can then simplify duct routing and make the installation cleaner.
This configuration is especially useful in basements, mechanical rooms, technical spaces, or replacements of old air exchangers where the existing layout favors a vertical outlet.
At AirGreen, we always check the site configuration before recommending a unit. The right model must meet both ventilation needs and installation constraints.
A compact and easy-to-integrate size
With dimensions of 16.30 × 21.00 × 21.50 in, the Venmar AVS A160E75RT offers a compact size that facilitates integration into many residential environments. It can fit installations where space is limited while providing a good ventilation capacity.
It is, however, important to allow sufficient clearance around the unit to access filters, the recovery core, ducts, and internal components.
A well-planned installation makes future maintenance easier and helps extend the air exchanger’s lifespan.
Advantages of the Venmar AVS A160E75RT
The VRE Venmar AVS A160E75RT offers several important advantages:
140 CFM airflow, suitable for many residential homes
Maximum sensible recovery efficiency of 81.0%
VRE type, for energy recovery ventilation
Vertical connection, practical for many configurations
Recirculation defrost, suited for Quebec winters
Virtuo technology, for smarter balancing
Built-in LCD screen, convenient for settings and information display
Integrated diagnostics, useful for maintenance and inspections
PMSM ECM motors, efficient and reliable
MERV 8 filtration, to protect the system
Compact size, ideal for many residential mechanical spaces
Standard 115 V voltage, convenient for residential installations
These advantages make the A160E75RT a solid option for homeowners looking for a reliable, compact, and efficient air exchanger.
Professional installation by AirGreen
Choosing the right air exchanger is important, but installation is just as crucial. A high-performance unit can lose much of its efficiency if it is poorly installed, unbalanced, or improperly connected.
At AirGreen, we install ventilation, air conditioning, heating, and HVAC systems throughout Greater Montreal. Our team understands the realities of Quebec homes: limited mechanical spaces, finished basements, existing ducts, old air exchangers to replace, humidity issues, and specific needs depending on each property.
We serve, among others:
Montreal
Laval
Longueuil
Boucherville
Brossard
Saint Bruno
Repentigny
Terrebonne
Saint-Eustache
North Shore
South Shore
Our goal is simple: to provide a clean, durable installation tailored to the real needs of each home.
Why trust AirGreen?
At AirGreen, we don’t just install a device. We analyze the home as a whole to propose a solution that truly meets the client’s needs.
We assess the layout, accessibility, existing ducts, humidity level, area, number of occupants, and homeowner expectations. This approach allows us to recommend a suitable air exchanger and carry out a professional installation.
With AirGreen, you benefit from local expertise, professional service, and comprehensive support before, during, and after installation.
A smart choice to improve indoor air quality
The Venmar AVS A160E75RT is an excellent option for homeowners who want to improve their home's ventilation with a compact, reliable, and well-designed device. Thanks to its flow rate of 140 CFM, its maximum sensible recovery efficiency of 81.0%, its recirculation defrost, and its vertical connection, it meets the needs of many Quebec residences.
In a well-insulated home, an air exchanger is often essential to maintain good indoor air quality. It helps to remove stale air, reduce excessive humidity, and bring in fresh air in a controlled manner.
In conclusion
The VRE Venmar AVS A160E75RT is a compact, efficient, and well-designed residential air exchanger. With its flow rate of 140 PCM / CFM, its maximum sensible recovery efficiency of 81.0%, its vertical connection, its recirculation defrost, and its Virtuo technology, it represents a serious solution to improve indoor air quality.
For homeowners in Montreal, Laval, Longueuil, the North Shore, and the South Shore, this model can be an excellent choice when properly sized and installed by professionals.
At AirGreen, we pride ourselves on offering ventilation solutions tailored to the real needs of our clients. Whether it's to replace an old air exchanger or to install a new system, our team is ready to assist you with precision, seriousness, and professionalism.
Contact AirGreen today to learn more about installing the Venmar AVS A160E75RT and discover the best ventilation solution for your home.