TRANE BAY24VRPAC52DC interface relay panel
Trane's communicating controls, such as the XL850 or XL1050, and ComfortLink II zoning offer advanced features.
Quick facts
Trane's communicating controls, such as the XL850 or the XL1050, and ComfortLink II zoning offer advanced features. But the equipment still has to understand them, and that is not the case for a conventional 24 V furnace, air conditioner or heat pump, whether Trane or another brand. The Trane BAY24VRPAC52DC bridges that gap: it is an interface relay panel that translates a communicating control's commands into 24 V signals that conventional equipment understands.
The bridge between a communicating control and 24 V equipment
What it does
The BAY24VRPAC52DC lets Trane communicating controls operate conventional 24 V AC HVAC equipment, regardless of brand. The control connects to the panel through a 3-wire link, and the panel controls the equipment through its relays. It handles up to 3 heating stages and 2 cooling stages on a conventional system, or 5 heating stages (2 compressor and 3 backup) with a heat pump, as well as dual fuel.
Compatible controls
The panel is designed for Trane communicating controls, including the XL850 and the XL1050, as well as for ComfortLink II zoning on 24 V equipment. For example, it allows the ComfortLink II zone panel to be used with a conventional furnace.
Auxiliary contacts
The panel has auxiliary contacts to control a central humidifier, a dehumidifier and ventilation, such as an air exchanger. The communicating control can thus manage overall indoor comfort, not just temperature.
Visual diagnostics
The LED indicators show which stages are active. At a glance, the technician sees which relays are energized, which speeds up commissioning and diagnostics.
Installation
The panel is wall-mounted and low-voltage. It runs on 24 V AC (18 to 32 V), from -40 to 150 °F and from 5 to 95% relative humidity, non-condensing, and measures 8.0 in wide, 9.3 in high and 1.9 in deep. It comes with the cover, the base, four mounting screws and anchors, four cable ties and the installation guide.
Who it is for
This module is for homeowners who want the benefits of a Trane communicating control, or of ComfortLink II zoning, without replacing their existing 24 V equipment. It also suits projects where part of the equipment is communicating and part is conventional, or homes that want to bring the humidifier, dehumidifier and ventilation under the same control.
Keep your equipment, gain comfort
Replacing a furnace or heat pump that is in good condition just to get a more advanced control makes no sense. With this module, the existing equipment stays in place and it is the control that changes. You get programming, remote access, humidity management and, if you wish, zoning, while keeping equipment that still has good years ahead of it.
Technical specifications
- Function: lets communicating controls operate conventional 24 V AC HVAC equipment of any brand
- Stages: 3 heating / 2 cooling on conventional systems; 5 heating (2 compressor + 3 backup) / 2 cooling with a heat pump; dual fuel
- Auxiliary contacts: central humidifier, dehumidifier and ventilation
- Stage LED indicators
- 3-wire link between the control and the panel
- Low-voltage wall-mounted panel
- Power: 24 V AC (18 to 32 V)
- Compatible with: Trane communicating controls, including the XL850 and XL1050; ComfortLink II zoning on 24 V equipment
- Included: cover, base, 4 screws and anchors, 4 cable ties, installation guide
- Operating range: -40 to 150 °F, 5 to 95% RH non-condensing
- Dimensions: 8.0 in W x 9.3 in H x 1.9 in D
Integration by AirGreen technicians
The installation
Our technicians identify your equipment's stages and accessories, install the panel near the indoor unit and connect each output to the matching terminals. The 3-wire link is run to the communicating control. We then configure the system and check each stage using the LED indicators: heating, cooling, backup heat, humidifier, ventilation.
Maintenance
The panel needs no special maintenance. Keep it accessible and dry. During your equipment's annual maintenance, we check that the relays and accessories are working properly.
Why AirGreen
AirGreen Inc. is a family-owned HVAC company established in Montreal for more than 15 years, holding an RBQ licence, with a showroom in Boucherville. We install furnaces, heat pumps, air exchangers and humidifiers, and we know how to integrate this equipment with Trane's most advanced controls.
For the purchase and professional installation of the Trane BAY24VRPAC52DC interface relay panel, contact AirGreen. We serve Montreal, Laval, Longueuil, the North Shore and the South Shore.
Key facts: TRANE BAY24VRPAC52DC
Four things to know, then its ID card in twelve answers. “—” means the manufacturer does not publish it.
The TRANE BAY24VRPAC52DC or its closest sibling?
The most useful comparison: the model right next to it in our catalogue.
Installed and set up by our technicians, in five steps
What we do at your place, in order. The on-site estimate is free.
- 01CompatibilityExisting system and thermostat checked before ordering.
- 02MountingInstalled in the most representative spot.
- 03ConnectionWiring or wireless pairing, depending on the model.
- 04SettingsSet-up in the thermostat or the app.
- 05TestOperation checked with you.
TRANE BAY24VRPAC52DC specifications
From the manufacturer’s sheet. Type a word: the list filters as you write.
No line matches. Try another word.
Frequently asked questions about the TRANE BAY24VRPAC52DC
Short answers, no detours.
What does the TRANE BAY24VRPAC52DC work with?
According to the manufacturer’s sheet: Trane communicating controls, including XL850 and XL1050; ComfortLink II zoning on 24 V equipment.
What is the warranty?
5 years, per the manufacturer’s information.
Does AirGreen install it?
Yes. We sell and install this product in Montréal, Laval, Longueuil, the South Shore and the North Shore. The on-site estimate is free.
No question matches. Call us at 514 316-2973.
Your thermostat, installed and set up by our technicians
We check your system and wiring, install the thermostat, connect it and program it with you. One visit, one installed price.
