A central heat pump designed for real Quebec conditions
At AirGreen, we work every day with HVAC systems installed in very concrete settings: existing homes, sometimes aging duct networks, specific electrical constraints, acoustic requirements in dense urban areas and, above all, a Quebec climate that doesn’t forgive approximations. The CANAIR R410A ADD ON Central Heat Pump | 24000 BTU – Cased Coil fits exactly this logic of technical realism. It is a central system designed to deliver stable performance in harsh winter conditions, while remaining compatible with a wide variety of residential and multi-unit configurations.
This model is for owners who want to modernize their installation without starting from scratch: adding an efficient heat pump, reducing heating costs and accessing LogisVert aid, while keeping an existing central system when it is adequate. In Montreal, Laval, Longueuil, the North Shore and the South Shore, this type of project is particularly common.
An ADD-ON design ideal for central conversion projects
The idea of an ADD ON system is often misunderstood. In practice, it lets you integrate a central heat pump with an existing system – often an electric furnace – without major structural work. This is a concrete advantage for many buildings built between the 1970s and 2000s, whose duct network still works but wastes energy.
In concrete terms, this configuration lets you:
keep the existing ducts when they are properly sized and sealed;
reduce installation costs compared with a complete replacement;
improve cooling and heating comfort;
lower overall energy use, especially in winter.
The existing electric furnace can be kept as backup, while the central heat pump handles a large part of the annual heating.
Technical data (NEEP, AHRI 211644139)
Cooling capacity: 24,000 BTU (2 tons)
Heating at -8°C: 21,000 BTU/h (COP 2.58)
Heating at -15°C: 20,000 BTU/h (COP 1.95)
Maximum capacity at -30°C: 16,000 BTU/h (COP 1.52)
SEER2 / EER2 / HSPF2 (region IV): 16.5 / 10.7 / 9.5
Refrigerant: R-410A
ENERGY STAR® cold climate certified
These values matter for owners who want a system that can carry the main heating load in winter, not just act as a shoulder-season solution.
Heating performance: consistency and stability in extreme cold
Real heating performance is the deciding factor for a central heat pump in Quebec. This model keeps 20,000 BTU/h at -15°C and keeps heating down to -30°C, which means:
more even indoor temperatures across the entire duct network;
less reliance on electric backup during prolonged cold;
stable operation thanks to inverter modulation, without aggressive cycling.
Side-discharge outdoor unit: flexibility and urban integration
The CDH2024C21 outdoor unit uses a side-discharge format, which brings concrete advantages in urban and suburban settings. This design makes it easier to:
install in tight spaces;
respect the required clearances around the unit;
manage airflow in dense areas;
reduce visual impact compared with some bulkier units.
With a maximum sound level of about 64 dB(A), this unit suits tight residential neighbourhoods, where noise is often a major concern.
“Cased Coil” indoor coil
The MAC-24HWDN1-MN0 cased indoor coil is installed on the existing furnace. Its rigid casing allows a sealed connection to the plenum and makes inspection easier, contributing to the system’s efficiency and reliability.
HVAC installation: a methodical, tailored approach
An efficient central heat pump can only reach its full potential with a rigorous HVAC installation. At AirGreen, every project with this model starts with a complete analysis:
calculation of actual heating and cooling loads;
assessment of insulation and the building envelope;
duct network check (airflow, sealing, static pressure);
electrical compatibility check (220 V, MCA 21 A, MOP 35 A).
These checks prevent efficiency losses and ensure long-term performance that meets expectations, especially in older homes.
Hydro-Québec LogisVert aid
This combination (AHRI 211644139) is on Hydro-Québec’s LogisVert list of October 27, 2026, with an indicative amount of $2,520. For many clients, this aid weighs in the decision to invest in a central heat pump rather than keep pure electric heating. The amount depends on the program’s conditions; only Hydro-Québec confirms the aid granted.
Warranty and long-term security
The CANAIR R410A ADD ON Central Heat Pump | 24000 BTU – Cased Coil is covered by a 10-year warranty on the compressor and parts. Labour is covered for 6 years, straight from the distributor, and this coverage can be extended, an option we often recommend for central systems.
Why AirGreen recommends this model
We select our products on strict criteria: real performance, compatibility with existing installations, long-term stability and a sound balance between cost and output. This model meets those requirements, which is why it is part of our central HVAC lineup.
Our experienced refrigeration technicians work under AirGreen’s RBQ licence 5645-9605-01, throughout Montreal, Laval, Longueuil, the North Shore and the South Shore. To see installations completed by our teams, visit our Our projects page.
Conclusion
Considering a central heat pump or an ADD-ON conversion of an existing system? At AirGreen, we analyze your real situation, energy needs and HVAC configuration before proposing a precise, coherent solution. Contact us at 514-316-2973 or sales@airgreen.ca for a complete assessment and a detailed quote.
Warranty: 10 years on the compressor, 10 years on parts and 6 years on labour, straight from the distributor.
