Black elegance, high efficiency and precise comfort down to –30°C, designed for homes in Greater Montreal
At AirGreen , we recommend the GREE CLIVIA R32 (black) 12,000 BTUwall-mounted heat pump to homeowners who want consistent comfort in all seasons, without compromising on aesthetics. Its anthracite gray finish blends into modern interiors, while its G20 Inverter platform and artificial intelligence algorithm continuously adapt performance to room volume , humidity , and lifestyle habits . The result: a consistent temperature, healthier air, and controlled consumption—from Montreal to Laval , from Longueuil to the North Shore and the South Shore .
What our customers remember from the first week
Heating guaranteed down to –30°C : no more uncomfortable cold snaps in January.
High efficiency : SEER2 24.5 , HSPF2 9.5 , EER2 13.0 , COP > 3.8 at 8°C for 12k BTU (AHRI 216032436 ).
Library quiet : 20 to 43 dB(A) indoors — perfect for bedroom, living room or office.
Wi-Fi included (GREE+) : Plan, monitor and optimize from your phone.
Anthracite aesthetics : the unit visually blends into the decor, without garish boxes.
Why the CLIVIA 12,000 BTU is ideal for a Montreal home
1) Precise sizing: 12,000 BTU, for which rooms?
AirGreen field rule (to be validated on site, as each home is unique):
Bedroom/closed office (12–20 m²) : 9,000 to 12,000 BTU, depending on insulation and windows.
Average living room (20–30 m²) : 12,000 BTU is often adequate, especially if the envelope is correct.
Open space : pay attention to volumes and air circulation; 15,000–18,000 BTU or multi-zone is often considered.
We analyze the surface area , ceiling height , solar orientation , windows , internal appliances (kitchen, lighting, IT) and air leaks . This approach avoids under-power (appliance that forces) as well as over-power (frequent stops/restarts, feeling of air that is too cold).
2) Consistent comfort thanks to AI and the G20 Inverter
Continuous modulation limits temperature variations: no more "cold snap" after restarting. The AI algorithm learns your scenarios (presence, humidity, inertia of the home) and adjusts the flow rate , compressor speed and dehumidification cycle . You get dry but not dried-out air , and a constant temperature without unnecessary stress.
3) Intelligent humidity management
The CLIVIA offers a target humidity range . In summer in Longueuil or Boucherville , we often aim for 45–55% : less mold, textiles that keep their shape, more restful sleep. The device adapts the fan flow and the setpoint to purify the air while limiting consumption.
4) Silence and air circulation
20 dB(A) at its lowest indoors: ideal for bedrooms .
Orientation of the shutters : we adjust the range of the breath to avoid direct flow on the face in the evening.
Positioning : aim for approximately 2.1–2.3 m height, free side and front clearance, and optimized air entanglement so that stratification (hot air at the ceiling) is minimal.
5) Operating ranges and robustness
Cooling : from –29°C to +50°C (useful in spring/autumn when the house accumulates solar gain).
Heating : from –30°C to +30°C .
Copper coils / aluminum fins , blue fins treated for 500 hours with salt spray, composite drip tray - everything is designed to last, even on exposed facades.
Technical sheet (useful summary for choice and installation)
Anti-vibration pads under the condenser, oriented to avoid resonances on the balcony/terrace.
Tightening to the correct torque and refrigeration line installed without constraints or tight bends - this is key to silence and longevity .
Electricity and protections
Suitable circuit breaker , grounding , wiring in compliance.
Easily accessible external cut-off for maintenance.
Finish : moldings matching the facade.
Examples of AirGreen installations (real returns)
Condo in Boucherville (650 sq ft, living room + office) Objective: silence and remote control . Replacement of a window air conditioner. The CLIVIA 12 k drastically reduced the noise. During heat waves, dehumidification improved the feeling of freshness without excessively lowering the setpoint. GREE+ programming: comfort temperature at 5 p.m., eco at night.
Duplex in Villeray (ground floor, semi-open area) Purpose: efficient additional heating to limit the use of baseboards. Optimized line layout (14 m) to maintain the gravity drain . Following winter: no draft felt, gentle modulation , and a comfortable maintenance around 21.5 °C during prolonged cold.
Plex in Laval (master bedroom) Constraint: light sleep, need for almost inaudible ventilation. Fan setting at low level (≈ 20 dB(A)) , shutters oriented against the wall to diffuse without direct airflow. Testimony: better quality of sleep , more stable humidity in summer.
HVAC Maintenance: The Simple Plan That Preserves Performance
Every month during high season : rinse or vacuum the filters .
Annual : inspection of coils , drip tray , fans , seals ; electrical and functional check.
Exterior : clearing the condenser (plants, snow), checking the support and the pads .
Wi-Fi : Update the GREE+ app and adapt your schedule scenarios to the season.
Signs that should make you call AirGreen : decreased performance, unusual noises, droplets at the bottom of the wall, damp smell, error messages, short cycle times. Early intervention prevents breakdowns.
Tips for saving money without sacrificing comfort
Instructions : for heating, aim for 21–22°C ; for cooling, 23–24°C with dehumidification .
Fan speed : Leave on Auto most of the time; set to Low at night in a bedroom.
Open doors : for semi-open areas, leave intermediate doors ajar to promote diffusion.
Sun : Close the blinds in the afternoon facing southwest during heat waves; you will reduce power demands.
Programs : Use the start/return slots to smooth the load and stabilize the humidity.
AirGreen Grants, Guarantees and Options
Provincial grant (LogisVert) : $1,200 announced for the CLIVIA 12,000 BTU (updated July 17, 2025 , subject to eligibility and budget).
Original warranty : 12-12-0 ( compressor 12 years , parts 12 years , labor as per contract).
Additional warranty : possibility of adding labor for maximum peace of mind.
AirGreen transparency : no deposit , final written offer before work, payment at the end when you are satisfied.
100% free on-site estimate : we validate the dimensions , route and finish , then you receive a clear proposal .
Common mistakes… and how to avoid them
Undersizing an open area : persistent discomfort; we measure and suggest the right size or a multi-zone .
Ignore condensation : risk of odor and stains; we design reliable drainage from the design stage.
Incorrect location of the condenser : resonances, noise from the neighbor; we orient and detach correctly.
Unsuitable power supply : incorrectly calibrated circuit breaker; we secure the electrical installation to standards.
Additional details you'll appreciate every day
Clear LCD remote control , paired out-of-the-box.
Wired thermostat (optional) for those who prefer traditional wall control.
Self-cleaning of the indoor unit: limits dirt and odors.
Comfort modes : Night, Turbo, Economy — profiles adapted to your routines.
Aesthetics : Anthracite black highlights white walls and contemporary kitchens; no need for bulky covers.
Why choose AirGreen?
Certified refrigeration technicians , mastering the fine installation of lines and commissioning according to best practices.
Complete support : from technical visit to Wi-Fi configuration , with seasonal advice.
Responsive after-sales service : fast diagnostics, available parts , scheduled HVAC maintenance .
Local presence : Montreal (office), South Shore (showroom in Boucherville), interventions in Laval , Longueuil , North Shore and South Shore .
Quick Summary — CLIVIA 12,000 BTU (Black)
4-season comfort : heating down to –30°C , stable cold up to 50°C
Efficiency : SEER2 24.5 | HSPF2 9.5 | EER2 13.0
Quietness : 20–43 dB(A) indoors
Connectivity : GREE+ Wi-Fi included
AirGreen installation : clean tracing, careful finishing , no deposit , payment at the end
Next Step
Ready to improve the comfort of your home in Montreal , Laval , Longueuil , North Shore or South Shore ? Contact AirGreen at 514-316-2973 or email sales@airgreen.ca . Get a 100% free on-site estimate , accurate sizing , and warranty options tailored to your needs.
How to enable WiFi on your Gree with the GREE+ app
Gree heat pumps all have the WiFi function included or optional. It is possible to adjust the various functions of this mini split directly from your smart phone. It takes 2 minutes and will help you use your Gree to its full potential!