Floor Heating Thermostat STELPRO CONCERTO WI-FI STF362WF | Montreal, Laval, Longueuil, South Shore and North Shore
In the morning, you step onto ceramic tile that's already warm.
Quick facts
In the morning, you step onto tile that's already warm. In the evening, when you get home earlier than planned, you bring the bathroom heat back up from your phone before you've even taken your coat off. That's exactly what the Stelpro CONCERTO WI-FI STF362WF floor heating thermostat lets you do: a line-voltage thermostat designed for electric heating cables and mats, with a Wi-Fi connection that puts you back in control of your floor wherever you are.
At AirGreen, we install it in bathrooms, basements, kitchens and vestibules for our customers across Greater Montreal. It's made for homeowners who want the comfort of a warm floor without giving up control over their energy use, especially through the long months of heating in Quebec.
A connected heated floor, built for everyday life in Quebec
Which systems it works with
The CONCERTO WI-FI is made for electric floor heating using cables or mats. It runs on 120, 208 or 240 V and controls the load directly, up to 1800 W at 120 V, 3120 W at 208 V and 3600 W at 240 V, or 15 A. It isn't a thermostat for a furnace, a central heat pump or a hydronic system: it's strictly for electric heating elements embedded under the floor covering. For a large area whose load goes beyond these values, it pairs with CONCERTO EXPANSION STF362XU expansion units, so you don't end up with a row of thermostats on the wall.
Three ways to control the heat
The thermostat offers three modes. In Floor (F) mode, it relies on the floor sensor and keeps the surface at the temperature you want, which works well in a bathroom where the warmth underfoot is what matters most. In Room (R) mode, it uses its built-in sensor and controls the air temperature in the room, a logical option when the heated floor is the main source of heat. Room with floor limit (RF) mode combines the two: the room is heated based on the air temperature, while the floor is kept from going past a set limit. That's the setting we often recommend under engineered wood or vinyl floors, which are more sensitive to heat. Maximum temperature protection rounds it all out.
The floor setting range is 5 to 40 °C (41 to 104 °F), and the room air range is 0 to 40 °C (32 to 104 °F). The digital display can be set to °C or °F, whichever you're used to.
Wi-Fi for comfort and savings
With the Wi-Fi connection, you adjust the setpoint and the schedule from the mobile app. The unit comes pre-programmed with 4 periods on weekdays and 2 periods on weekends, a starting point you then adapt to your routine: warm floor when you get up, a setback during work hours, comfort again before supper, and a lower setting at night. If your schedule changes, say for a week of vacation, you change the program remotely instead of heating an empty room.
In winter, an electric heated floor can run for several hours a day. Being able to lower the setpoint when nobody's using the room, and bring it back up just before you get home, is a simple way to keep your electricity use down without giving up comfort. Programming does this automatically, and Wi-Fi lets you override it when life gets in the way.
Built-in electrical safety
The STF362WF has a built-in Class A ground fault circuit interrupter (GFCI) with a test light, an important safeguard in a damp room like a bathroom. It has a terminal block and a double-pole (DPST) switch that cuts both poles of the power supply. The 15 ft (4.5 m) floor sensor is included, and the thermostat also works with other manufacturers' sensors, a real advantage when you're replacing an old thermostat on an existing floor whose sensor is already embedded in concrete or mortar.
Where it fits in the CONCERTO family
The CONCERTO lineup shares the same electrical platform and the same sensor. The CONCERTO WI-FI STF362WF is the only one in the family with a Wi-Fi connection and Bluetooth setup; it's for people who want to control their floor remotely. The CONCERTO TOUCH STF362PTS focuses instead on a colour touchscreen and an energy use log, without Wi-Fi. The CONCERTO STF362P is the programmable version with a large backlit screen, and the CONCERTO BASIC STF362NP is the manual, non-programmable version. If you're often away or the room is used at irregular hours, the Wi-Fi model gives you the most flexibility.
Technical specifications
- Systems: electric floor heating (cables or mats)
- Power: line voltage, 120/208/240 V; maximum 1800 W at 120 V, 3120 W at 208 V, 3600 W at 240 V (15 A)
- Connectivity: Wi-Fi (mobile app); Bluetooth for installer setup
- Programming: pre-programmed with 4 periods on weekdays and 2 periods on weekends, can be changed remotely
- Modes: Floor (F), Room (R), Room with floor limit (RF)
- Maximum temperature protection
- Sensors: 15 ft (4.5 m) floor sensor included and built-in room sensor; compatible with other manufacturers' sensors
- Setting range: floor 5 to 40 °C (41 to 104 °F); room 0 to 40 °C (32 to 104 °F)
- Digital display, °C or °F
- Built-in Class A GFCI with test light
- Terminal block and double-pole (DPST) switch that cuts both poles
- Compatible with CONCERTO EXPANSION STF362XU expansion units
- White moulded plastic housing
Installation, setup and maintenance by AirGreen
An installation done by the book
A line-voltage thermostat connects directly to the floor's power circuit. Our technicians first check the total load of the cables or mat to confirm it's within the thermostat's capacity at your home's voltage. They measure the resistance of the heating elements and the sensor before wiring anything, which catches a damaged element before anything gets closed up. If the area needs more than 15 A, we plan for one or more CONCERTO expansion units.
Once the thermostat is in place, Bluetooth setup from the app lets us choose the control mode, the floor limit and the installation settings without a lot of tedious button-pushing on the screen. Then we connect the unit to your Wi-Fi network, test the GFCI with you and adjust the starting schedule to fit your habits.
Day to day
Once the schedule is set, most of our customers barely touch the thermostat again. A few practical tips: pick RF mode if your flooring is sensitive to heat, keep a moderate floor temperature overnight instead of shutting it off completely, and use the app to pause the heating when the house will be empty for several days.
Maintenance
The thermostat needs very little maintenance. Press the GFCI test button once a month to make sure the protection trips, then reset it. Clean the housing with a dry cloth, with no liquid cleaners, and avoid covering the unit or putting a heat source right below it, since that would throw off the room sensor's reading. If the floor temperature seems off, get in touch with us: checking the sensor and the connections usually sets things right.
Why trust AirGreen with this project
AirGreen Inc. is a family-owned HVAC company that has been based in Montreal for more than 15 years, with an RBQ licence and a showroom in Boucherville. We install thermostats, wall-mounted heat pumps, central systems and electric heating, so we look at your heated floor as part of your overall indoor comfort, not as a standalone device. Our technicians work clean, explain their settings and leave you with a thermostat that's ready to use.
To buy the Stelpro CONCERTO WI-FI STF362WF thermostat and have it professionally installed, contact AirGreen. We serve Montreal, Laval, Longueuil, the North Shore and the South Shore, and we'd be happy to plan your project with you.
Stelpro documents
Key facts: STELPRO CONCERTO WI-FI STF362WF
Four things to know, then its ID card in twelve answers. “—” means the manufacturer does not publish it.
Is the STELPRO CONCERTO WI-FI STF362WF compatible with your heating?
Two steps, thirty seconds. The verdict takes your system and your wiring into account.
Full compatibility table
How a floor heating thermostat connects
Tap an element to see what it does. A working diagram, not a substitute for the manufacturer’s installation guide.
Try the STELPRO CONCERTO WI-FI STF362WF before you buy
Raise the setpoint, change the mode: see how it responds.
How much good programming can save you
Set up your typical week. The math follows the rule published by Natural Resources Canada.
Winter, Rate Flex D and rebates: what this thermostat changes
With Hydro-Québec’s Rate Flex D, electricity costs less most of the winter and more during a few peak hours. A programmable thermostat does the work for you.
The STELPRO CONCERTO WI-FI STF362WF or its closest sibling?
The most useful comparison: the model right next to it in our catalogue.
The right thermostat in three questions
If this model is not the right one for you, the page says so and shows you which one is.
Products that go with the STELPRO CONCERTO WI-FI STF362WF
Parts named in its spec sheet that we sell and install.
Installed and set up by our technicians, in five steps
What we do at your place, in order. The on-site estimate is free.
- 01CheckHeating cable, probe and circuit load.
- 02Shut-offBreaker shut off at the panel.
- 03MountingHeating cable and probe wiring, mounting.
- 04TestPower back on and floor check.
- 05SettingsFloor temperature limits, schedule, connection.
STELPRO CONCERTO WI-FI STF362WF specifications
From the manufacturer’s sheet. Type a word: the list filters as you write.
No line matches. Try another word.
Frequently asked questions about the STELPRO CONCERTO WI-FI STF362WF
Short answers, no detours.
What does the STELPRO CONCERTO WI-FI STF362WF work with?
According to the manufacturer’s sheet: electric floor heating (cables or mats).
Who installs it?
Our technicians: the circuit is shut off at the panel, the heater load is checked, then the thermostat is wired and tested.
Can it be controlled remotely?
Yes, over Wi-Fi.
What is the warranty?
3 years, per the manufacturer’s information.
Does AirGreen install it?
Yes. We sell and install this product in Montréal, Laval, Longueuil, the South Shore and the North Shore. The on-site estimate is free.
No question matches. Call us at 514 316-2973.
Your thermostat, installed and set up by our technicians
We check your system and wiring, install the thermostat, connect it and program it with you. One visit, one installed price.


