Electronic Thermostat HONEYWELL TH114-A-240S-B/U | Montreal, Laval, Longueuil, South Shore & North Shore
Replacing the old mechanical thermostats of an entire home with electronic controls is one of the most tangible upgrades you can make to baseboard heating.
Quick facts
Replacing the old mechanical thermostats of an entire home with electronic controls is one of the most tangible upgrades you can make to baseboard heating. The Honeywell TH114-A-240S-B/U is particularly well suited to this kind of project. Non-programmable, it's set like a traditional thermostat, but with the precision of electronic regulation and the readability of a backlit screen. Its slim, contemporary housing fits in with today's decor. For bedrooms, secondary rooms and homes where people prefer to adjust the temperature by hand, it's a straightforward solution, with no menus or schedule to set up.
Simplicity, with electronic regulation
The TH114-A-240S-B controls electric baseboard heaters, radiant ceilings, convectors and forced-air heaters on 240 V or 208 V circuits. Its maximum load is 16.7 A resistive, or 4000 W at 240 V or 3475 W at 208 V. Switching is single-pole (SPST), through an epoxy-coated relay that reduces noise, at 4 cycles per hour. Stated accuracy is ±0.5 °C, and advanced regulation limits temperature swings between two cycles.
What changes compared to a mechanical thermostat
A bimetal thermostat reacts slowly and often lets the room cool down or warm up by several degrees before it kicks in. The TH114-A reads the temperature electronically and displays it in numbers, which puts an end to guesswork settings. The heating power indicator on the screen shows when the baseboard heaters are powered. The display can be set to Celsius or Fahrenheit. The ON/STANDBY switch lets you put the heating to rest for the summer, without disconnecting anything.
No batteries, no maintenance
The thermostat is wired directly to the circuit and needs no batteries. Once it's installed, there's nothing to keep an eye on. It's compatible with the Aube CT240/CT241 telephone controller and carries UL and CSA approvals (CAN/CSA-C828-06).
Technical specifications
- Stage: 1 heating, resistive electric heat
- Equipment: electric baseboard heaters, radiant ceilings, convectors or forced-air heaters
- Voltage: 240/208 VAC, 50/60 Hz
- Maximum load: 16.7 A resistive (4000 W at 240 V, 3475 W at 208 V)
- Single-pole switching (SPST); epoxy-coated relay; 4 cycles per hour
- Non-programmable
- Display: backlit LCD; heating power indicator; Celsius or Fahrenheit
- ON/STANDBY switch for the end of the season
- Accuracy: ±0.5 °C
- Setting range: 5 to 30 °C (40 to 86 °F)
- Compatible with the Aube CT240/CT241 telephone controller
- UL/CSA approvals (CAN/CSA-C828-06); hardwired, no batteries
- Connectivity: none
- Dimensions: 124 x 70 x 23 mm (4.9 x 2.8 x 0.9 in.)
- Colour: white
Our installation method
Every installation follows the same steps: breaker off, check for no voltage, identify the conductors, check the wattage connected to the circuit, connect, mount, power back on and test. This rigour protects your heating equipment and the thermostat itself, which must never control a load above its capacity. Our technicians also take the time to explain the display and buttons, set the starting setpoint and answer your questions about winter use.
Everyday use
Two buttons are all you need: one to raise the temperature, one to lower it. The backlit screen is easy to read, even in a dimly lit bedroom at night. For a whole house, we recommend setting a consistent setpoint from one room to the next, then lowering it by a few degrees in rooms that are rarely used. Since the thermostat has no clock to set, no adjustment is needed when the time changes or after an outage. That simplicity makes it a popular choice with owners of rental units and families who don't want to manage a schedule.
Fewer swings, less waste
Older thermostats often let the temperature swing before reacting. Occupants then compensate by turning up the setpoint, which increases consumption. A more accurate control fixes that: the room stays close to the chosen temperature, and you can set it a little lower without losing comfort. Add the habit of turning the setting down at night and during longer absences, and you have a simple way to save throughout the cold season.
TH114-A or TH115-A
The TH114-A and TH115-A lines share the same 124 x 70 x 23 mm housing. The difference is programming: the TH114-A-240S-B/U is non-programmable, while the TH115-A-240S-B/U adds 7-day programming, early start, Vacation mode and automatic time change. Within the TH114-A line, the 240S version is single-pole and handles 4000 W at 240 V, the 240D version is double-pole and handles 3600 W, and the 120S version is meant for 120 V circuits. In the same home, it's actually common to combine programmable models in living areas and TH114-A units in secondary rooms.
Practical tips
At the start of the cold season, check that every thermostat in the house shows a consistent temperature and that the heaters respond. Dust the baseboard heaters, with the breaker off, and keep furniture and curtains away from them. The rest of the year, a wipe of the housing with a dry cloth is enough. If a room always seems colder than the others despite the same setpoint, the location of the control, the insulation or the installed wattage may be the cause; our technicians can assess the situation.
One point of contact, from selection to start-up
At AirGreen, the person who advises you works with the technicians who come to your home. That continuity avoids misunderstandings: the model ordered matches your installation, the wiring is checked on site and the settings are made to suit your lifestyle. A family business established for more than 15 years and holding an RBQ licence, we serve homeowners, authorized tenants and building managers in Montréal, Laval, Longueuil, the North Shore and the South Shore. We know the region's housing stock well, from 1950s duplexes to new suburban homes, and we know what surprises an old wall box can hold. You can also stop by our Boucherville showroom to compare controls before making your choice.
To get this thermostat installed to professional standards, reach out to the AirGreen team. We serve Montréal, Laval, Longueuil, the North Shore and the South Shore, and we take care of everything: system check, product supply, installation, testing and an explanation of the settings.
Key facts: HONEYWELL TH114-A-240S-B/U
Four things to know, then its ID card in twelve answers. “—” means the manufacturer does not publish it.
Is the HONEYWELL TH114-A-240S-B/U compatible with your heating?
Two steps, thirty seconds. The verdict takes your system and your wiring into account.
Full compatibility table
A thermostat that works on 120/240 V
Tap an element to see what it does. A working diagram, not a substitute for the manufacturer’s installation guide.
Try the HONEYWELL TH114-A-240S-B/U before you buy
Raise the setpoint, change the mode: see how it responds.
Winter, Rate Flex D and rebates: what this thermostat changes
With Hydro-Québec’s Rate Flex D, electricity costs less most of the winter and more during a few peak hours. Turning the setpoint down a few degrees during those hours is what counts.
What each room costs
An interactive drawing of what this kind of control does day to day.
The HONEYWELL TH114-A-240S-B/U or its closest sibling?
The most useful comparison: the model right next to it in our catalogue.
The right thermostat in three questions
If this model is not the right one for you, the page says so and shows you which one is.
Products that go with the HONEYWELL TH114-A-240S-B/U
Parts named in its spec sheet that we sell and install.
Installed and set up by our technicians, in five steps
What we do at your place, in order. The on-site estimate is free.
- 01LoadWe add up the heaters on the circuit and check the thermostat’s range.
- 02Shut-offBreaker shut off at the panel, 2- or 4-wire circuit identified.
- 03MountingWiring, mounting, power back on.
- 04TestHeating checked room by room.
- 05SettingsSchedule, connection and app if the model has them.
HONEYWELL TH114-A-240S-B/U specifications
From the manufacturer’s sheet. Type a word: the list filters as you write.
No line matches. Try another word.
Frequently asked questions about the HONEYWELL TH114-A-240S-B/U
Short answers, no detours.
What does the HONEYWELL TH114-A-240S-B/U work with?
According to the manufacturer’s sheet: electric baseboards, radiant ceilings, convectors or forced-air units.
What load can it control?
Up to 4,000 W at 240 V, per the manufacturer’s sheet.
Who installs it?
Our technicians: the circuit is shut off at the panel, the heater load is checked, then the thermostat is wired and tested.
Can it be controlled remotely?
Not directly: it has no built-in Wi-Fi.
What is the warranty?
3 years, per the manufacturer’s information.
Does AirGreen install it?
Yes. We sell and install this product in Montréal, Laval, Longueuil, the South Shore and the North Shore. The on-site estimate is free.
No question matches. Call us at 514 316-2973.
Your thermostat, installed and set up by our technicians
We check your system and wiring, install the thermostat, connect it and program it with you. One visit, one installed price.

