Electronic Thermostat HONEYWELL TH115-A-120S/U | Montreal, Laval, Longueuil, South Shore & North Shore
Not all electric heating appliances are powered at 240 V.
Quick facts
Not all electric heating appliances are powered at 240 V. In some homes, additions or commercial spaces, the baseboards, convectors or forced-air heaters run on 120 V. A thermostat designed for 240 V isn't suitable for these circuits. The Honeywell TH115-A-120S/U brings these installations the best of what the TH115-A line has to offer: 7-day programming, a large backlit display, a standby switch, battery-free backup and automatic clock change. Rooms heated at 120 V can enjoy the same programmed comfort as the rest of the house.
7-day programming for 120 V circuits
The TH115-A-120S controls electric baseboards, radiant ceilings, convectors and forced-air heaters powered at 120 V. Its maximum load is 16.7 A resistive, or 2,000 W at 120 V. Its single-pole (SPST) switching goes through an epoxy-encapsulated relay, which keeps noise down with each cycle. Advanced temperature control reduces swings, so the room stays close to the setpoint.
A solution for the exceptions
120 V heating circuits are found mainly in rooms added after the house was built, in commercial spaces or in finished basement areas. These rooms are often forgotten during a thermostat upgrade, because the usual models don't suit them. The TH115-A-120S/U lets you bring the whole house in line with the same programmable control, the same interface and the same habits. Our technicians measure the circuit voltage before installation: a 120 V thermostat must never be installed on a 240 V circuit, and the reverse is just as true.
Features of the line
Programming of four periods per day over 7 days, Early Start, temporary override, hidden programming buttons, Vacation mode and automatic clock change: the TH115-A-120S has every feature of its 240 V siblings. The ON/STANDBY switch puts the heating to rest at the end of the season, and battery-free backup means no reprogramming after a power outage. The thermostat is compatible with Aube RC840 series relays and with the Aube CT240/CT241 telephone controller.
Technical specifications
- Stage: 1 heating, resistive electric heating
- Appliances: electric baseboards, radiant ceilings, convectors or forced-air heaters
- Voltage: 120 VAC, 50/60 Hz
- Maximum load: 16.7 A resistive (2,000 W at 120 V)
- Single-pole switching (SPST relay), epoxy-encapsulated
- 7-day programmable, 4 periods per day
- Large backlit LCD display; heating power indicator
- ON/STANDBY switch for the end of the season
- Early Start; temporary override; hidden programming buttons
- Vacation mode; automatic clock change
- Battery-free backup: no reprogramming after a power outage
- Setpoint range: 5 to 30 °C (40 to 86 °F)
- Compatible with Aube RC840 relays and the Aube CT240/CT241 telephone controller
- UL and CSA approvals (CAN/CSA-C828-06); hardwired, no batteries
- Dimensions: 124 x 70 x 23 mm (4.9 x 2.8 x 0.9 in.)
- Colour: white
From an old mechanical thermostat to electronic control
Many homes in the region still have bimetal thermostats that let the temperature drift several degrees before reacting. Switching to electronic control takes a short visit. Our technicians shut off power at the panel, verify that no voltage is present, remove the old unit and connect the new one to suit the voltage and load of the electric heating circuit. They then set the basic parameters, run a heating test and show you how to adjust the setpoint. We can handle a single room or the whole house, depending on your needs.
The same interface throughout the house
One of the advantages of the TH115-A-120S/U is that it offers exactly the same interface as the 240 V TH115-A models. If your bedrooms and living room have the 240 V version and your basement or heated sunroom runs on 120 V, everyone uses the same control the same way. We set the time and programming of each thermostat at startup, based on how each room is used: an office can follow a daytime schedule, a playroom an evening and weekend schedule. The 23 mm thick housing stays discreet on the wall.
Making good use of programming in winter
Many homeowners buy a programmable thermostat and then leave it in manual mode. That's a shame, because the schedule is exactly the tool that turns the control into a source of savings. For a home that's occupied in the evening and on weekends, four periods per day are plenty: wake up, leave, return and bedtime. During deep cold spells, it's best to avoid setbacks that are too steep, which force the heating to make up a large gap. A moderate, steady setback gives the best balance between comfort and consumption.
The 120S within the TH115-A line
The TH115-A-120S/U is the only 120 V version in the TH115-A line voltage range. The TH115-A-240S-B/U (single-pole, 4,000 W at 240 V) and TH115-A-240D-B/U (double-pole, 3,600 W at 240 V) are meant for 240 V and 208 V circuits, which are much more common for residential baseboards. If your 120 V room doesn't need programming, the TH114-A-120S/U offers the same housing in a non-programmable version. So the choice depends first on the voltage, then on how interested you are in programming.
Durability and safety
Electronic controls are designed to run for many years without servicing. To keep them in good shape, avoid direct moisture, spray cleaners and impacts. Never use a thermostat to control a load greater than its capacity, even temporarily, for example by adding a baseboard to an existing circuit without checking. If you're planning renovations that affect your heating, talk to our technicians, who will check that the existing control is still suitable.
AirGreen, your heating and air conditioning contractor
AirGreen Inc. is a family business in air conditioning and heating that has been active in Montréal for more than 15 years. Holding an RBQ licence, our team installs, replaces and maintains HVAC systems throughout Montréal, Laval, Longueuil, the North Shore and the South Shore. The thermostat is the part you touch every day, so we treat it as seriously as the equipment it controls. Before recommending a model, we look at what is actually behind your wall, meaning the number of wires, the voltage and the type of equipment, so the control we choose works properly from the very first startup. Our Boucherville showroom also lets you see several thermostats in person and talk them over with an advisor.
To replace your current control, contact AirGreen today for the sale and installation of this model by our technicians, anywhere in Montréal, Laval, Longueuil, the North Shore and the South Shore. We check your installation, book an appointment and leave the thermostat programmed to your schedule.
Key facts: HONEYWELL TH115-A-120S/U
Four things to know, then its ID card in twelve answers. “—” means the manufacturer does not publish it.
Is the HONEYWELL TH115-A-120S/U compatible with your heating?
Two steps, thirty seconds. The verdict takes your system and your wiring into account.
Full compatibility table
A thermostat that works on 120/240 V
Tap an element to see what it does. A working diagram, not a substitute for the manufacturer’s installation guide.
Try the HONEYWELL TH115-A-120S/U before you buy
Raise the setpoint, change the mode: see how it responds.
How much good programming can save you
Set up your typical week. The math follows the rule published by Natural Resources Canada.
Winter, Rate Flex D and rebates: what this thermostat changes
With Hydro-Québec’s Rate Flex D, electricity costs less most of the winter and more during a few peak hours. A programmable thermostat does the work for you.
What each room costs
An interactive drawing of what this kind of control does day to day.
The HONEYWELL TH115-A-120S/U or its closest sibling?
The most useful comparison: the model right next to it in our catalogue.
The right thermostat in three questions
If this model is not the right one for you, the page says so and shows you which one is.
Products that go with the HONEYWELL TH115-A-120S/U
Parts named in its spec sheet that we sell and install.
Installed and set up by our technicians, in five steps
What we do at your place, in order. The on-site estimate is free.
- 01LoadWe add up the heaters on the circuit and check the thermostat’s range.
- 02Shut-offBreaker shut off at the panel, 2- or 4-wire circuit identified.
- 03MountingWiring, mounting, power back on.
- 04TestHeating checked room by room.
- 05SettingsSchedule, connection and app if the model has them.
HONEYWELL TH115-A-120S/U specifications
From the manufacturer’s sheet. Type a word: the list filters as you write.
No line matches. Try another word.
Frequently asked questions about the HONEYWELL TH115-A-120S/U
Short answers, no detours.
What does the HONEYWELL TH115-A-120S/U work with?
According to the manufacturer’s sheet: electric baseboards, radiant ceilings, convectors or forced-air units.
Who installs it?
Our technicians: the circuit is shut off at the panel, the heater load is checked, then the thermostat is wired and tested.
Can it be controlled remotely?
Not directly: it has no built-in Wi-Fi.
What is the warranty?
3 years, per the manufacturer’s information.
Does AirGreen install it?
Yes. We sell and install this product in Montréal, Laval, Longueuil, the South Shore and the North Shore. The on-site estimate is free.
No question matches. Call us at 514 316-2973.
Your thermostat, installed and set up by our technicians
We check your system and wiring, install the thermostat, connect it and program it with you. One visit, one installed price.

