Thermostat HONEYWELL MultiPRO 7000 TB7100A1000/U | Montreal, Laval, Longueuil, South Shore & North Shore

In stock
SKU: TB7100A1000/U

Apartment buildings, hotels, seniors’ residences and condo towers often use equipment that ordinary residential thermostats control poorly: 2- or 4-pipe fan coils, PTACs (packaged through-the-wall air conditioners), small heat pumps.

1H/1Cstages
Programmablebuilt-in schedule
2 yearsmanufacturer warranty
Programmable
Get my installed price 514 316-2973

Quick facts

Model numberTB7100A1000/U
ProgrammableYes
Wi-FiNo
Touch screenNo
ENERGY STARNo
Warranty2 years

Apartment buildings, hotels, seniors' residences and condo towers often use equipment that ordinary residential thermostats control poorly: 2- or 4-pipe fan coils, PTACs (packaged through-the-wall air conditioners), small heat pumps. These units have multi-speed fans and their own control logic. The Honeywell MultiPRO 7000 TB7100A1000/U is a multi-speed, multi-purpose thermostat designed for them, while remaining compatible with conventional systems and heat pumps.

One thermostat for several types of equipment

The MultiPRO 7000 adapts to four families of equipment:

  1. conventional systems: 1 heating stage and 1 cooling stage;
  2. heat pumps: up to 2 heating stages and 1 cooling stage;
  3. fan coils with 2 or 4 pipes;
  4. PTACs: up to 2 heating stages and 1 cooling stage.

For a building manager, it's a practical advantage: the same thermostat model can equip different units, which simplifies training for maintenance staff and the management of spare parts. When equipment is replaced, for example switching from a PTAC to a small heat pump, the thermostat can often stay in place and simply be reconfigured.

The multi-speed fan

The MultiPRO 7000 controls a 3-speed fan on fan coils and 2 speeds on PTACs. Its VersaSpeed ramp-up and reset algorithms adjust the fan speed based on the gap between the room temperature and the setpoint: a higher speed when the room is far from the setpoint, a lower speed as it gets closer. The result is steadier comfort and quieter operation, an important point in a hotel room or an apartment.

Programmable or not, depending on use

The thermostat can be set to 7-day programmable mode, with up to 4 periods per day, or to non-programmable mode. In a rental unit, non-programmable mode is often better for simplicity; in an office or a common room, programming lets you reduce heating and cooling outside occupied hours. Holiday override handles closure periods.

The real-time clock keeps the time during a power outage and adjusts for daylight saving time. Programming is done through menus, and the thermostat can be removed from the wall to be programmed.

Remote sensors and occupancy

The MultiPRO 7000 accepts a remote indoor air sensor (20 K or 10 K ohms), useful when the thermostat is installed in a spot that isn't representative, for example near the door of a hotel room. It also has an occupancy sensor input. In a hotel or a residence, an occupancy sensor or a key card contact can tell the thermostat that a room is empty so it switches to economy mode.

Installation and commissioning by AirGreen

The MultiPRO 7000 runs on 24 VAC or batteries. In a building, we prefer 24 VAC power when the equipment provides it. Our technicians:

  1. identify the type of equipment in each unit: conventional, heat pump, 2- or 4-pipe fan coil, PTAC;
  2. check the wiring, the presence of 24 VAC and the fan outputs;
  3. install the thermostat and configure the system type and the number of speeds;
  4. connect the remote sensor or the occupancy sensor, if applicable;
  5. choose programmable or non-programmable mode with you and set the schedule;
  6. test heating, cooling and each fan speed.

The Premier White housing blends in discreetly in rooms, hallways and common areas. In an occupied building, we plan the replacement unit by unit to limit disruption for residents.

Energy savings in buildings

In a building or a hotel, dozens of units run at the same time. Every degree saved during unoccupied periods is multiplied by the number of rooms. Programming, occupancy detection and fan speed modulation reduce energy use throughout the Québec winter, without sacrificing occupant comfort when they're present.

The MultiPRO in the Honeywell commercial family

The CommercialPRO 7000 (TB7220U1012/U) is better suited to rooftop units and multi-stage commercial forced-air systems. The SuitePRO (TB6575A1000/U), for its part, is a non-programmable line voltage fan coil thermostat. The MultiPRO 7000 stands out for its versatility: fan coils, PTACs, heat pumps and conventional systems, on 24 VAC, with optional programming and sensor inputs.

Maintenance

If the thermostat runs on batteries, replace them regularly. Dust the housing and make sure nothing blocks the airflow around it. For fan coils and PTACs, cleaning the filters and coils is essential: we can take care of that maintenance.

Technical specifications

  • Type: multi-speed, multi-purpose thermostat, programmable or non-programmable (your choice)
  • Stages: 1H/1C conventional; up to 2H/1C heat pump; 2- or 4-pipe fan coil; up to 2H/1C PTAC
  • Systems: conventional, heat pump, fan coil (2/4-pipe), PTAC
  • Fan: 3 speeds on fan coil, 2 on PTAC; VersaSpeed ramp-up and reset algorithms
  • Programming: 7-day, up to 4 periods per day, or non-programmable
  • Clock: real-time, kept during an outage, daylight saving time adjustment
  • Functions: holiday override, menu-driven programming, off-wall programming
  • Inputs: remote indoor air sensor (20 K or 10 K ohms); occupancy sensor
  • Power: 24 VAC or batteries
  • Display: large backlit screen (temperature, setpoint, time)
  • Colour: Premier White

Why AirGreen

AirGreen is a family HVAC business with an RBQ licence that has served homes, buildings and businesses in the Montréal area for more than 15 years. We plan work in occupied buildings to limit disruption, and we configure each thermostat for the unit's equipment. Our showroom is in Boucherville.

For the sale and professional installation of the Honeywell MultiPRO 7000 TB7100A1000/U thermostat, contact AirGreen. We serve Montréal, Laval, Longueuil, the North Shore and the South Shore.

01 · Key facts

Key facts: HONEYWELL MultiPRO 7000 TB7100A1000/U

Four things to know, then its ID card in twelve answers. “—” means the manufacturer does not publish it.

Type24 V thermostatHONEYWELL MultiPRO 7000 TB7100A1000/U
Forconventional, heat pump, fan coilSystems
Power24 VAC or battery-poweredPower supply
Capacity1H/1C conventionalStages
02 · Compatible?

Is the HONEYWELL MultiPRO 7000 TB7100A1000/U compatible with your heating?

Two steps, thirty seconds. The verdict takes your system and your wiring into account.

Full compatibility table

Heating systemVerdictWhy
Central heat pumpYesThe spec sheet lists heat pumps.
Dual energy (heat pump + furnace)Depends on the modelHeat pump yes; dual-energy control is confirmed on site.
Electric furnaceYes24 V control of the furnace.
Gas or oil furnaceYes24 V control of the furnace; the thermostat does not touch the fuel supply.
Steam, gravity or hot waterDepends on the modelPossible in 24 V: see the manufacturer’s sheet.
Baseboards, convectors, radiant ceilingNoA baseboard runs on 120/240 V: it needs a line-voltage electronic thermostat.
Fan-forced heaterNoA fan-forced heater needs a line-voltage thermostat rated for fans.
Electric floor heatingNoElectric floor heating needs a floor thermostat with a probe.
Wall or ducted mini-split heat pumpNoA wall heat pump is controlled by its own brand’s controller or a compatible Wi-Fi module.
03 · Wiring

The terminals behind the thermostat

Tap an element to see what it does. A working diagram, not a substitute for the manufacturer’s installation guide.

04 · Try it

Try the HONEYWELL MultiPRO 7000 TB7100A1000/U before you buy

Raise the setpoint, change the mode: see how it responds.

05 · Your savings

How much good programming can save you

Set up your typical week. The math follows the rule published by Natural Resources Canada.

06 · Winter and rebates

Winter, Rate Flex D and rebates: what this thermostat changes

With Hydro-Québec’s Rate Flex D, electricity costs less most of the winter and more during a few peak hours. A programmable thermostat does the work for you.

07 · Room by room

The sensor decides which room counts

An interactive drawing of what this kind of control does day to day.

08 · Head to head

The HONEYWELL MultiPRO 7000 TB7100A1000/U or its closest sibling?

The most useful comparison: the model right next to it in our catalogue.

09 · The right choice

The right thermostat in three questions

If this model is not the right one for you, the page says so and shows you which one is.

10 · The system

Products that go with the HONEYWELL MultiPRO 7000 TB7100A1000/U

Parts named in its spec sheet that we sell and install.

11 · Installation

Installed and set up by our technicians, in five steps

What we do at your place, in order. The on-site estimate is free.

  1. 01InspectionEquipment, stages to control and existing wiring.
  2. 02C wireCommon wire added if the model needs it and it is missing.
  3. 03MountingWall base, terminal wiring, cover plate if needed.
  4. 04SettingsEquipment type, stages, dual energy and accessories.
  5. 05Start-upConnection, app, schedule and tests with you.
12 · Specifications

HONEYWELL MultiPRO 7000 TB7100A1000/U specifications

From the manufacturer’s sheet. Type a word: the list filters as you write.

GeneralTypemulti-speed, multi-purpose thermostat, programmable or non-programmable (selectable)
GeneralStages1H/1C conventional; up to 2H/1C heat pump; 2- or 4-pipe fan coil; up to 2H/1C PTAC
GeneralSystemsconventional, heat pump, fan coil (2/4-pipe), PTAC
GeneralFan3 speeds on fan coil, 2 on PTAC; VersaSpeed ramp-up and reset algorithms
GeneralProgramming7 days, up to 4 periods per day, or non-programmable
GeneralClockreal-time, backup during a power outage, daylight saving time adjustment
GeneralFunctionsholiday override, menu-driven programming, off-wall programming
GeneralInputsremote indoor air sensor (20 K or 10 K ohms); occupancy sensor
ElectricalPower supply24 VAC or battery-powered
Format and contentsDisplaylarge backlit screen (temperature, setpoint, time)
Format and contentsColourPremier White
13 · Questions

Frequently asked questions about the HONEYWELL MultiPRO 7000 TB7100A1000/U

Short answers, no detours.

What does the HONEYWELL MultiPRO 7000 TB7100A1000/U work with?

According to the manufacturer’s sheet: conventional, heat pump, fan coil (2/4-pipe), PTAC.

Does it need a C wire?

Per the spec sheet, it can run on batteries; a common wire is still recommended when available.

Can it control electric baseboards?

No. It is a low-voltage (24 V) thermostat. 120/240 V baseboards need a line-voltage electronic thermostat.

Can it be controlled remotely?

Not directly: it has no built-in Wi-Fi.

What is the warranty?

2 years, per the manufacturer’s information.

Does AirGreen install it?

Yes. We sell and install this product in Montréal, Laval, Longueuil, the South Shore and the North Shore. The on-site estimate is free.

AirGreen · Montréal, Laval, Longueuil, South Shore, North Shore

Your thermostat, installed and set up by our technicians

We check your system and wiring, install the thermostat, connect it and program it with you. One visit, one installed price.

RBQ 5645-9605-01Ventilation, refrigeration and electrical
Free estimateon site, before any purchase
Quote in 24 hinstalled price, no surprises
Bouchervilleshowroom

Sources checked on October 5, 2026.

  • Manufacturer’s spec sheet for this product (summarized in the description and specifications above)
  • Natural Resources Canada, “Keeping the Heat In”, section 9 (modified September 29, 2025)
  • Hydro-Québec, electricity rates in effect April 1, 2026; Rate Flex D and Winter Credit Option pages (consulted October 5, 2026)
  • Énergir, smart thermostat grant (consulted October 5, 2026)

Savings shown are estimates; only Hydro-Québec and Énergir confirm a rate or a rebate.