When a heat pump runs out of steam in the middle of summer
At AirGreen , we often receive urgent calls during periods of intense heat in Montreal and the surrounding neighborhoods. This was recently the case in Saint-Laurent , where a client living in a condo building contacted us: his Midea heat pump was no longer cooling his home properly, despite maintenance performed less than a year ago. The outdoor unit, installed on a galvanized steel balcony support , appeared to be in good condition. Only superficially.
Diagnosis: fouling and progressive loss of efficiency
Upon our arrival, our technician performed a complete inspection of the HVAC system . We noticed:
-
A buildup of dust and pollen on the coil of the outdoor unit.
-
Slightly twisted fins , reducing airflow.
-
An abnormal noise coming from the fan.
-
And above all, an abnormally low pressure of the R-32 refrigerant, indicating a possible microleak.
Using our digital diagnostic tools, we confirmed that it was indeed a slow leak at the suction line connection , likely caused by slight vibrations accumulated over time.
Careful repair and performance refurbishment
To get the Midea heat pump back in top shape, our team took the following steps:
-
Safe recovery of R-32 refrigerant according to environmental standards.
-
Repair of the defective connection using high temperature brazing.
-
Nitrogen leak test to ensure complete circuit integrity.
-
Complete cleaning of the coil and straightening of the fins .
-
Recharges the system with the precise amount of R-32 refrigerant , calibrated to optimize energy performance.
-
Final check of pressures, temperatures and electrical currents .
Result: restored performance and comfort regained
As soon as I restarted, the difference was noticeable:
-
The air blown inside was 9°C colder than before the intervention .
-
The noise level of the compressor and fan has been significantly reduced.
-
The customer noticed an immediate reduction in interior temperature and increased system stability .
We also gave him some maintenance tips:
-
Clean the internal filter and the external condenser regularly.
-
Avoid covering the heat pump during the summer season.
-
Schedule an annual AirGreen inspection to prevent microleaks and ensure compressor longevity.
AirGreen expertise: reliability, precision and transparency
This type of intervention perfectly illustrates our approach:
At AirGreen , every heat pump repair is approached with technical rigor, transparency, and attention to detail. We work on all popular brands in Quebec — Midea, Fujitsu, Gree, Sharp, Goodman, Lennox , among others—offering fast service across Montreal, Laval, Longueuil, the North Shore, and the South Shore .
In this case, the Midea heat pump was restored to its original performance without requiring a complete compressor replacement, saving the customer several hundred dollars.
A typical intervention by our HVAC technicians in Saint-Laurent
This repair in Saint-Laurent demonstrates how a proper diagnosis can make all the difference. On the surface, a loss of power seemed trivial, but the underlying cause—a micro-refrigerant leak —could have led to a major failure if it hadn't been detected in time. Thanks to our methodical approach, the system was able to be put back into service the same day , ensuring the customer's comfort returned quickly.
Why trust AirGreen
-
Fast, local service throughout Greater Montreal.
-
Certified residential and commercial HVAC technicians .
-
Advanced diagnostic tools to detect problems before they escalate.
-
Compliance with environmental standards for handling refrigerants.
-
Warranty on repairs carried out .
AirGreen is more than a service: it's the promise of lasting comfort and trusted expertise in the heart of Greater Montreal.
