Project

Installation of a GREE wall-mounted heat pump in Le Sud-Ouest (Montreal)

AirGreen installs a GREE R-32 wall-mounted heat pump in a condo in the Southwest (Montreal) : optimized cooling path, reliable drainage, anti-vibration, and complete commissioning. Four-season comfort and energy savings.

By AirGreen Climatisation & Chauffage Admin7 min read
Installation of a GREE wall-mounted heat pump in Le Sud-Ouest (Montreal)
Installation of a GREE wall-mounted heat pump in Le Sud-Ouest (Montreal)
Generic diagram: wall-mounted heat pump, indoor and outdoor units

In summer, the outdoor unit rejects the house's heat outside.

Generic illustration of this type of installation, not a survey of this job site. Tap a number.

  1. Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.

  2. The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.

  3. Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.

  4. A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.

  5. The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.

  6. On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.

  7. The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.

Four-season comfort perfectly suited to condos with concrete ceilings

In this project in a condo in Southwest Montreal , our team installed a new generation R-32 GREE wall-mounted heat pump , designed to provide quiet heating and cooling in an urban environment with an exposed concrete ceiling. The goal: to stabilize the temperature year-round, limit electricity consumption and preserve a clean aesthetic — without compromising accessibility for HVAC maintenance .

Our HVAC installation method in a condo: rigor, discretion, performance

Location analysis and selection

  • Context : high-rise housing, light interior walls, concrete slab ceiling, typical of lofts in the Southwest .

  • Positioning : The indoor head is installed high on the wall , at a regular distance from the ceiling to promote air intake and avoid immediate recirculation. The unit is centered to effectively cover the main living space and serve the adjacent bedroom.

  • Aesthetics & maintenance : compliant front clearance for easy access to filters and the blower flap; discreet digital display on the front for reading the setpoint.

Specifications of installed equipment

  • Brand : GREE — the benchmark in the market for high-efficiency R-32 wall-mounted heat pumps .

  • Range : R-32 wall-mounted (high efficiency, low temperature heating).

  • Typical capacity : 9,000 to 18,000 BTU depending on the volume to be treated and the load calculation carried out by our technicians.

  • Highlights : Inverter compressor, fine modulation, reduced noise level, night/eco modes, multi-layer filtration, intelligent defrosting for Montreal winters.

Refrigeration path and power supply

  • Short and optimized route between the indoor unit and the outdoor unit (balcony/terrace), which reduces pressure losses and improves seasonal efficiency.

  • Insulated refrigeration connections , calibrated according to the actual length; brazing under nitrogen and nitrogen leak test before deep vacuum drawing.

  • Protected communication wiring ; dedicated power supply from the electrical panel according to the load (appropriate circuit breaker, approved cable).

  • Condensates : gravity drainage prioritized; if the condo configuration requires it, integration of a low-noise condensate pump with simplified maintenance.

Neat interior finish

  • Flush white chutes , large radius curves for a clean aesthetic and optimized interior airflow.

  • Mechanical fixing using anchors suitable for concrete when required, with anti-vibration insulation to prevent sound transmission to the slab.

Outdoor unit and condominium regulations

  • Installation : on anti-vibration supports and service tray for clearing the defrosting tray.

  • Runoff management in heating mode to avoid disturbing the neighbors below.

  • Compliance with the regulations of the co-ownership syndicate (size, noise level, location, snow guard or casing depending on exposure).

AirGreen commissioning and quality controls

  • Vacuum draw until reaching a stable level below 500 microns; resistance test .

  • Checking the intensities , the blowing temperature and the superheating/subcooling according to the conditions of the day.

  • Calibration of the remote control and explanations to the customer on the heating, air conditioning and dehumidification modes.

  • Submission of a commissioning report and maintenance instructions (filter cleaning, seasonal checks).

Why a GREE R-32 for an urban condo?

  • High energy efficiency (high SEER2/HSPF2) to reduce bills during peak summer and winter periods.

  • R-32 : new generation refrigerant with reduced PAG compared to R-410A, better heat exchange and lower charge.

  • Reliable heating in cold weather : GREE R-32 ranges maintain useful capacity at low temperatures, suitable for Greater Montreal winters.

  • Silence : design of the fan and casing limits noise, decisive in co-ownership.

  • Durability : Proven inverter compressor, protected electronic board, integrated diagnostics.

Result obtained at the customer's premises

  • Uniform comfort in the living area and bedroom thanks to the motorized shutter and good diffusion.

  • Measurable drop in humidity levels in summer, synonymous with greater perceived comfort even at moderate settings.

  • Controlled consumption thanks to modulation and short refrigeration path.

AirGreen Tips to Maximize Performance

  1. Filters : rinse or vacuum every 4 to 8 weeks depending on ambient dust.

  2. Remote control : choose a constant mode (Heating/Cooling) rather than Auto during the off-season to avoid unwanted switching.

  3. Instructions : Aim for 22–23°C in summer and 20–21°C in winter; the inverter works best over long, stable periods.

  4. Clearances : Do not obstruct the indoor unit with shelves or heavy curtains.

  5. Annual maintenance : inspection of the outdoor unit, defrost pan and condensate drain; deep cleaning of the exchanger if necessary.

Pitfalls to avoid in a condo

  • Poorly designed drainage : An incorrect condensate discharge point causes overflows. We check the flow or install a pump if gravity is not possible.

  • Refrigeration overload : Adding refrigerant without calculating the length can degrade efficiency and reduce compressor life.

  • Insufficient external support : vibrations are transmitted through the structure; we use anti-vibration pads and, if necessary, a distribution plate .

  • Union non-compliance : An unauthorized location may require dismantling. We handle approval upfront.

Sizing: How we determine the correct capacity (BTU)

  • Load calculation taking into account: surface area, free height (concrete slab), orientation, windows, air infiltration, occupation and internal equipment.

  • Zoning : In open plan, a single, well-positioned head often covers the living area; for multiple rooms, we offer GREE R-32 MultiZone solutions .

  • Acoustic comfort : selection of a suitable fan speed at night (<neighborhood condo>).

Grants and funding

  • High-efficiency R-32 wall-mounted heat pumps may be eligible for existing programs (depending on capacity and performance ratings). Our team validates the criteria and prepares applications for clients in Montreal, Laval, Longueuil, the North Shore and the South Shore .

  • Financing solutions available to spread the investment while immediately benefiting from energy savings.

Why AirGreen for your HVAC system ?

  • Greater Montreal specialists : hundreds of residential installations in condos, plexes and houses.

  • Measurable quality : standardized soldering, testing and commissioning procedures; complete documentation.

  • After-sales service : proactive monitoring, maintenance reminders, availability during peak periods.

  • Unbiased advice : We install multiple brands (GREE, Fujitsu, Midea, Sharp, etc.) and recommend the best solution for your space, not the other way around.

HVAC Maintenance: The Annual Game Plan

  • Spring : visual inspection, condensate test, cleaning of the crankcase and filters, cold test.

  • Autumn : check heating intensities, inspect the exterior defrosting tray, update instructions.

  • In case of odor : thorough cleaning of the indoor exchanger and fan to maintain air quality .


In short : this GREE R-32 wall-mounted heat pump , installed with a short cooling path, secure drainage and a dedicated power supply, provides quiet and energy-efficient four-season comfort perfectly suited to condos in Southwest Montreal . With AirGreen, you benefit from a meticulous, compliant HVAC installation and complete support for subsidies and maintenance .

The steps

How it goes, from the first call to the end

The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.

Step 1 of 9The on-site estimate

We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.

  1. The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
  2. The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
  3. Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
  4. The wall openingA single opening, with the slope the drain needs to flow outside.
  5. The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
  6. Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
  7. The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
  8. Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
  9. The walkthroughRemote, modes, filters: we show you the essentials before we leave.
Your numbers

And at your place?

Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.

Size checkYour baseboards, in BTU/h
–BTU/h of installed electric heat

    Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.

    Through the seasons

    What to do, season by season

    Three habits per season for this unit. They take a few minutes and prevent many calls.

    • Clean the indoor unit's filters.
    • Clear leaves and debris left on the outdoor unit by winter.
    • Test cooling before the first hot days.
    And at your place?

    Which type of equipment for your project?

    Pick what looks like your need.

    Mistakes avoided

    Four mistakes we do not make

    Flip each card to see what we do instead.

    Frequently asked questions

    What people ask us about this kind of work

    12 questions
    Does a wall-mounted heat pump heat in winter?
    Yes, it heats and cools. Its capacity drops in very cold weather; the operating range depends on the model and is listed on its spec sheet.
    Wall-mounted or multi-zone: how do I choose?
    One wall head and one condenser outside: the direct solution for a room or an open area. For two to five rooms, a multi-zone puts one head in each room on a single condenser.
    Where does the outdoor unit go?
    Where it stays above the snow, clear and accessible, away from walkways. We decide it with you during the estimate.
    Are there grants?
    Depending on the model and your situation, assistance programs may apply, including Hydro-Québec's LogisVert. AirGreen checks the model number before quoting an amount. See the grants.
    Do I need a permit?
    Rules vary from city to city: location, distances, noise. See permits and by-laws, and we check for your address.
    How cold can it heat?
    It depends on the model. According to Hydro-Québec, newer models work down to a temperature between −15 °C and −25 °C, and some cold-climate models are certified lower. The minimum temperature is on each unit's spec sheet.
    How much can I save?
    Hydro-Québec says a heat pump can be up to three times more efficient than baseboards for heating in the colder months. The result depends on the house, the climate and how it is used.
    How is the LogisVert assistance calculated?
    For ENERGY STAR cold-climate certified heat pumps, Hydro-Québec lists assistance of $120 per 1,000 BTU/h of heating capacity at −8 °C. AirGreen checks the exact model before quoting an amount; only Hydro-Québec confirms the assistance granted. See the grants.
    Is it noisy?
    The sound level depends on the model and is listed in decibels on each unit's spec sheet. Location matters too: when possible, we avoid putting the outdoor unit under a bedroom window.
    The outdoor unit is covered in ice: is that normal?
    Some frost is: the unit runs defrost cycles. Never hit the ice. If the unit stays iced up or stops heating, call us.
    Does AirGreen hold the required licences?
    Yes. AirGreen holds RBQ licence 5645-9605-01, subclasses 15.8 Ventilation, 15.10 Refrigeration and 16 Electricity.
    Is the estimate free?
    Yes. The on-site estimate is free and the quote follows within 24 hours. Book my free estimate.
    Going further

    Useful pages for what comes next

    Could this job help a neighbour?

    Share
    Similar projects

    More jobs to see, near you

    By town, by equipment or by region: browse more than 4,700 published projects.

    Each dot: a town where AirGreen has published projects. The glowing dot: this job.

    All our projects

    Your project

    Tell us about your house. We come and see it for free.

    The on-site estimate is free and the quote follows within 24 hours.

    • RBQ licence5645-9605-01 · 15.8, 15.10, 16
    • EstimateOn site, free
    • QuoteWithin 24 hours

    Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).

    Leave a comment