Job sheet · Project

Installation of a Sharp Inverter wall-mounted heat pump in Chomedey

AirGreen installs a Sharp Inverter wall-mounted heat pump in Chomedey: discreet capping near the patio door, gravity drain, short connections and rigorous commissioning. Ideal for condos in Montreal , Laval , Longueuil , North Shore , South Shore .

By AirGreen Climatisation & Chauffage Admin7 min read
City
Region
Equipment
Brand
Challenges
Published
–chapters, to open one by one
7 minto read the whole story
–type of installation
2026year published
At a glance

The job on one screen

The full story

The article, chapter by chapter

Four-season comfort in an apartment with a balcony: neat integration above the patio door

At AirGreen , we have just completed the HVAC installation of a Sharp Inverter wall-mounted heat pump in an apartment in the Chomedey sector of Laval . The project meets a common request in residential settings: efficiently air conditioning the main living area without sacrificing aesthetics, while adding reliable heating support in the spring and fall. The indoor unit is positioned above the patio door , a strategic location to cover the living room and adjoining dining room, with a blower that remains comfortable at occupant height.

Client objectives and constraints

  • Stable temperature in summer and winter, with fine modulation in mid-season.

  • Discreet integration near the curtains and the bay window, without encroaching on the furniture.

  • Easy access for periodic maintenance and filter cleaning.

  • Minimal route of refrigeration connections to the outside (balcony), in order to limit heat losses and optimize seasonal efficiency.

Technology choice and capacity

We are choosing a wall-mounted heat pump with a DC inverter compressor , which is ideal for partial load modulation. In an apartment of this size, the 9,000 to 12,000 BTU/h range covers the majority of needs, subject to insulation, facade orientation, and solar gains. The inverter continuously adjusts the speed of the compressor and fan, which:

  • reduces on/off cycles ,

  • lowers consumption when demand is moderate,

  • stabilizes temperature and improves acoustic comfort.

Interior layout: precision and finishes

  • Installation height : just below the ceiling, respecting the recommended clearances for air intake, in order to avoid any short recirculation.

  • Air diffusion : orientation of the shutters to sweep the room without direct air current towards the sofa or the dining area.

  • Finish : vertical passage in a discreet white capping adjacent to the patio door frame; neat aesthetics and easy access to the connections for future maintenance.

  • Condensate drain : gravity drain with a continuous slope towards the outside. We check the slope with a level and install an anti-siphon if necessary to ensure a smooth and quiet flow.

Outdoor route and connection management

The balcony configuration allows a very short path between the indoor head and the outdoor unit:

  • Refrigeration piping made of deoxidized copper, brazed under nitrogen, continuously insulated with closed-cell foam, then UV-sheathed to resist bad weather.

  • Communication/power cable secured to the harness, sections in accordance with the manufacturer's specifications.

  • Curve radii respected to protect the compressor and avoid any loss of load.

  • Waterproof wall penetration (compatible sealant) and interior/exterior collars for a clean finish.

Power supply and safety

  • Dedicated circuit from the electrical panel, circuit breaker calibrated according to the nominal current.

  • External disconnect switch near the condenser for disconnection during HVAC maintenance .

  • Grounding and loop management to reduce any risk of electromagnetic noise.

  • Surge protection option recommended in co-ownership to preserve the Inverter electronics.

Commissioning: method and quality controls

We apply our AirGreen protocol, a guarantee of reliability:

  1. Nitrogen test of the circuit (high pressure) to check the integrity of the brazing.

  2. Deep vacuum draw down to ≤ 500 microns , stabilization and rise test to confirm absence of moisture.

  3. Load release/adjustment according to the prescribed weight and actual length of the links.

  4. Functional control in air conditioning and heating: intensity, overheating/subcooling, supply/return temperature, and noise check in night mode.

  5. User settings : Auto/Quiet modes, timer, shutter memory position, provision of a best practices guide.

Results: immediate comfort and controlled silence

  • Even cooling of the living area, even in late sunny afternoons;

  • Efficient heating supplement in mid-season, limiting the use of baseboards;

  • Acoustics : low interior noise level, external vibrations contained thanks to the stable support and the variable speed compressor;

  • Aesthetics : capping aligned with the bay window upright, visually integrated device.


Measurable results and operating advice

Preventive maintenance: simple and cost-effective

Regular HVAC maintenance extends lifespan and preserves performance:

  • Washable filters : wash/vacuum every 4 to 8 weeks in summer;

  • Batteries (evaporator/condenser): dusting and gentle cleaning to maintain heat exchange;

  • Annual AirGreen checks : sealing, pressures/parameters, electrical tightening, condensate test, condition of UV ducts and capping.

  • Winter : Keep the defrost drain area free of ice and snow (if the condenser is on an open balcony).

Optimal daily use

  • Let the inverter modulate: avoid repeated complete shutdowns .

  • Program a stable setpoint (24–25°C for comfort cooling, 20–21°C for additional heating).

  • Use night mode to lower the noise level and soften thermal transitions.

  • Close the curtains during the sunniest hours to reduce solar gain and consumption.

Sizing: Why “right” is better than “big”

Oversizing a heat pump is detrimental to comfort (frequent shutdowns, temperature variations, noise). Accurate sizing takes into account:

  • of the actual volume to be processed,

  • solar gains (patio door),

  • of the sealing of the envelope,

  • occupation profiles .
    Our internal calculators and on-site readings guide capacity selection to balance comfort , consumption and durability .

Grants and Eligibility

Several Sharp Inverter configurations achieve high efficiencies and maintain useful capacity at low temperatures . Depending on the ENERGY STAR certification and the AHRI reference of the indoor/outdoor unit pair, the installation may be eligible for current assistance programs . We support our customers in **Montreal, Laval, Longueuil, the North Shore and the South Shore for:

  • validate the criteria (cold performance, SEER/HSPF),

  • gather evidence (technical sheet, AHRI ),

  • submit applications on time.

Mistakes to avoid (and that we often correct)

  • Lack of slope on the drain: source of odors and leaks — we systematically check the level.

  • Connections that are too long or sharply bent: pressure losses and reduced efficiency — we aim for the shortest route.

  • Unsealed drillings : risk of air/water infiltration — our penetrations are sealed and finished with collars .

  • Electrical undersizing : circuit breaker, rating and disconnect must follow the nameplate — we calibrate and test before delivery.

Why entrust your project to AirGreen?

  • Certified team accustomed to co-ownership constraints (regulations, access, nuisances).

  • Clean interior finish : aligned caps, painted/coordinated screws, clean repairs around the patio door.

  • Responsive after-sales service : maintenance, diagnostics, original parts.

  • Coverage of Greater Montreal : Montreal , Laval , Longueuil , North Shore , South Shore .

Balance sheet

This Sharp wall-mounted heat pump installation in Chomedey offers immediate comfort , low noise , and controlled consumption thanks to inverter modulation and short wiring routes . The interior head, perfectly integrated above the patio door, frees up space and distributes air evenly. With annual HVAC maintenance and appropriate use, the system will maintain its performance season after season.

Your numbers

The job tools

Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.

Size checkYour baseboards, in BTU/h
–BTU/h of installed electric heat

    Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.

    The steps

    How the job unfolds

    The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.

    Step 1 of 9The on-site estimate

    We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.

    1. The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
    2. The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
    3. Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
    4. The wall openingA single opening, with the slope the drain needs to flow outside.
    5. The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
    6. Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
    7. The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
    8. Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
    9. The walkthroughRemote, modes, filters: we show you the essentials before we leave.
    The tour

    What we check on a job like this one

    Each number is a point we check on site. Switch between summer and winter to watch air and heat move.

    Generic diagram: wall-mounted heat pump, indoor and outdoor units

    In summer, the outdoor unit rejects the house's heat outside.

    Generic illustration of this type of installation, not a survey of this job site. Tap a number.

    1. Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.

    2. The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.

    3. Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.

    4. A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.

    5. The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.

    6. On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.

    7. The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.

    At your place

    Is your home ready?

    Check what applies at your place. A "no" is not a refusal: it is what we sort out during the estimate.

    0 / 6 checked
    Maintenance

    Good habits, once the unit is in place

    Six simple habits that keep the unit going. Your list stays on this device.

    0 / 6 checked
    Through the seasons

    What to do, season by season

    Three habits per season for this unit. They take a few minutes and prevent many calls.

    • Clean the indoor unit's filters.
    • Clear leaves and debris left on the outdoor unit by winter.
    • Test cooling before the first hot days.
    For your project

    The right pages, at the right time

    True or false

    Four statements: true or false?

    It all comes down to details you have just seen.

    1. In heating mode, the outdoor unit can produce water.

    2. You pick the capacity with a simple square-footage rule.

    3. A multi-zone connects several indoor heads to a single condenser.

    4. The disconnect can sit behind the patio furniture.

    Frequently asked questions

    What people ask us about this kind of work

    12 questions
    Does a wall-mounted heat pump heat in winter?
    Yes, it heats and cools. Its capacity drops in very cold weather; the operating range depends on the model and is listed on its spec sheet.
    Wall-mounted or multi-zone: how do I choose?
    One wall head and one condenser outside: the direct solution for a room or an open area. For two to five rooms, a multi-zone puts one head in each room on a single condenser.
    Where does the outdoor unit go?
    Where it stays above the snow, clear and accessible, away from walkways. We decide it with you during the estimate.
    Are there grants?
    Depending on the model and your situation, assistance programs may apply, including Hydro-Québec's LogisVert. AirGreen checks the model number before quoting an amount. See the grants.
    Do I need a permit?
    Rules vary from city to city: location, distances, noise. See permits and by-laws, and we check for your address.
    How cold can it heat?
    It depends on the model. According to Hydro-Québec, newer models work down to a temperature between −15 °C and −25 °C, and some cold-climate models are certified lower. The minimum temperature is on each unit's spec sheet.
    How much can I save?
    Hydro-Québec says a heat pump can be up to three times more efficient than baseboards for heating in the colder months. The result depends on the house, the climate and how it is used.
    How is the LogisVert assistance calculated?
    For ENERGY STAR cold-climate certified heat pumps, Hydro-Québec lists assistance of $120 per 1,000 BTU/h of heating capacity at −8 °C. AirGreen checks the exact model before quoting an amount; only Hydro-Québec confirms the assistance granted. See the grants.
    Is it noisy?
    The sound level depends on the model and is listed in decibels on each unit's spec sheet. Location matters too: when possible, we avoid putting the outdoor unit under a bedroom window.
    The outdoor unit is covered in ice: is that normal?
    Some frost is: the unit runs defrost cycles. Never hit the ice. If the unit stays iced up or stops heating, call us.
    Does AirGreen hold the required licences?
    Yes. AirGreen holds RBQ licence 5645-9605-01, subclasses 15.8 Ventilation, 15.10 Refrigeration and 16 Electricity.
    Is the estimate free?
    Yes. The on-site estimate is free and the quote follows within 24 hours. Book my free estimate.

    Could this job help a neighbour?

    Share
    Similar projects

    More jobs to see, near you

    By town, by equipment or by region: browse more than 4,700 published projects.

    Each dot: a town where AirGreen has published projects. The glowing dot: this job.

    All our projects

    Your project

    An on-site estimate, the right capacity, the right equipment.

    The on-site estimate is free and the quote follows within 24 hours.

    • RBQ licence5645-9605-01 · 15.8, 15.10, 16
    • EstimateOn site, free
    • QuoteWithin 24 hours

    Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).

    Leave a comment