Job sheet · Project

Installation of a MIDEA EVOX G3 2.5-ton central heat pump in Vaudreuil-Dorion

AirGreen installs a 2.5-ton MIDEA EVOX G3 central heat pump in Vaudreuil-Dorion: uniform comfort, meticulous HVAC installation, wall brackets, and performance adapted to Quebec's climate.

By AirGreen Climatisation & Chauffage Admin13 min read
City
Region
Equipment
Brand
Challenges
Published
–chapters, to open one by one
13 minto read the whole story
–type of installation
2026year published
At a glance

The job on one screen

Installation of a MIDEA EVOX G3 2.5-ton central heat pump in Vaudreuil-Dorion
Installation of a MIDEA EVOX G3 2.5-ton central heat pump in Vaudreuil-Dorion
The unit

The unit’s data sheet

The range as published on airgreen.ca: pick a size to see its capacity in deep cold.

The range, size by size
SizeHeating at −8 °CHeating at −15 °CColdest certified pointCOP at −15 °CSEERHSPFIndicative LogisVert aid
Midea EVOX G3 · 1.5 tons14,70018,600−30 °C: 11,8002.1219.010.1$1,764
Midea EVOX G3 · 2 tons20,80020,600−30 °C: 12,1002.1418.610.0$2,496
Midea EVOX G3 · 2.5 tons24,00033,200−30 °C: 17,9001.9717.210.8$2,880
Midea EVOX G3 · 3 tons33,00037,400−30 °C: 27,6001.918.010.0$3,960
Midea EVOX G3 · 4 tons39,50048,000−30 °C: 27,2002.017.59.5$4,740
Midea EVOX G3 · 5 tons45,00054,000−30 °C: 37,3001.917.59.5$5,400

Data read live from the airgreen.ca page of each size (NEEP / AHRI certified performance). When the title names the installed size, it is highlighted; otherwise the whole range is shown. The aid shown is today’s, using Hydro-Québec’s rule ($120 per 1,000 BTU/h at −8 °C); amounts quoted in the article date from its publication. Only Hydro-Québec confirms the assistance granted.

The full story

The article, chapter by chapter

A Central Installation Designed for the Lasting Comfort of a Family Home in Vaudreuil-Dorion

In Vaudreuil-Dorion, the efficiency of a heating and air conditioning system is not solely measured by the unit's capacity. It is primarily measured by the quality of the HVAC installation, the system's adaptation to the home, the positioning of the outdoor unit, the management of existing ducts, and the team's ability to foresee the details that will make all the difference during cold winters as well as humid July days.

For this project, our AirGreen team installed a 2.5-ton MIDEA EVOX G3 central heat pump, a solution suitable for homes that already have a duct network and wish to standardize comfort throughout all rooms. Unlike a wall-mounted heat pump, which primarily serves a specific zone, a central heat pump works with the existing air distribution to heat and cool the entire residence more uniformly.

The photo shows the MIDEA outdoor unit installed on sturdy wall brackets, at a carefully chosen height above the ground. This detail may seem simple, but it is essential in a region like Vaudreuil-Dorion, where snow accumulation, ice, freeze-thaw cycles, and humidity can affect the performance and durability of an outdoor system. The unit is well cleared in front, solidly anchored, and positioned to promote good airflow around the condenser.

Why a 2.5-ton central heat pump for this home?

The choice of a 2.5-ton central heat pump is never random. Before recommending a unit, we evaluate several factors: living area, insulation, room configuration, sun exposure, quality of the duct network, desired comfort level, and existing equipment.

In this specific case, the house required a solution capable of meeting two main needs:

  • ensuring stable air conditioning during hot and humid periods;
  • providing efficient heating for a large part of the cold season, while working complementarily with the existing system when necessary.

The 2.5-ton capacity represents an interesting balance for many single-family homes in Vaudreuil-Dorion, especially when ducts are well-distributed and the building envelope allows for good heat retention. A unit that is too small would work constantly without achieving the desired comfort. A unit that is too large would have too many short cycles, which can impair dehumidification, increase wear and tear, and reduce actual comfort.

At AirGreen, we pay particular attention to this sizing. A poorly sized but high-performing heat pump can yield disappointing results, even if the brand and model are of good quality. This is why our approach relies on a concrete analysis of the home, and not just a quick estimate based on square footage.

The MIDEA EVOX G3: A Modern Central Solution for the Quebec Climate

The MIDEA EVOX G3 is a popular range for residential installations requiring a reliable, modern central solution adapted to the realities of Quebec. In a region like Greater Montreal, including Montreal, Laval, Longueuil, the North Shore, and the South Shore, homeowners often look for a unit capable of reducing reliance on conventional electric heating while improving summer comfort.

This central heat pump offers several concrete advantages for a ducted home:

  • air distribution to multiple rooms from a single central system;
  • more uniform comfort than a localized unit in a single zone;
  • potential reduction in heating costs depending on usage, insulation, and electricity rates;
  • quieter indoor operation, as the main unit works with the central ventilation system;
  • compatibility with a hybrid or complementary heating strategy depending on the residence's configuration.

In this installation, the goal was not merely to replace or add equipment. It was about integrating a central MIDEA heat pump into an existing environment, with particular attention to mechanical stability, outdoor clearance, snow protection, and long-term operational optimization.

An outdoor unit installed on wall brackets: a strategic choice

One of the most visible elements of this installation is the wall-mounting of the outdoor unit. We installed the condenser on sturdy metal brackets, fixed to the foundation, with sufficient clearance from the ground.

This choice offers several important advantages:

  • the unit is protected from snow accumulation on the ground;
  • seasonal maintenance is easier;
  • natural drainage around the unit is improved;
  • vibrations are better controlled when brackets are well-selected and properly installed;
  • the ground space around the house remains clearer.

In Vaudreuil-Dorion, this precaution is particularly relevant. Properties can be exposed to cold winds, blowing snow, snow accumulation near exterior walls, and rapid temperature variations. A unit installed too low risks having its heat exchanger obstructed by snow or ice, which can impair performance and lead to avoidable service calls.

We also considered the proximity of the exterior cladding, the downspout, front and side airflow, as well as accessibility for future HVAC maintenance. A good installation is often noticed by what doesn't cause problems in the following years.

Specific challenges encountered on this project

Every house has its constraints. In this project, the main challenge was to integrate the outdoor unit into a relatively compact space, close to existing elements such as the foundation, cladding, gutter, and certain external structures. The goal was to maintain a clean, functional, and safe positioning, without compromising the unit's performance.

Our technicians therefore paid particular attention to several points:

Clearance around the condenser

A central heat pump needs to breathe properly. The front fan must be able to expel air without obstruction, while the sides and back must allow for efficient heat exchange. Poor airflow can reduce performance, increase operating pressure, and accelerate the wear of certain components.

Anchoring strength

The outdoor unit is heavy and subject to normal vibrations during operation. The wall brackets must be installed with anchors appropriate for the foundation material. Approximate fastening can lead to noise, sagging, unpleasant vibrations, or long-term problems.

Water and ice drainage

In heating mode, a heat pump produces water during defrost cycles. Therefore, it is necessary to anticipate where this water will drain and how it will behave in winter. A successful installation takes this reality into account to avoid excessive ice formation under the unit or near passageways.

Overall appearance

While performance remains a priority, aesthetics also matter. On this installation, the result is clean and discreet. The positioning of the unit respects the side facade of the house and integrates well with the existing environment. The AirGreen sticker visible on the unit also reflects our commitment to leaving behind an installation we are proud of.

What This Installation Specifically Provides for Homeowners

Once the 2.5-ton MIDEA EVOX G3 central heat pump is installed, homeowners benefit from a system capable of transforming daily comfort. Air is distributed through the ducts, allowing for a more balanced temperature in bedrooms, common areas, and areas further away from the mechanical equipment.

More stable comfort, room by room

One of the major advantages of a central solution is the feeling of less localized comfort. With a wall-mounted air conditioner, some homes get excellent results in the open living area, but upstairs bedrooms or more enclosed rooms may remain less well served. A central heat pump, when properly connected to a functional duct network, allows for better air distribution throughout the entire house.

For families in Vaudreuil-Dorion, this type of installation is particularly interesting when several people occupy different rooms at the same time. Comfort does not depend on a single supply point. It becomes more uniform, more natural, and often more pleasant in the long run.

A relevant solution for reducing energy consumption

A heat pump does not create heat in the same way as an electric baseboard or a resistive element. It moves heat, which can offer better energy efficiency under many conditions. In air conditioning mode, it also allows for better control of indoor temperature and humidity with greater consistency, provided that sizing and installation are carried out correctly.

In the current context, several homeowners in Montreal, Laval, Longueuil, the North Shore, and the South Shore contact us to better understand the potential savings. We always explain that results vary depending on insulation, heating habits, desired temperature, maintenance, house configuration, and the state of the air distribution network. Our role is to recommend a realistic solution, not to promise universal results.

Potential eligibility for subsidies

Financial assistance programs for heat pumps can represent a significant advantage for Quebec homeowners. Depending on the exact model, configuration, current criteria, and requirements of the applicable program, a MIDEA EVOX G3 central heat pump may be eligible for certain energy subsidies.

At AirGreen, we assist our clients in understanding the necessary documents: invoice, proof of installation, installed model, technical information, and claim steps. We also remind them that criteria can change and it is important to validate eligibility according to the requirements in force at the time of the project.

Mistakes to avoid when installing a central heat pump

A central installation requires more than just a simple connection. Here are some common mistakes we see in the field and systematically avoid:

Choosing capacity solely based on area

Two houses of the same size can have very different needs. Insulation, windows, orientation, ceilings, ducts, and lifestyle habits directly influence the choice of appliance.

Neglecting the ductwork

A central heat pump depends on the quality of air distribution. Undersized, poorly insulated, leaky, or unbalanced ducts can reduce comfort, even with an excellent unit.

Installing the outdoor unit too close to the ground

In Quebec, this mistake can be costly. Snow, ice, and lack of clearance can impair performance and cause problems in winter.

Forgetting regular maintenance

Good HVAC maintenance extends the life of the system. Filters, coils, drains, electrical connections, and outdoor clearances must be checked periodically.

Comparing only the initial price

The purchase price doesn't tell the whole story. A cheaper but poorly planned installation can generate additional costs, service calls, noise, premature wear, or inferior performance.

The AirGreen Approach: Precision, Cleanliness, and Responsibility

This project in Vaudreuil-Dorion perfectly illustrates our way of working. We don't treat an HVAC installation as a mere equipment setup. We analyze the environment, anticipate seasonal constraints, choose appropriate supports, check clearances, and leave a clean, accessible, and durable installation.

Our team regularly works on similar projects in Montreal, Laval, Longueuil, on the North Shore, and the South Shore. Each region has its specificities: old houses in Montreal, bungalows and family homes in Laval, multi-generational properties on the South Shore, newer constructions in Vaudreuil-Dorion, houses exposed to winds on the North Shore. This experience allows us to adapt our recommendations to the actual site rather than to an isolated technical sheet.

A discreet, solid result adapted to the local climate

The final result of this installation is understated and professional. The MIDEA outdoor unit is installed at an adequate height, well-aligned, securely fixed, and positioned to respect airflow needs. The front of the unit remains easily accessible for inspection and maintenance, while its location limits risks associated with snow accumulation.

For homeowners, this type of installation means more than new equipment. It's an investment in daily comfort, thermal stability, energy efficiency, and peace of mind. A well-installed 2.5-ton MIDEA EVOX G3 central heat pump can improve the quality of life in the home, especially when the project is rigorously planned from the outset.

Practical advice for homeowners in Vaudreuil-Dorion

After an installation like this, we recommend a few simple best practices:

  • keep the space in front of the outdoor unit clear at all times;
  • remove excessive snow around the unit without using objects that could damage the fins;
  • replace or clean filters according to system recommendations;
  • avoid blocking supply and return air grilles indoors;
  • schedule regular professional maintenance;
  • monitor for unusual noises, excessively short cycles, or abnormal temperature variations.

These simple actions help maintain system performance and reduce the risk of problems throughout the seasons.

An Installation that Reflects AirGreen Standards

This installation of a MIDEA EVOX G3 2.5-ton central heat pump in Vaudreuil-Dorion demonstrates the importance of well-executed work, from appliance selection to the final securing of the outdoor unit. Choosing the right equipment matters, but the quality of the installation remains crucial.

At AirGreen, we focus on comprehensive HVAC solutions, tailored to the building, the Quebec climate, and the real expectations of clients. Whether it's a central heat pump, a wall-mounted air conditioner, a multi-zone system, or a complete replacement, our goal remains the same: to provide reliable comfort, a clean installation, and lasting performance.

Your numbers

The job tools

Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.

Before / afterThe cost of the same heat

Baseboards and electric furnaces turn 1 kWh of electricity into 1 kWh of heat. A heat pump delivers more: that is its COP. At Hydro-Québec’s rate D (11.142¢/kWh above 40 kWh a day, since 1 April 2026):

Before · baseboards11.142¢/kWh
After · heat pump–

Hydro-Québec: a heat pump can be up to three times more efficient than baseboards for heating in the colder months.

Estimate per kWh of heat, at the chosen temperature, using the certified COP from the product page. Taxes, access charge and backup heat not included.

Size checkYour electric furnace, in BTU/h
–BTU/h of installed electric heat

    Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.

    The steps

    How the job unfolds

    The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.

    Step 1 of 9The on-site estimate

    We look at the ducts, the current indoor module, the electrical panel and the planned spot for the outdoor unit.

    1. The on-site estimateWe look at the ducts, the current indoor module, the electrical panel and the planned spot for the outdoor unit.
    2. The quoteThe equipment combination, capacity and price, in writing. We check whether the combination qualifies for assistance programs.
    3. Getting readyAccess protected, old unit disconnected and removed when it is being replaced.
    4. The indoor moduleElectric furnace or air handler, with its coil, connected to the supply and return ducts.
    5. The outdoor unitOn a level base, raised above the snow, with free space all around.
    6. The refrigerant linesInsulated, they enter through a sealed opening and run to the indoor coil.
    7. Electrical and thermostatDedicated circuits, accessible disconnect, a thermostat that works with the heat pump and the backup heat.
    8. Tests and start-upLeak test, vacuum, start-up, airflow check and a test of both modes.
    9. The walkthroughFilter, thermostat, backup heat in extreme cold: what to know before winter.
    The tour

    What we check on a job like this one

    Each number is a point we check on site. Switch between summer and winter to watch air and heat move.

    Generic diagram: central heat pump, indoor module and ducts

    In summer, the outdoor unit rejects the house's heat outside.

    Generic illustration of this type of installation, not a survey of this job site. Tap a number.

    1. It captures or rejects heat outside. It sits on a level base, above the snow, with free space all around.

    2. The insulated refrigerant lines enter the house through a sealed opening and run to the indoor coil.

    3. A shut-off switch near the outdoor unit isolates it safely for service.

    4. Sitting on the indoor module, it moves heat between the house air and the refrigerant.

    5. Electric furnace or air handler: its fan pushes air through the ducts. The electric backup takes over in extreme cold.

    6. Supply ducts bring air to the rooms; returns bring it back to the unit. Their condition matters as much as the unit's.

    7. It protects the coil and the fan. A dirty filter cuts airflow, so it gets checked regularly.

    8. It runs the heat pump and the backup heat. It must be compatible with the installed system.

    At your place

    Is your home ready?

    Check what applies at your place. A "no" is not a refusal: it is what we sort out during the estimate.

    0 / 6 checked
    Maintenance

    Good habits, once the unit is in place

    Six simple habits that keep the unit going. Your list stays on this device.

    0 / 6 checked
    Through the seasons

    What to do, season by season

    Three habits per season for this unit. They take a few minutes and prevent many calls.

    • Check the indoor module's filter.
    • Clear winter debris from the outdoor unit.
    • Test cooling before the heat arrives.
    For your project

    The right pages, at the right time

    True or false

    Four statements: true or false?

    It all comes down to details you have just seen.

    1. A central heat pump uses the house's ducts.

    2. In extreme cold, electric backup heat can take over.

    3. The filter only gets changed when the unit breaks down.

    4. You can reuse the old unit's size without checking.

    Frequently asked questions

    What people ask us about this kind of work

    11 questions
    Can I keep my current ducts?
    Often, yes: the central heat pump connects to the existing ducts. We check their condition and size during the estimate.
    What happens in extreme cold?
    The indoor module (furnace or air handler) works with the central heat pump and takes over in extreme cold.
    Furnace, air handler, ducted: what is the difference?
    The furnace or air handler is the indoor module of the central system. A ducted system hides in the ceiling: all you see are small supply grilles.
    Are there grants?
    Depending on the equipment and your situation, assistance programs may apply. AirGreen checks the exact combination before quoting an amount. See the grants.
    Do I need a permit?
    Rules vary from city to city. See permits and by-laws, and we check for your address.
    How much can I save?
    Hydro-Québec says a heat pump can be up to three times more efficient than baseboards for heating in the colder months. The result depends on the house, the climate and how it is used.
    How is the LogisVert assistance calculated?
    For ENERGY STAR cold-climate certified heat pumps, Hydro-Québec lists assistance of $120 per 1,000 BTU/h of heating capacity at −8 °C. AirGreen checks the exact model before quoting an amount; only Hydro-Québec confirms the assistance granted. See the grants.
    Will my current thermostat work?
    Not always: the thermostat has to run the heat pump and the backup heat. We check compatibility during the estimate.
    Central or wall units: which one?
    If the house has ducts in good shape, a central system heats and cools every room at once. Without ducts, wall units or a multi-zone are often simpler. We compare on site.
    Does AirGreen hold the required licences?
    Yes. AirGreen holds RBQ licence 5645-9605-01, subclasses 15.8 Ventilation, 15.10 Refrigeration and 16 Electricity.
    Is the estimate free?
    Yes. The on-site estimate is free and the quote follows within 24 hours. Book my free estimate.

    Could this job help a neighbour?

    Share
    Similar projects

    More jobs to see, near you

    By town, by equipment or by region: browse more than 4,700 published projects.

    Each dot: a town where AirGreen has published projects. The glowing dot: this job.

    All our projects

    Your project

    An on-site estimate, the right capacity, the right equipment.

    The on-site estimate is free and the quote follows within 24 hours.

    • RBQ licence5645-9605-01 · 15.8, 15.10, 16
    • EstimateOn site, free
    • QuoteWithin 24 hours

    Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).

    Leave a comment