Gree wall-mounted heat pump installation in Brossard

When these clients from Brossard contacted us, their goal was clear: to replace inefficient heating and cooling solutions with a modern, quiet, and economical system capable of providing true year-round comfort. We recommended the installation of a Gree Inverter R32 wall-mounted heat pump , perfectly suited to a single-family home on the South Shore.

The context of the project in Brossard

The property is a recently built house with red vinyl siding, typical of many residential neighborhoods in Brossard. The clients wanted:

• A discreet system that does not detract from the facade;

• A device capable of effectively cooling the ground floor in summer;

• An efficient supplementary heating solution for mid-season and moderate cold weather;

• A very low noise level, both inside and outside.

Taking into account the configuration of the house and the targeted energy consumption, our team recommended a Gree Inverter R32 wall-mounted heat pump of approximately 12,000 BTU , an ideal capacity for an open main living area (living room, dining room, kitchen).

The solution: a Gree Inverter R32 wall-mounted heat pump

The Gree brand is known for its reliable, efficient, and very quiet wall-mounted systems. The model installed here is a new-generation Gree Inverter R32 wall-mounted heat pump , which offers:

• Inverter technology to continuously modulate power, reduce on/off cycles and optimize consumption;

• R32 (A2L) refrigerant, more efficient and with a reduced global warming potential compared to R410A;

• An excellent compromise between comfort, energy efficiency and budget;

• Stable operation both in air conditioning mode in summer and in heating mode during the cooler temperatures of spring and autumn.

Inside, the wall-mounted unit was positioned in the center of the living area to maximize airflow and prevent hot or cold spots. The airflow is gentle and even, allowing you to quickly feel the difference without any unpleasant drafts.

An elevated outdoor installation designed for Quebec winters

The photo clearly shows the Gree outdoor unit installed against the house wall. Several technical choices were made to ensure the installation's durability and ease of maintenance:

• Elevated aluminum support : the unit rests on a solid metal structure, itself fixed to concrete slabs. This elevation keeps the condenser a safe distance from the ground, protected from snow, ice, standing water and debris.

• Stability and leveling : the concrete slabs have been adjusted to provide a flat and stable surface, preventing excessive vibration or twisting of the chassis.

• Sufficient clearance around the unit : the unit is installed with the necessary space at the rear and on the sides to ensure good air circulation and facilitate maintenance interventions.

• Protection of the coating : the fixings and conduit passages have been designed to preserve the integrity of the house's vinyl coating, limiting unnecessary drilling.

The refrigerant lines, power cable and condensation drain are grouped and protected in a discreet external cover, for a clean aesthetic and additional protection against the elements.

Four-season performance and comfort in Brossard

Thanks to this Gree Inverter R32 wall-mounted heat pump , customers now benefit from:

• Effective air conditioning during the summer heat waves, even during the frequent heat waves in Greater Montreal;

• Economical heating in the mid-season , allowing for reduced use of the main system and lower electricity bills;

• It operates very quietly , both indoors and outdoors, an important advantage in dense residential areas;

• Better humidity control improves the feeling of comfort and protects the home.

Inverter technology allows the heat pump to adjust its power according to actual demand. The result: fewer temperature fluctuations, optimized energy consumption, and a potentially longer lifespan thanks to gentler operation.

A safe and compliant installation

Our certified technicians carried out the installation in compliance with current standards and industry best practices:

• Refrigeration connection with vacuuming and leak testing ;

• Checking the electrical wiring and the dedicated circuit breaker;

• Complete commissioning with performance measurements;

• Detailed explanations to owners on the use of the remote control, operating modes and basic maintenance (cleaning filters, clearing the outdoor unit, etc.).

The R32 (A2L) label visible on the unit indicates that the system uses a modern, high-performance, and mildly flammable refrigerant. Our teams are trained to handle these refrigerants safely, in accordance with Code requirements and the manufacturer Gree's recommendations.

Why choose AirGreen for your Gree heat pump in Brossard?

At AirGreen , we support homeowners in Greater Montreal at every stage of their heat pump project:

• Building analysis and personalized recommendations;

• Selecting the right capacity and configuration (wall-mounted, multi-zone, central, etc.);

• Professional installation by experienced technicians;

• After-sales support, maintenance and service as needed.

Whether you live in Brossard, Boucherville, Saint-Lambert, Longueuil or elsewhere on the South Shore , we can offer you high-performance Gree solutions tailored to your home, your budget and your energy situation.

Are you considering a Gree heat pump for your home?

If you too would like to improve your comfort while reducing your energy consumption, our team will be happy to assess your project.

Contact us for a free quote and discover how a Gree Inverter R32 wall-mounted heat pump , installed by AirGreen, can transform your home comfort, summer and winter.