Installation of a Sharp THU Wall-Mounted Heat Pump in Rivière-des-Prairies–Pointe-aux-Trembles
Embark on a comfort journey with AirGreen as we unveil the installation of a game-changing Sharp THU Wall-Mounted Heat Pump - your passport to a home where efficiency meets unparalleled comfort!
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
A Stellar Upgrade for Sustainable Comfort
Embarking on a Comfort Journey
At AirGreen, we recently embarked on an intriguing installation adventure in the heart of Rivière-des-Prairies–Pointe-aux-Trembles, Montreal. Our mission was clear: replace an aging 12,000 BTU heat pump that was no longer meeting the homeowner’s comfort needs with a robust, efficient, and powerful Sharp THU Wall-Mounted Heat Pump.
Why the Sharp THU?
- Size Matters: With a whopping 18,000 BTU, the Sharp THU doesn’t just cool; it dominates, providing unparalleled heating and cooling efficiency.
- Multi Space Function: Unique to Sharp, this feature ensures uniform and balanced air distribution across multiple rooms, creating a harmonious living environment.
- Customizable Comfort: The adjustable flap allows for personalized airflow direction, ensuring optimal comfort tailored to your preference.
Installation Chronicles: A Staircase Conundrum
Our journey began with a challenge. The previous 12,000 BTU unit perched atop a staircase had seen better days. With escalating repair costs and diminishing efficiency, a replacement was inevitable. Enter the Sharp THU - a beacon of efficiency and reliability.
The Installation Process: Precision Meets Expertise
- Location: The strategic placement atop the staircase maximizes airflow and ensures consistent temperature regulation throughout the home.
- Difficulty: With a medium difficulty level, our seasoned technicians navigated the installation process with precision and expertise, ensuring a seamless transition from the old to the new.
Sharp THU: A Symphony of Features
- Cooling & Heating Mastery: With a cooling capacity of 18,000 BTU and the ability to heat efficiently even at -27°C, the THU is a true all-season companion.
- Silent Operation: With sound pressure levels as low as 25 dB(A) indoors and 52 dB(A) outdoors, the THU operates whisper-quiet, providing comfort without the noise.
- Energy Efficiency: Boasting a 21.0 SEER efficiency rating and Energy Star® certification, the THU is a testament to Sharp’s commitment to sustainable comfort solutions.
Grants & Warranty: Value Unmatched
- Federal & Provincial Grants: With eligibility for substantial grants, investing in the THU is not just a choice for comfort but also a financially savvy decision.
- Warranty: A comprehensive 10-10-10 warranty (Compressor - Parts - Labor) with an included extended warranty offers peace of mind for years to come.
Conclusion: A Comfort Revolution
With the Sharp THU Wall-Mounted Heat Pump, comfort has been redefined and elevated. Its installation at Rivière-des-Prairies–Pointe-aux-Trembles is a testament to AirGreen’s commitment to delivering sustainable, efficient, and unparalleled HVAC solutions to the residents of Montreal, Laval, Longueuil, North Shore, and South Shore.
How it goes, from the first call to the end
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
Model, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
Floors and furniture protected, wall plate position marked level, wall opening located.
A single opening, with the slope the drain needs to flow outside.
Set on a stand raised above the snow, with the clearances the manufacturer requires.
Connected, insulated and protected. The opening is then sealed against water, cold air and insects.
A dedicated circuit and an accessible disconnect near the outdoor unit.
Leak test, vacuum, then start-up and a check of heating and cooling.
Remote, modes, filters: we show you the essentials before we leave.
- The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
- The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
- Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
- The wall openingA single opening, with the slope the drain needs to flow outside.
- The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
- Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
- The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
- Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
- The walkthroughRemote, modes, filters: we show you the essentials before we leave.
And at your place?
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
Which type of equipment for your project?
Pick what looks like your need.
Four mistakes we do not make
Flip each card to see what we do instead.
What people ask us about this kind of work
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
How cold can it heat?
How much can I save?
How is the LogisVert assistance calculated?
Is it noisy?
The outdoor unit is covered in ice: is that normal?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
Useful pages for what comes next
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
Tell us about your house. We come and see it for free.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).