Installation of a Sharp TU Wall-Mounted Heat Pump in Repentigny, North Shore
Experience the Sharp TU Wall-Mounted Heat Pump installed by AirGreen! Dive into a world where air purification meets efficiency, and quiet operation dances with power, all under a warranty that assures peace of mind.
- City
- Region
- Equipment
- Brand
- Challenges
- Published
The job on one screen
The article, chapter by chapter
Revolutionizing Air Quality with Precision and Style
A Breath of Fresh Air in Repentigny
AirGreen is thrilled to unveil our recent installation in the serene and beautiful Repentigny, located on the North Shore. This project is a testament to our commitment to providing top-notch HVAC services in Montreal, Laval, Longueuil, North Shore, and South Shore.
The Sharp TU: A Wall-Mounted Marvel
Our client in Repentigny was struggling with air quality issues in their home. Without an air exchanger, and facing prohibitive costs for installing one, they needed a powerful, affordable solution. Enter the Sharp TU Wall-Mounted Heat Pump – a machine that doesn’t just filter air but purifies it to perfection.
Plasmacluster Technology: Nature’s Genius, Captured
- True Air Purification: The Sharp TU boasts Plasmacluster technology, exclusive to Sharp products. This groundbreaking feature imitates and reproduces natural air purification, standing head and shoulders above the competition.
- Unparalleled Health Protection: With its ability to neutralize airborne bacteria, viruses, and eliminate mold and contaminants, the Plasmacluster technology not only purifies the air but actively contributes to your health.
How Plasmacluster Works: A Symphony of Science
- Ion Diffusion: The technology releases positive (H+) and negative (O2-) ions, identical to those found in nature, enveloped in water molecules for longevity.
- Ion Transformation: These ions create highly oxidized hydroxyl radicals that attack allergens, viruses, and mold, effectively neutralizing them.
- Water Creation: The radicals then combine with hydrogen to transform back into water, seamlessly integrating with the ambient air.
Sharp TU: Not Just a Pretty Face
- Cooling Capacity: With 18,000 BTU, it’s a powerhouse in a sleek package.
- Heating in the Cold: It operates efficiently even at -20°C.
- Silent Operation: With a sound pressure level as low as 24 dB(A) indoors, it whispers while it works.
- Energy Efficiency: With a 21.0 SEER rating and Energy Star® certification, it’s a friend to both the environment and your wallet.
Installation Details: Crafted with Care
Our team approached this medium-difficulty installation with precision and dedication, ensuring a snug fit and optimal operation for the Sharp TU’s dimensions. The result? A seamless integration of powerful technology and elegant design, ready to serve our client for years to come.
Warranty and Support: We’ve Got Your Back
With a 10-year warranty on compressor, parts, and labor, and an included extended warranty, we stand firmly behind the quality and durability of our installations. Your peace of mind is our top priority.
Provincial Grant Admissibility: Savings Galore
This model is eligible for a $600 Provincial Grant, making it an even more attractive investment for homeowners looking for quality and affordability in one package.
Choose AirGreen: Where Quality Meets Care
At AirGreen, we don’t just install HVAC systems. We provide solutions that improve your life and well-being. With our recent installation in Repentigny, we’ve once again demonstrated our ability to meet the unique needs of our clients with products and services that truly stand out.
The job tools
Two quick checks with real numbers: what heat costs, and what your current heaters add up to in BTU/h.
Conversion: 1 W = 3.412 BTU/h. An indication, not a load calculation: baseboards and furnaces are often stronger than the real need, and they can stay as backup. AirGreen confirms the capacity on site.
How the job unfolds
The main steps of this kind of job at AirGreen. Every house has its quirks: the estimate brings them out.
We look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
Model, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
Floors and furniture protected, wall plate position marked level, wall opening located.
A single opening, with the slope the drain needs to flow outside.
Set on a stand raised above the snow, with the clearances the manufacturer requires.
Connected, insulated and protected. The opening is then sealed against water, cold air and insects.
A dedicated circuit and an accessible disconnect near the outdoor unit.
Leak test, vacuum, then start-up and a check of heating and cooling.
Remote, modes, filters: we show you the essentials before we leave.
- The on-site estimateWe look at the room, the outside wall, the line route and where the outdoor unit will go. That is where the capacity gets chosen.
- The quoteModel, capacity and price, in writing. We also check whether the model qualifies for assistance programs.
- Getting readyFloors and furniture protected, wall plate position marked level, wall opening located.
- The wall openingA single opening, with the slope the drain needs to flow outside.
- The outdoor unitSet on a stand raised above the snow, with the clearances the manufacturer requires.
- Lines, cable and drainConnected, insulated and protected. The opening is then sealed against water, cold air and insects.
- The electrical workA dedicated circuit and an accessible disconnect near the outdoor unit.
- Tests and start-upLeak test, vacuum, then start-up and a check of heating and cooling.
- The walkthroughRemote, modes, filters: we show you the essentials before we leave.
What we check on a job like this one
Each number is a point we check on site. Switch between summer and winter to watch air and heat move.
In summer, the outdoor unit rejects the house's heat outside.
Generic illustration of this type of installation, not a survey of this job site. Tap a number.
Mounted level on a wall plate, high enough for the air to reach the whole room, with enough space around it to slide the filters out easily.
The refrigerant lines, the communication cable and the drain go through the wall in a single opening, sealed against water, cold air and insects.
Two insulated copper pipes connect the two units. Outside, a line cover can protect them from sun, knocks and weather.
A shut-off switch near the outdoor unit isolates it safely for service. It must stay accessible at all times.
The compressor and the fan. In heating mode it captures heat from the outdoor air, even in winter, and moves it inside.
On the ground or on the wall, it keeps the unit above accumulated snow. The unit stays clear and defrost water can drain away.
The fan needs to blow freely. Storage, a fence or a wall too close, and efficiency drops while noise goes up.
Is your home ready?
Check what applies at your place. A "no" is not a refusal: it is what we sort out during the estimate.
Good habits, once the unit is in place
Six simple habits that keep the unit going. Your list stays on this device.
What to do, season by season
Three habits per season for this unit. They take a few minutes and prevent many calls.
- Clean the indoor unit's filters.
- Clear leaves and debris left on the outdoor unit by winter.
- Test cooling before the first hot days.
- Clean the filters more often when the unit runs a lot.
- Keep plants away from the outdoor unit.
- Check that no water drips from the indoor unit.
- Rake the leaves around the outdoor unit.
- Test heating before the first cold days.
- Book periodic maintenance before winter.
- Keep snow away from the stand and the front of the unit.
- Let the unit defrost: it is normal.
- Never hit the ice on the fins; call us if the unit stays iced up.
The right pages, at the right time
Four statements: true or false?
It all comes down to details you have just seen.
1. In heating mode, the outdoor unit can produce water.
During defrost cycles. That water must drain away without forming ice.
2. You pick the capacity with a simple square-footage rule.
Windows, insulation, orientation and how the room is used all count. Capacity is chosen on site.
3. A multi-zone connects several indoor heads to a single condenser.
One head per room, all on the same condenser. Each room keeps its own temperature.
4. The disconnect can sit behind the patio furniture.
It must stay accessible: it is what shuts the unit off for service.
0 / 4 right answers
What people ask us about this kind of work
Does a wall-mounted heat pump heat in winter?
Wall-mounted or multi-zone: how do I choose?
Where does the outdoor unit go?
Are there grants?
Do I need a permit?
How cold can it heat?
How much can I save?
How is the LogisVert assistance calculated?
Is it noisy?
The outdoor unit is covered in ice: is that normal?
Does AirGreen hold the required licences?
Is the estimate free?
No question matches. Write to us: we answer.
More jobs to see, near you
By town, by equipment or by region: browse more than 4,700 published projects.
Each dot: a town where AirGreen has published projects. The glowing dot: this job.
An on-site estimate, the right capacity, the right equipment.
The on-site estimate is free and the quote follows within 24 hours.
Text and photo: a real AirGreen Climatisation & Chauffage job. The diagrams are generic illustrations of the type of installation, not a survey of this job site. Sources of the added figures: airgreen.ca product pages (NEEP / AHRI performance), Hydro-Québec (Heat pumps page, LogisVert, read on 13 October 2026), Régie de l’énergie (rate D as of 1 April 2026).